Re: [PATCH v5 08/12] phy: rockchip: samsung-hdptx: Setup TMDS char rate via phy_configure_opts_hdmi

[Cristian Ciocaltea <cristian.ciocaltea@collabora.com>]

On 3/9/25 12:15 PM, Cristian Ciocaltea wrote:
> On 3/9/25 11:26 AM, Dmitry Baryshkov wrote:
>> On Sat, 8 Mar 2025 at 14:21, Cristian Ciocaltea
>> <cristian.ciocaltea@collabora.com> wrote:
>>>
>>> The current workaround to setup the TMDS character rate relies on the
>>> unconventional usage of phy_set_bus_width().
>>>
>>> Make use of the recently introduced HDMI PHY configuration API to
>>> properly handle the setup.  The workaround will be dropped as soon as
>>> the switch has been completed on both ends.
>>>
>>> Rename rk_hdptx_phy_verify_config() to rk_hdptx_phy_verify_dp_config()
>>> and introduce the rk_hdptx_phy_verify_hdmi_config() helper to check the
>>> HDMI parameters during phy_configure().
>>>
>>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>>> ---
>>>  drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 64 +++++++++++++++++------
>>>  1 file changed, 47 insertions(+), 17 deletions(-)
>>>
>>
>>> @@ -1469,8 +1474,27 @@ static int rk_hdptx_phy_power_off(struct phy *phy)
>>>         return rk_hdptx_phy_consumer_put(hdptx, false);
>>>  }
>>>
>>> -static int rk_hdptx_phy_verify_config(struct rk_hdptx_phy *hdptx,
>>> -                                     struct phy_configure_opts_dp *dp)
>>> +static int rk_hdptx_phy_verify_hdmi_config(struct rk_hdptx_phy *hdptx,
>>> +                                          struct phy_configure_opts_hdmi *hdmi)
>>> +{
>>> +       int i;
>>> +
>>> +       if (!hdmi->tmds_char_rate || hdmi->tmds_char_rate > HDMI20_MAX_RATE)
>>> +               return -EINVAL;
>>> +
>>> +       for (i = 0; i < ARRAY_SIZE(ropll_tmds_cfg); i++)
>>> +               if (hdmi->tmds_char_rate == ropll_tmds_cfg[i].rate)
>>> +                       break;
>>
>> return 0;
>>
>>> +
>>> +       if (i == ARRAY_SIZE(ropll_tmds_cfg) &&
>>
>> Then you can drop the first clause in the if
> 
> Sure, will do!

I actually ended up submitting v6 [1] without these changes, since the last
patch "phy: rockchip: samsung-hdptx: Add high color depth management" would
need to revert them, i.e. it extends the verification and cannot really do
"return 0;" early.

[1] https://lore.kernel.org/lkml/20250318-phy-sam-hdptx-bpc-v6-0-8cb1678e7663@collabora.com/

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip