[PATCH v2 1/4] dt-bindings: display: panel: Add BOE TH101MB31IG002-28A panel

Manuel Traut
2023-12-23T15:20:54Z

Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is
used e.g. in the Pine64 Pinetab2 and PinetabV.

Signed-off-by: Manuel Traut <manut@mecka.net>
---
.../display/panel/boe,th101mb31ig002-28a.yaml | 58 ++++++++++++++++++++++
1 file changed, 58 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 000000000000..32df26cbfeed
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+ - Manuel Traut <manut@mecka.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+ - boe,th101mb31ig002-28a
+
+ reg: true
+ backlight: true
+ enable-gpios: true
+ power-supply: true
+ port: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,th101mb31ig002-28a";
+ reg = <0>;
+ backlight = <&backlight_lcd0>;
+ enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ rotation = <90>;
+ power-supply = <&vcc_3v3>;
+ port {
+ panel_in_dsi: endpoint {
+ remote-endpoint = <&dsi_out_con>;
+ };
+ };
+ };
+ };
+
+...

--
2.43.0