Re: [PATCH] mmc: core: add auto bkops support

[Jaehoon Chung <jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>]

On 06/20/2016 10:33 PM, Alex Lemberg wrote:
> Hi Shawn,
> 
> […]
> 
>>>> +
>>>> +static int mmc_stop_auto_bkops(struct mmc_card *card)
>>>> +{
>>>> +	int err = 0;
>>>> +
>>>> +	if (!card->ext_csd.auto_bkops_en)
>>>> +		return 0;
>>>> +
>>>
>>> Shouldn’t the BKOPS_STATUS be checked prior to disabling the BKOPS activity of the device?
>>>
>>
>> Hrmm.. I read the whole section of spec for it, and I did find this
>> requirement for manul bkops but not for the auto one. So what should we
>> do if using the auto one?
>>
> 
> In case of AUTO BKOPS, the eMMC Device should perform internal GC 
> in the same way as in case of MANUAL BKOPS.
> The only difference is a host awareness. 
> Although there is no requirement in the spec, I think the driver can
> give some time to the device to perform/complete its internal GC during the idle time.
> Thus I think we can check the BKOPS_STATUS on Runtime suspend.

I'm not sure we can check BKOPS_STATUS when use the AUTO_BKOPS.
I have also read the SPEC, but it's not clearly for checking the BKOPS_STATUS.
Just i understood that it should be operated without a host's awareness.

Best Regards,
Jaehoon Chung

> 
> […]
> 
> Thanks,
> Alex
> 


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip