messages from 2026-07-18 03:13:34 to 2026-07-19 18:49:44 UTC [more...]
[PATCH] arm64: dts: rockchip: fix label of sys_led for nanopi-r4s
2026-07-19 18:49 UTC (2+ messages)
` [PATCH v2] "
[PATCH net-next] net: phy: motorcomm: enable the reference clock for YT8531
2026-07-19 15:34 UTC (2+ messages)
[PATCH v3 0/4] media: synopsys: hdmirx: add HDMI audio capture support
2026-07-19 9:53 UTC (12+ messages)
` [PATCH v3 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells
` [PATCH v3 2/4] media: synopsys: hdmirx: add HDMI audio capture support
` [PATCH v3 3/4] arm64: dts: rockchip: add #sound-dai-cells to the RK3588 HDMI receiver
` [PATCH v3 4/4] arm64: dts: rockchip: enable HDMI RX audio capture on Orange Pi 5 Plus
[PATCH net-next v2 2/2] net: stmmac: dwmac-rk: enable the reference clock for output mode
2026-07-19 3:46 UTC (2+ messages)
[PATCH v5 0/2] arm64: dts: rockchip: Add ArmSoM CM5 and CM5-IO
2026-07-19 3:46 UTC (3+ messages)
` [PATCH v5 1/2] dt-bindings: arm: "
` [PATCH v5 2/2] arm64: dts: "
[PATCH v16 00/10] Add Invensense ICM42607
2026-07-18 23:19 UTC (7+ messages)
` [PATCH v16 02/10] dt-bindings: iio: imu: icm42600: Remove interrupts from required
[PATCH V17 0/9] Add Invensense ICM42607
2026-07-18 23:13 UTC (6+ messages)
` [PATCH V17 3/9] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver
` [PATCH V17 8/9] iio: imu: inv_icm42607: Add Temp Support in icm42607
[PATCH v2 0/2] Add support for Vicharak Vaaman board
2026-07-18 20:58 UTC (5+ messages)
` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add "
` [PATCH v2 2/2] arm64: dts: "
[RFC PATCH v2 0/8] accel/rocket: RK3576 NPU (RKNN) enablement
2026-07-18 7:49 UTC (4+ messages)
` [RFC PATCH v2 1/8] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core
` [RFC PATCH v2 8/8] arm64: dts: rockchip: rk3576-rock-4d: enable NPU
[RFC PATCH 4/9] iommu/rockchip: skip orphaned-fault banks in rk_iommu_is_stall_active
2026-07-18 3:13 UTC (2+ messages)
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox