Re: [REGRESSION][BISECTED] wifi broken on pinebook pro

[Jan Palus <jpalus@fastmail.com>]

On 29.12.2025 06:23, Peter Robinson wrote:
> On Wed, 17 Dec 2025 at 11:26, Jan Palus <jpalus@fastmail.com> wrote:
> >
> > WiFi no longer works on Pinebook Pro after upgrade to kernel 6.18. It
> > appears firmware fails to load:
> >
> > ...
> > mmc_host mmc0: card is non-removable.
> > mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
> > Bluetooth: hci0: BCM: features 0x0f
> > Bluetooth: hci0: BCM4345C5 Ampak_CL1 UART 37.4 MHz BT 5.0 [Version: Version: 0039.0089]
> > Bluetooth: hci0: BCM4345C5 (003.006.006) build 0089
> > mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
> > dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 55
> > mmc0: new UHS-I speed SDR104 SDIO card at address 0001
> > brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9
> > usbcore: registered new interface driver brcmfmac
> > brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.pine64,pinebook-pro.bin failed with error -2
> > brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
> > ieee80211 phy0: brcmf_bus_started: failed: -110
> > ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
> > brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
> >
> > compared to 6.17 instead of last 4 lines with errors there's single one
> > with info about loaded firmware:
> >
> > brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: May 14 2020 17:26:08 version 7.84.17.1 (r871554) FWID 01-3d9e1d87
> >
> > Bisected to:
> >
> > 6d54d935062e2d4a7d3f779ceb9eeff108d0535d is the first new commit
> > commit 6d54d935062e2d4a7d3f779ceb9eeff108d0535d (HEAD)
> > Author: Peter Robinson <pbrobinson@gmail.com>
> > Date:   Wed Aug 27 16:30:37 2025
> >
> >     arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro
> >
> >     Update the wake-up pin and associated interupt details for the
> >     Pinebook Pro WiFi module.
> >
> >     Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
> >     Link: https://lore.kernel.org/r/20250827143040.1644867-1-pbrobinson@gmail.com
> >     Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> >
> >  arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 18 ++++++++++++++++++
> >  1 file changed, 18 insertions(+)
> >
> >
> > With this commit reverted on top of 6.18.1 wireless connection works
> > fine.
> >
> > Not sure what could be relevant but:
> > - it's an early model, I think second batch, delivered end of 2019
> 
> Is it the Synoptics or the Cypress/Infineon module? What firmware are you using?

Judging by the fact acquisition by Synaptics happened sometime late
2020/early 2021 I guess it must be Cypress? I'm not really familiar with
BCM43456 chip history. Firmware files used are
brcm/brcmfmac43456-sdio.{bin,clm_blob,txt} exactly those found at:

https://github.com/RPi-Distro/firmware-nonfree/tree/trixie/debian/config/brcm80211/brcm

> 
> > - mainline uboot 2025.10 is used
> >
> >
> > #regzbot introduced: 6d54d93506

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip