Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Doug Brewer <brewer.doug@gmail.com>
To: linux-rockchip@lists.infradead.org
Subject: Problems about NIC, PCIe and usb on RK3568 EVB
Date: Thu, 13 Apr 2023 14:55:25 +0900	[thread overview]
Message-ID: <ZDeZTWWIW2I4H7Sc@www.com> (raw)

Hi,

I tested Linux kernel 6.3-rc6 on my rk3568 evaluation board, it seems there
are problems with Ethernet, PCIe and usb devices.

First, NICs doesn't work.

rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
rk_gmac-dwmac fe010000.ethernet: no regulator found
rk_gmac-dwmac fe010000.ethernet: clock input or output? (output).
rk_gmac-dwmac fe010000.ethernet: Can not read property: tx_delay.
rk_gmac-dwmac fe010000.ethernet: set tx_delay to 0x30
rk_gmac-dwmac fe010000.ethernet: Can not read property: rx_delay.
rk_gmac-dwmac fe010000.ethernet: set rx_delay to 0x10
rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
rk_gmac-dwmac fe010000.ethernet: init for RGMII_ID
rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
rk_gmac-dwmac fe010000.ethernet:         DWMAC4/5
rk_gmac-dwmac fe010000.ethernet: DMA HW capability register suppd
rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine suppd
rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
rk_gmac-dwmac fe010000.ethernet: TSO supported
rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watr
rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/devich
mdio_bus stmmac-1: MDIO device at address 0 is missing.
rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found 
rk_gmac-dwmac fe2a0000.ethernet: no regulator found
rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (output).
rk_gmac-dwmac fe2a0000.ethernet: Can not read property: tx_delay.
rk_gmac-dwmac fe2a0000.ethernet: set tx_delay to 0x30
rk_gmac-dwmac fe2a0000.ethernet: Can not read property: rx_delay.
rk_gmac-dwmac fe2a0000.ethernet: set rx_delay to 0x10
rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no).
rk_gmac-dwmac fe2a0000.ethernet: init for RGMII_ID
rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
rk_gmac-dwmac fe2a0000.ethernet:         DWMAC4/5
rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register suppd
rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine suppd
rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported
rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported
rk_gmac-dwmac fe2a0000.ethernet: TSO supported
rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watr
rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=10)
rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled
rk_gmac-dwmac fe2a0000.ethernet: Using 32/32 bits DMA host/devich
mdio_bus stmmac-0: MDIO device at address 0 is missing.
rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POO0
rk_gmac-dwmac fe010000.ethernet eth0: __stmmac_open: Cannot atta)

Second, running 'lspci' and 'lsusb' doesn't see any devices on PCIe and USB.
I guess the device tree might be updated.  Anyone has idea how to fix it?
Thanks.

- Doug

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

             reply	other threads:[~2023-04-13  6:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-13  5:55 Doug Brewer [this message]
2023-04-13  6:28 ` Problems about NIC, PCIe and usb on RK3568 EVB Johannes Zink
2023-04-13  8:02   ` Aw: " Frank Wunderlich
2023-04-13  9:21     ` Doug Brewer
2023-04-13  9:37       ` Aw: " Frank Wunderlich
2023-04-14  2:39         ` Doug Brewer
2023-04-18  9:26           ` Michael Riesch
2023-04-19  5:47             ` Doug Brewer
2023-04-19 10:18               ` Michael Riesch
2023-04-20  0:50                 ` Doug Brewer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZDeZTWWIW2I4H7Sc@www.com \
    --to=brewer.doug@gmail.com \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox