[PATCH v1] phy: rockchip-inno-usb2: Prevent incorrect error on probe

Peter Geis
2022-06-25T21:27:40Z

If a phy supply is designated but isn't available at probe time, an
EPROBE_DEFER is returned. Use dev_err_probe to prevent this from
incorrectly printing during boot.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 6e44069617df..706a2263b0b2 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1289,7 +1289,7 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)

phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
if (IS_ERR(phy)) {
- dev_err(dev, "failed to create phy\n");
+ dev_err_probe(dev, PTR_ERR(phy), "failed to create phy\n");
ret = PTR_ERR(phy);
goto put_child;
}
--
2.25.1

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org