From: Yakir Yang <ykk@rock-chips.com>
To: Russell King <rmk+kernel@arm.linux.org.uk>,
linux-rockchip@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
Andy Yan <andy.yan@rock-chips.com>
Subject: Re: [PATCH 10/12] drm: bridge/dw_hdmi: fix phy enable/disable handling
Date: Wed, 07 Oct 2015 12:05:37 +0800 [thread overview]
Message-ID: <56149A11.4070102@rock-chips.com> (raw)
In-Reply-To: <E1ZO6bT-0002vk-3d@rmk-PC.arm.linux.org.uk>
[-- Attachment #1.1: Type: text/plain, Size: 3783 bytes --]
On 08/09/2015 12:04 AM, Russell King wrote:
> The dw_hdmi enable/disable handling is particularly weak in several
> regards:
> * The hotplug interrupt could call hdmi_poweron() or hdmi_poweroff()
> while DRM is setting a mode, which could race with a mode being set.
> * Hotplug will always re-enable the phy whenever it detects an active
> hotplug signal, even if DRM has disabled the output.
>
> Resolve all of these by introducing a mutex to prevent races, and a
> state-tracking bool so we know whether DRM wishes the output to be
> enabled. We choose to use our own mutex rather than ->struct_mutex
> so that we can still process interrupts in a timely fashion.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> ---
> drivers/gpu/drm/bridge/dw_hdmi.c | 29 ++++++++++++++++++++++-------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
> index 7b8a4e942a71..0ee188930d26 100644
> --- a/drivers/gpu/drm/bridge/dw_hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw_hdmi.c
> @@ -125,6 +125,9 @@ struct dw_hdmi {
> bool sink_is_hdmi;
> bool sink_has_audio;
>
> + struct mutex mutex; /* for state below and previous_mode */
> + bool disabled; /* DRM has disabled our bridge */
> +
> spinlock_t audio_lock;
> struct mutex audio_mutex;
> unsigned int sample_rate;
> @@ -1389,8 +1392,12 @@ static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
> {
> struct dw_hdmi *hdmi = bridge->driver_private;
>
> + mutex_lock(&hdmi->mutex);
> +
> /* Store the display mode for plugin/DKMS poweron events */
> memcpy(&hdmi->previous_mode, mode, sizeof(hdmi->previous_mode));
> +
> + mutex_unlock(&hdmi->mutex);
> }
>
> static bool dw_hdmi_bridge_mode_fixup(struct drm_bridge *bridge,
> @@ -1404,14 +1411,20 @@ static void dw_hdmi_bridge_disable(struct drm_bridge *bridge)
> {
> struct dw_hdmi *hdmi = bridge->driver_private;
>
> + mutex_lock(&hdmi->mutex);
> + hdmi->disabled = true;
> dw_hdmi_poweroff(hdmi);
> + mutex_unlock(&hdmi->mutex);
> }
>
> static void dw_hdmi_bridge_enable(struct drm_bridge *bridge)
> {
> struct dw_hdmi *hdmi = bridge->driver_private;
>
> + mutex_lock(&hdmi->mutex);
> dw_hdmi_poweron(hdmi);
> + hdmi->disabled = false;
> + mutex_unlock(&hdmi->mutex);
> }
>
> static void dw_hdmi_bridge_nop(struct drm_bridge *bridge)
> @@ -1534,20 +1547,20 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
> phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
>
> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
> + hdmi_modb(hdmi, ~phy_int_pol, HDMI_PHY_HPD, HDMI_PHY_POL0);
> + mutex_lock(&hdmi->mutex);
> if (phy_int_pol & HDMI_PHY_HPD) {
> dev_dbg(hdmi->dev, "EVENT=plugin\n");
>
> - hdmi_modb(hdmi, 0, HDMI_PHY_HPD, HDMI_PHY_POL0);
> -
> - dw_hdmi_poweron(hdmi);
> + if (!hdmi->disabled)
> + dw_hdmi_poweron(hdmi);
> } else {
> dev_dbg(hdmi->dev, "EVENT=plugout\n");
>
> - hdmi_modb(hdmi, HDMI_PHY_HPD, HDMI_PHY_HPD,
> - HDMI_PHY_POL0);
> -
> - dw_hdmi_poweroff(hdmi);
> + if (!hdmi->disabled)
> + dw_hdmi_poweroff(hdmi);
Just like my reply on 08/12, I thought this could be removed, so
poweron/poweroff
would only be called with bridge->enable/bridge->disable, them maybe no need
mutex here.
Best regards,
- Yakir
> }
> + mutex_unlock(&hdmi->mutex);
> drm_helper_hpd_irq_event(hdmi->bridge->dev);
> }
>
> @@ -1617,7 +1630,9 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
> hdmi->sample_rate = 48000;
> hdmi->ratio = 100;
> hdmi->encoder = encoder;
> + hdmi->disabled = true;
>
> + mutex_init(&hdmi->mutex);
> mutex_init(&hdmi->audio_mutex);
> spin_lock_init(&hdmi->audio_lock);
>
[-- Attachment #1.2: Type: text/html, Size: 4397 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-10-07 4:05 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-08 16:02 [PATCH 00/12] dw-hdmi development Russell King - ARM Linux
2015-08-08 16:03 ` [PATCH 01/12] drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs Russell King
2015-08-08 16:03 ` [PATCH 02/12] drm: bridge/dw_hdmi: don't support any pixel doubled modes Russell King
2015-08-08 16:03 ` [PATCH 03/12] gpu: imx: simplify sync polarity setting Russell King
2015-10-06 17:57 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 04/12] gpu: imx: fix support for interlaced modes Russell King
[not found] ` <E1ZO6ay-0002qh-6E-eh5Bv4kxaXIANfyc6IWni62ZND6+EDdj@public.gmane.org>
2015-08-27 8:39 ` Philipp Zabel
2015-08-27 8:54 ` Russell King - ARM Linux
2015-08-27 9:40 ` Philipp Zabel
2015-10-06 17:59 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 05/12] drm: bridge/dw_hdmi: add support for interlaced video modes Russell King
2015-10-06 18:00 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling Russell King
2015-10-07 3:40 ` Yakir Yang
2015-08-08 16:03 ` [PATCH 07/12] drm: bridge/dw_hdmi: enable audio only if sink supports audio Russell King
2015-10-07 3:42 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 08/12] drm: bridge/dw_hdmi: avoid enabling interface in mode_set Russell King
2015-10-07 3:50 ` Yakir Yang
2015-10-07 9:18 ` Russell King - ARM Linux
2015-10-07 9:35 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 09/12] drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() Russell King
2015-10-07 4:00 ` Yakir Yang
[not found] ` <20150808160251.GM7557-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2015-08-08 16:04 ` [PATCH 10/12] drm: bridge/dw_hdmi: fix phy enable/disable handling Russell King
2015-10-07 4:05 ` Yakir Yang [this message]
2015-10-07 9:48 ` Russell King - ARM Linux
2015-10-07 10:40 ` Yakir Yang
2015-10-07 19:17 ` Russell King - ARM Linux
2015-10-08 8:35 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 11/12] drm: bridge/dw_hdmi: add connector mode forcing Russell King
2015-10-06 18:01 ` Fabio Estevam
2015-08-08 16:04 ` [PATCH 12/12] drm: bridge/dw_hdmi: improve HDMI enable/disable handling Russell King
2015-10-06 18:03 ` Fabio Estevam
2015-08-08 16:09 ` [PATCH 0/9] dw-hdmi audio support Russell King - ARM Linux
2015-08-08 16:10 ` [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-10 10:05 ` Takashi Iwai
2015-08-10 10:39 ` Russell King - ARM Linux
2015-08-10 12:23 ` Takashi Iwai
2015-08-10 16:49 ` Russell King - ARM Linux
2015-08-10 18:16 ` Mark Brown
2015-08-14 13:54 ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver David Airlie <airlied@linux.ie>, Sascha Hauer <s.hauer@pengutronix.de>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Jaroslav Kysela <perex@perex.cz>, linux-rockchip@lists.infradead.org, Mark Brown <broonie@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Yakir Yang <ykk@rock-chips.com>, Andy Yan <andy.yan@rock-chips.com>, Jon Nettleton <jon.nettleton@gmail.com>, linux-arm-kernel@lists.infradead.org Russell King
2015-08-14 14:04 ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-14 14:34 ` [alsa-devel] " Takashi Iwai
2015-10-06 18:07 ` [PATCH " Fabio Estevam
2015-10-06 18:18 ` Russell King - ARM Linux
2015-10-06 18:45 ` Fabio Estevam
2015-10-06 18:54 ` Russell King - ARM Linux
2015-10-06 20:25 ` Fabio Estevam
2015-10-09 16:00 ` Russell King - ARM Linux
2015-10-09 16:02 ` Fabio Estevam
2015-10-09 16:11 ` Russell King - ARM Linux
2015-08-08 16:10 ` [PATCH 2/9] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King
2015-08-08 16:10 ` [PATCH 3/9] drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio Russell King
2015-08-08 16:10 ` [PATCH 4/9] drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes Russell King
2015-08-08 16:10 ` [PATCH 5/9] drm: bridge/dw_hdmi: avoid being recursive in N calculation Russell King
2015-09-04 17:50 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 6/9] drm: bridge/dw_hdmi: adjust pixel clock values " Russell King
2015-09-04 18:21 ` Doug Anderson
2015-09-04 19:48 ` Doug Anderson
2015-09-04 21:24 ` Russell King - ARM Linux
2015-09-04 23:50 ` Doug Anderson
2015-09-05 0:27 ` Russell King - ARM Linux
2015-09-05 2:03 ` Doug Anderson
2015-09-05 8:31 ` Russell King - ARM Linux
2015-09-05 13:46 ` Doug Anderson
2015-09-05 14:01 ` Russell King - ARM Linux
2015-09-05 19:44 ` Doug Anderson
2015-09-05 8:34 ` Russell King - ARM Linux
2015-09-05 13:50 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code Russell King
2015-09-04 18:24 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 8/9] drm: bridge/dw_hdmi: replace CTS calculation for the ACR Russell King
2015-09-04 20:00 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Russell King
2015-08-10 15:48 ` Russell King - ARM Linux
2015-08-10 16:26 ` Yakir Yang
2015-08-27 8:42 ` [PATCH 0/9] dw-hdmi audio support Philipp Zabel
2016-01-05 15:40 ` [alsa-devel] " Jean-Michel Hautbois
2016-01-05 15:54 ` Fabio Estevam
2016-01-05 16:04 ` Russell King - ARM Linux
2016-01-07 8:21 ` Jean-Michel Hautbois
2015-08-10 12:21 ` [PATCH 00/12] dw-hdmi development Thierry Reding
2015-08-18 10:37 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56149A11.4070102@rock-chips.com \
--to=ykk@rock-chips.com \
--cc=andy.yan@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rmk+kernel@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).