Re: [PATCH v3 3/6] phy: rockchip-typec: enable usb3 host during usb3 phy power on

Heiko Stuebner
2018-02-17T00:08:07Z

Am Freitag, 16. Februar 2018, 13:09:53 CET schrieb Enric Balletbo i Serra:
> From: William wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> We have forced usb3 to work in usb2 only mode in firmware by setting
> usb3tousb2_en (bit3 of GRF_USB3PHY0/1_CON0) to 1, and setting
> host_u3_port_disable (bit0 of GRF_USB3OTG0/1_CON1) to 1 and host_u3_port
> (bit15~12 of GRF_USB3OTG0/1_CON1) to 0. So we need to re-enable usb3
> host.
>
> Note that the RK3399 TRM suggests that we should keep the whole usb3
> controller in reset for the duration of the Type-C PHY initialization.
> However, it's hard to assert the reset in the current framework of
> reset. And according to the TRM, it doesn't require that we should
> clear the usb3tousb2 bit before pipe ready. So let's enable the usb3
> host after pipe ready to avoid the Type-C PHY initialization failure.
>
> Signed-off-by: William wu <wulf-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

Reviewed-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html