public inbox for linux-rockchip@lists.infradead.org
 help / color / mirror / Atom feed
From: Umang Jain <umang.jain@ideasonboard.com>
To: "Adam Ford" <aford173@gmail.com>, "Ondřej Jirman" <megi@xff.cz>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	linux-kernel@vger.kernel.org,
	"Dafna Hirschfeld" <dafna@fastmail.com>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"open list:ROCKCHIP ISP V1 DRIVER" <linux-media@vger.kernel.org>,
	"open list:ROCKCHIP ISP V1 DRIVER"
	<linux-rockchip@lists.infradead.org>,
	"moderated list:ARM/Rockchip SoC support"
	<linux-arm-kernel@lists.infradead.org>,
	"Paul Elder" <paul.elder@ideasonboard.com>
Subject: Re: [PATCH] media: rkisp1: Allow higher input resolution
Date: Mon, 19 Feb 2024 14:33:21 +0530	[thread overview]
Message-ID: <b500676e-431f-40fc-868b-9f9bb359a109@ideasonboard.com> (raw)
In-Reply-To: <CAHCN7x+zi3WxnY-mxZFKePs1cS=-DprEmh_CnypJ4XK7xBzjMQ@mail.gmail.com>

Hi All,

On 19/02/24 7:39 am, Adam Ford wrote:
> On Sun, Feb 18, 2024 at 3:02 PM Ondřej Jirman <megi@xff.cz> wrote:
>> On Sun, Feb 18, 2024 at 10:59:08PM +0200, Laurent Pinchart wrote:
>>> Hi Ondrej,
>>>
>>> (CC'ing Paul and Umang)
>>>
>>> Thank you for the patch.
>>>
>>> On Sat, Feb 17, 2024 at 07:51:58PM +0100, Ondřej Jirman wrote:
>>>> From: Ondrej Jirman <megi@xff.cz>
>>>>
>>>> In BSP driver, it is allowed, and it works in practice. Tested on
>>>> Pinephone Pro/RK3399 with IMX258 at full res.
>>> Paul, Umang, do I recall correctly that you have a similar change ?
>>> Could you review and test this (especially on the i.MX8MP) ?
>> It's also a limit from the datasheet, so the change should not be that
>> controversial:
>>
>>    https://megous.com/dl/tmp/d2b333043ecebaf3.png
>>
>> (so that it doesn't sound like I just copied the BSP values)
>>
>  From what I see in the i.MX8M Plus reference manual, it has a max
> resolution of 4096x3072, so it might be necessary to move this off

This is what I (and I assume Paul too) have been working with on i.MX8M 
Plus. So it's the known and tested value of max ISP input from out side.
> from a #define into a structure that varies by product family.

Yeah!
>
> adam
>> regards,
>>          o.
>>
>>>> Signed-off-by: Ondrej Jirman <megi@xff.cz>
>>>> ---
>>>>   drivers/media/platform/rockchip/rkisp1/rkisp1-common.h | 4 ++--
>>>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
>>>> index 4b6b28c05b89..74098ddbeeb3 100644
>>>> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
>>>> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
>>>> @@ -33,8 +33,8 @@ struct dentry;
>>>>   #define RKISP1_ISP_SD_SINK                 BIT(1)
>>>>
>>>>   /* min and max values for the widths and heights of the entities */
>>>> -#define RKISP1_ISP_MAX_WIDTH                       4032
>>>> -#define RKISP1_ISP_MAX_HEIGHT                      3024
>>>> +#define RKISP1_ISP_MAX_WIDTH                       4416
>>>> +#define RKISP1_ISP_MAX_HEIGHT                      3312
>>>>   #define RKISP1_ISP_MIN_WIDTH                       32
>>>>   #define RKISP1_ISP_MIN_HEIGHT                      32
>>>>
>>> --
>>> Regards,
>>>
>>> Laurent Pinchart


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2024-02-19  9:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-17 18:51 [PATCH] media: rkisp1: Allow higher input resolution Ondřej Jirman
2024-02-18 20:59 ` Laurent Pinchart
2024-02-18 21:01   ` Ondřej Jirman
2024-02-19  2:09     ` Adam Ford
2024-02-19  9:03       ` Umang Jain [this message]
2024-02-19 10:11         ` Paul Elder
2024-02-19 11:54           ` Laurent Pinchart
2024-02-20 23:59             ` Ondřej Jirman
2024-02-20 23:56           ` Ondřej Jirman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b500676e-431f-40fc-868b-9f9bb359a109@ideasonboard.com \
    --to=umang.jain@ideasonboard.com \
    --cc=aford173@gmail.com \
    --cc=dafna@fastmail.com \
    --cc=heiko@sntech.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=megi@xff.cz \
    --cc=paul.elder@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox