From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org
Cc: Dafna Hirschfeld <dafna@fastmail.com>,
Paul Elder <paul.elder@ideasonboard.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
linux-rockchip@lists.infradead.org
Subject: Re: [PATCH] media: rkisp1: resizer: Stop manual allocation of v4l2_subdev_state
Date: Tue, 5 Dec 2023 11:32:34 +0200 [thread overview]
Message-ID: <88681389-6969-4ac0-93f8-a3fe1ae1a1fc@ideasonboard.com> (raw)
In-Reply-To: <20231126020948.2700-1-laurent.pinchart@ideasonboard.com>
On 26/11/2023 04:09, Laurent Pinchart wrote:
> Supported media bus codes on the resizer sink pad are identical to the
> ISP source pad. The .enum_mbus_code() handler thus delegates the
> enumeration to the ISP's operation. This is problematic for two
> reasons:
>
> - Format enumeration on the ISP source pad is dependent on the format
> configured on the ISP sink pad for the same subdev state (TRY or
> ACTIVE), while format enumeration on the resizer sink pad should
> return all formats supported by the resizer subdev, regardless of the
> ISP configuration.
>
> - Delegating the operation involves creating a fake v4l2_subdev_state on
> the stack to pass to the ISP .enum_mbus_code() handler. This gets in
> the way of evolution of both the ISP enumeration handler and, more
> generally, the V4L2 subdev state infrastructure.
>
> Fix those two issues by implementing format enumeration manually for the
> resizer.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Paul, Kieran, would you be able to test this for regressions ?
> ---
> .../platform/rockchip/rkisp1/rkisp1-resizer.c | 38 ++++++++++++-------
> 1 file changed, 24 insertions(+), 14 deletions(-)
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
I tested on my i.MX8MP board, although my kernel branch has quite a bit
of non-upstream patches to get everything working. But I don't think
those affect this patch.
Tomi
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
> index f7af360dcb28..a8e377701302 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-resizer.c
> @@ -330,12 +330,8 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
> {
> struct rkisp1_resizer *rsz =
> container_of(sd, struct rkisp1_resizer, sd);
> - struct v4l2_subdev_pad_config dummy_cfg;
> - struct v4l2_subdev_state pad_state = {
> - .pads = &dummy_cfg
> - };
> - u32 pad = code->pad;
> - int ret;
> + unsigned int index = code->index;
> + unsigned int i;
>
> if (code->pad == RKISP1_RSZ_PAD_SRC) {
> /* supported mbus codes on the src are the same as in the capture */
> @@ -355,15 +351,29 @@ static int rkisp1_rsz_enum_mbus_code(struct v4l2_subdev *sd,
> return 0;
> }
>
> - /* supported mbus codes on the sink pad are the same as isp src pad */
> - code->pad = RKISP1_ISP_PAD_SOURCE_VIDEO;
> - ret = v4l2_subdev_call(&rsz->rkisp1->isp.sd, pad, enum_mbus_code,
> - &pad_state, code);
> + /*
> + * Supported mbus codes on the sink pad are the same as on the ISP
> + * source pad.
> + */
> + for (i = 0; ; i++) {
> + const struct rkisp1_mbus_info *fmt =
> + rkisp1_mbus_info_get_by_index(i);
>
> - /* restore pad */
> - code->pad = pad;
> - code->flags = 0;
> - return ret;
> + if (!fmt)
> + break;
> +
> + if (!(fmt->direction & RKISP1_ISP_SD_SRC))
> + continue;
> +
> + if (!index) {
> + code->code = fmt->mbus_code;
> + return 0;
> + }
> +
> + index--;
> + }
> +
> + return -EINVAL;
> }
>
> static int rkisp1_rsz_init_state(struct v4l2_subdev *sd,
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2023-12-05 9:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-26 2:09 [PATCH] media: rkisp1: resizer: Stop manual allocation of v4l2_subdev_state Laurent Pinchart
2023-12-05 9:32 ` Tomi Valkeinen [this message]
2023-12-05 9:57 ` Paul Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=88681389-6969-4ac0-93f8-a3fe1ae1a1fc@ideasonboard.com \
--to=tomi.valkeinen@ideasonboard.com \
--cc=dafna@fastmail.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=paul.elder@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox