From: Niklas Cassel <cassel@kernel.org>
To: "Jingoo Han" <jingoohan1@gmail.com>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Heiko Stuebner" <heiko@sntech.de>
Cc: Shawn Lin <shawn.lin@rock-chips.com>,
FUKAUMI Naoki <naoki@radxa.com>,
Krishna chaitanya chundru <quic_krichai@quicinc.com>,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 0/6] PCI: dwc: Revert Link Up IRQ support
Date: Mon, 24 Nov 2025 10:50:29 +0100 [thread overview]
Message-ID: <aSQqZcW39Ze1IE74@ryzen> (raw)
In-Reply-To: <20251111105100.869997-8-cassel@kernel.org>
On Tue, Nov 11, 2025 at 11:51:00AM +0100, Niklas Cassel wrote:
> Revert all patches related to pcie-designware Root Complex Link Up IRQ
> support.
>
> While this fake hotplugging was a nice idea, it has shown that this feature
> does not handle PCIe switches correctly:
> pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
> pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
> pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
> pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
> pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
> pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
> pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
> pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
> pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
> pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
> pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
> pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
> pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
>
> During the initial scan, PCI core doesn't see the switch and since the Root
> Port is not hot plug capable, the secondary bus number gets assigned as the
> subordinate bus number. This means, the PCI core assumes that only one bus
> will appear behind the Root Port since the Root Port is not hot plug
> capable.
>
> This works perfectly fine for PCIe endpoints connected to the Root Port,
> since they don't extend the bus. However, if a PCIe switch is connected,
> then there is a problem when the downstream busses starts showing up and
> the PCI core doesn't extend the subordinate bus number after initial scan
> during boot.
>
> The long term plan is to migrate this driver to the pwrctrl framework,
> once it adds proper support for powering up and enumerating PCIe switches.
Hello PCI maintainers,
Merge window is opening soon,
what is the status of this series?
Kind regards,
Niklas
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-11-24 9:50 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-11 10:51 [PATCH 0/6] PCI: dwc: Revert Link Up IRQ support Niklas Cassel
2025-11-11 10:51 ` [PATCH 1/6] Revert "PCI: dw-rockchip: Don't wait for link since we can detect Link Up" Niklas Cassel
2025-11-11 10:51 ` [PATCH 2/6] Revert "PCI: dw-rockchip: Enumerate endpoints based on dll_link_up IRQ" Niklas Cassel
[not found] ` <aRMZS3EUYx189Xup@wunner.de>
2025-11-11 12:39 ` [PATCH 0/6] PCI: dwc: Revert Link Up IRQ support Niklas Cassel
2025-11-11 14:00 ` Manivannan Sadhasivam
2025-11-11 13:33 ` Shawn Lin
2025-11-24 9:50 ` Niklas Cassel [this message]
2025-11-24 12:37 ` Manivannan Sadhasivam
2025-11-24 14:02 ` Niklas Cassel
2025-11-26 13:30 ` FUKAUMI Naoki
2025-11-26 13:54 ` Manivannan Sadhasivam
2025-11-26 23:35 ` FUKAUMI Naoki
2025-11-27 7:34 ` FUKAUMI Naoki
2025-11-27 7:43 ` Niklas Cassel
2025-11-27 11:02 ` FUKAUMI Naoki
2025-11-28 5:15 ` FUKAUMI Naoki
2025-11-28 5:34 ` Niklas Cassel
2025-12-22 6:16 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aSQqZcW39Ze1IE74@ryzen \
--to=cassel@kernel.org \
--cc=bhelgaas@google.com \
--cc=heiko@sntech.de \
--cc=jingoohan1@gmail.com \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=naoki@radxa.com \
--cc=quic_krichai@quicinc.com \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).