Re: [RFC PATCH] PCI: rockchip: fix system hang up if activate CONFIG_DEBUG_SHIRQ

[jeffy <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>]

Hi shawn,

On 08/10/2017 04:21 PM, Shawn Lin wrote:
> With CONFIG_DEBUG_SHIRQ enabled, the irq tear down routine
> would still access the irq handler registed as a shard irq.
> Per the comment within the function of __free_irq, it says
> "It's a shared IRQ -- the driver ought to be prepared for
> an IRQ event to happen even now it's being freed". However
> when failing to probe the driver, it may disable the clock
> for accessing the register and the following check for shared
> irq state would call the irq handler which accesses the register
> w/o the clk enabled. That will hang the system forever.

i think this extra irq call is to make sure it's safe to get a shared 
irq when we are freeing it, and we would not get this irq after freed it.

so maybe just call devm_free_irq before disable clks(and other required 
resources for the irq handler)? and also do it in the rockchip_pcie_remove.