[PATCH v3 2/7] i2c: designware: Optimize flag reading in i2c_dw_read()

["Benoît Monin" <benoit.monin@bootlin.com>]

Optimize the i2c_dw_read() function by reading the message flags only
once per message, rather than for every byte.

The message flags are accessed both in the outer loop and the inner loop,
so move the declaration of the local flags variable to the outer loop.

The message index is only modified by the outer loop, so reading the
flags in the inner loop was always getting the same value.

Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
 drivers/i2c/busses/i2c-designware-master.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 41e9b5ecad20..ec4fc2708d03 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -586,11 +586,12 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 	unsigned int rx_valid;
 
 	for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
+		u32 flags = msgs[dev->msg_read_idx].flags;
 		unsigned int tmp;
 		u32 len;
 		u8 *buf;
 
-		if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
+		if (!(flags & I2C_M_RD))
 			continue;
 
 		if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
@@ -604,8 +605,6 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 		regmap_read(dev->map, DW_IC_RXFLR, &rx_valid);
 
 		for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
-			u32 flags = msgs[dev->msg_read_idx].flags;
-
 			regmap_read(dev->map, DW_IC_DATA_CMD, &tmp);
 			tmp &= DW_IC_DATA_CMD_DAT;
 			/* Ensure length byte is a valid value */

-- 
2.51.1