From: "Diederik de Haas" <diederik@cknow-tech.com>
To: "Detlev Casanova" <detlev.casanova@collabora.com>,
"Andrzej Hajda" <andrzej.hajda@intel.com>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Robert Foss" <rfoss@kernel.org>,
"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
"Jonas Karlman" <jonas@kwiboo.se>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>
Cc: <dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
<kernel@collabora.com>, <linux-rockchip@lists.infradead.org>
Subject: Re: [PATCH] drm/bridge: dw-hdmi-qp: Return -EOPNOTSUPP in HDMI audio functions
Date: Sat, 08 Aug 2026 13:28:11 +0200 [thread overview]
Message-ID: <DKJIZ53ZYJ91.3KMAO0TX8X9XS@cknow-tech.com> (raw)
In-Reply-To: <20260519-fix-hdmi-audio-warnings-v1-1-9608966c993f@collabora.com>
Hi Detlev,
On Tue May 19, 2026 at 8:00 PM CEST, Detlev Casanova wrote:
> -EOPNOTSUPP is not logged as an error by the ASoC subsystem, but -ENODEV
> is.
> It also better represents the situation: The operation is currently not
> supported (because clocks are not enabled and tmds_char_rate is
> unavailable), but the hardware is present.
>
> Using -EOPNOTSUPP in the audio_prepare callback removes possible repeated
> warning log lines when HDMI is not connected.
IME/IMO that's a bit of an understatement as I got 10/100/1000s of these:
hdmi-audio-codec hdmi-audio-codec.6.auto: ASoC error (-19): at snd_soc_dai_prepare() on i2s-hifi
In my test without this patch, I booted up my SBCs, logged in quickly and
still got 60/120/270 of these errors in dmesg ... and I wasn't actually
using HDMI at that time. Previously, more then once did it completely
fill the dmesg buffer, removing/hiding the things I actually wanted to see.
> Returning -EOPNOTSUPP in the audio_enable callback is also needed as it
> avoids logging 0-valued ELD errors.
I've seen those too, multiple times, although it didn't annoy me as much
as the above one ... due to the (much) lower frequency. So
1) Thanks a LOT for this patch :-D
2) Feel free to include my
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # Rock 5B, NanoPC-T6 LTS & Plus
Cheers,
Diederik
> When tmds_char_rate is available, the clocks are enabled and the
> functions will keep returning 0 as before.
>
> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
> index d649a1cf07f5..270c8c47d853 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c
> @@ -469,8 +469,10 @@ static int dw_hdmi_qp_audio_enable(struct drm_bridge *bridge,
> {
> struct dw_hdmi_qp *hdmi = dw_hdmi_qp_from_bridge(bridge);
>
> - if (hdmi->tmds_char_rate)
> - dw_hdmi_qp_mod(hdmi, 0, AVP_DATAPATH_PACKET_AUDIO_SWDISABLE, GLOBAL_SWDISABLE);
> + if (!hdmi->tmds_char_rate)
> + return -EOPNOTSUPP;
> +
> + dw_hdmi_qp_mod(hdmi, 0, AVP_DATAPATH_PACKET_AUDIO_SWDISABLE, GLOBAL_SWDISABLE);
>
> return 0;
> }
> @@ -484,7 +486,7 @@ static int dw_hdmi_qp_audio_prepare(struct drm_bridge *bridge,
> bool ref2stream = false;
>
> if (!hdmi->tmds_char_rate)
> - return -ENODEV;
> + return -EOPNOTSUPP;
>
> if (fmt->bit_clk_provider | fmt->frame_clk_provider) {
> dev_err(hdmi->dev, "unsupported clock settings\n");
>
> ---
> base-commit: 1a2ab0feaa23147e347b4d4cb79cb3fc392118eb
> change-id: 20260519-fix-hdmi-audio-warnings-139062ec00b9
>
> Best regards,
> --
> Detlev Casanova <detlev.casanova@collabora.com>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
parent reply other threads:[~2026-08-08 11:28 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20260519-fix-hdmi-audio-warnings-v1-1-9608966c993f@collabora.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DKJIZ53ZYJ91.3KMAO0TX8X9XS@cknow-tech.com \
--to=diederik@cknow-tech.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=detlev.casanova@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox