From: Markus Reichl <m.reichl@fivetechno.de>
To: Anand Moon <linux.amoon@gmail.com>, Soeren Moch <smoch@web.de>
Cc: linux-rockchip@lists.infradead.org,
Lee Jones <lee.jones@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mfd: rk808: Always use poweroff when requested
Date: Tue, 10 Dec 2019 13:55:37 +0100 [thread overview]
Message-ID: <6e380c0a-007d-22db-af26-19defaf1ae83@fivetechno.de> (raw)
In-Reply-To: <CANAwSgS9ixhyOE2QYQ3CetA=BUVebMan2=9xBKF=U3YXAwCHNQ@mail.gmail.com>
Hi Anand,
Am 10.12.19 um 13:42 schrieb Anand Moon:
> Hi Soeren,
>
> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote:
>>
>> With the device tree property "rockchip,system-power-controller" we
>> explicitly request to use this PMIC to power off the system. So always
>> register our poweroff function, even if some other handler (probably
>> PSCI poweroff) was registered before.
>>
>> Signed-off-by: Soeren Moch <smoch@web.de>
>> ---
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: Heiko Stuebner <heiko@sntech.de>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: linux-rockchip@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> drivers/mfd/rk808.c | 11 ++---------
>> 1 file changed, 2 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
>> index a69a6742ecdc..616e44e7ef98 100644
>> --- a/drivers/mfd/rk808.c
>> +++ b/drivers/mfd/rk808.c
>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client,
>> const struct mfd_cell *cells;
>> int nr_pre_init_regs;
>> int nr_cells;
>> - int pm_off = 0, msb, lsb;
>> + int msb, lsb;
>> unsigned char pmic_id_msb, pmic_id_lsb;
>> int ret;
>> int i;
>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client,
>> goto err_irq;
>> }
>>
>> - pm_off = of_property_read_bool(np,
>> - "rockchip,system-power-controller");
>> - if (pm_off && !pm_power_off) {
>> + if (of_property_read_bool(np, "rockchip,system-power-controller")) {
>> rk808_i2c_client = client;
>> pm_power_off = rk808->pm_pwroff_fn;
>> - }
>> -
>> - if (pm_off && !pm_power_off_prepare) {
>> - if (!rk808_i2c_client)
>> - rk808_i2c_client = client;
>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
>> }
>>
>
> I gave this a try on my Rock960 and Odroid N1
> both got kernel panic below.
I see the same on rk3399-roc-pc.
>
> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered
> [ 58.306747] reboot: Power down
> [ 58.307106] ------------[ cut here ]------------
> [ 58.307510] No atomic I2C transfer handler for 'i2c-0'
> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41
> i2c_transfer+0xe4/0xf8
> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio
> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi
> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm
> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s
> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie
> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal
> ip_tables x_tables ipv6 nf_defrag_ipv6
> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted 5.5.0-rc1-dirty #1
> [ 58.312725] Hardware name: 96boards Rock960 (DT)
> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO)
> [ 58.313551] pc : i2c_transfer+0xe4/0xf8
> [ 58.313889] lr : i2c_transfer+0xe4/0xf8
> [ 58.314225] sp : ffff80001004bb00
> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000
> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000
> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008
> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74
> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58
> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010
> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019
> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8
> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f
> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0
> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8
> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9
> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000
> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8
> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000
> [ 58.321491] Call trace:
> [ 58.321710] i2c_transfer+0xe4/0xf8
> [ 58.322020] regmap_i2c_read+0x5c/0x98
> [ 58.322350] _regmap_raw_read+0xcc/0x138
> [ 58.322694] _regmap_bus_read+0x3c/0x70
> [ 58.323034] _regmap_read+0x60/0xe0
> [ 58.323341] _regmap_update_bits+0xc8/0x108
> [ 58.323707] regmap_update_bits_base+0x60/0x90
> [ 58.324099] rk808_device_shutdown+0x38/0x50
> [ 58.324476] machine_power_off+0x24/0x30
> [ 58.324823] kernel_power_off+0x64/0x70
> [ 58.325159] __do_sys_reboot+0x15c/0x240
> [ 58.325504] __arm64_sys_reboot+0x20/0x28
> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150
> [ 58.326279] el0_svc_handler+0x20/0x80
> [ 58.326607] el0_sync_handler+0x118/0x188
> [ 58.326960] el0_sync+0x140/0x180
> [ 58.327251] ---[ end trace b1de39d03d724d01 ]---
>
> -Anand
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
Gruß,
--
Markus Reichl
next prev parent reply other threads:[~2019-12-10 12:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 11:57 [PATCH] mfd: rk808: Always use poweroff when requested Soeren Moch
2019-12-09 12:32 ` Heiko Stübner
2019-12-09 13:43 ` Robin Murphy
2019-12-10 12:42 ` Anand Moon
2019-12-10 12:55 ` Markus Reichl [this message]
2019-12-10 16:40 ` Soeren Moch
2019-12-11 2:00 ` Anand Moon
2019-12-11 10:55 ` Soeren Moch
2019-12-12 0:28 ` Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6e380c0a-007d-22db-af26-19defaf1ae83@fivetechno.de \
--to=m.reichl@fivetechno.de \
--cc=heiko@sntech.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux.amoon@gmail.com \
--cc=smoch@web.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox