[PATCH v3 5/7] i2c: designware: Add dedicated algorithm for AMD NAVI

["Benoît Monin" <benoit.monin@bootlin.com>]

Apart from runtime PM, there is nothing in common between i2c_dw_xfer()
and amd_i2c_dw_xfer_quirk(), so give AMD NAVI controller its own algorithm
instead of calling the quirk from i2c_dw_xfer().

Add runtime PM handling to amd_i2c_dw_xfer_quirk() and a dedicated
i2c_algorithm for AMD NAVI controllers. The adapter algorithm is set
during probe based on the device model.

This way we avoid checking for the device model at the start of every
transfer.

Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
 drivers/i2c/busses/i2c-designware-master.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index fe708c7cd282..12a1194bec52 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -354,6 +354,10 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
 	u8 *tx_buf;
 	unsigned int val;
 
+	ACQUIRE(pm_runtime_active_auto_try, pm)(dev->dev);
+	if (ACQUIRE_ERR(pm_runtime_active_auto_try, &pm))
+		return -ENXIO;
+
 	/*
 	 * In order to enable the interrupt for UCSI i.e. AMD NAVI GPU card,
 	 * it is mandatory to set the right value in specific register
@@ -815,13 +819,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	if (ACQUIRE_ERR(pm_runtime_active_auto_try, &pm))
 		return -ENXIO;
 
-	switch (dev->flags & MODEL_MASK) {
-	case MODEL_AMD_NAVI_GPU:
-		return amd_i2c_dw_xfer_quirk(adap, msgs, num);
-	default:
-		break;
-	}
-
 	reinit_completion(&dev->cmd_complete);
 	dev->msgs = msgs;
 	dev->msgs_num = num;
@@ -908,6 +905,11 @@ static const struct i2c_algorithm i2c_dw_algo = {
 	.functionality = i2c_dw_func,
 };
 
+static const struct i2c_algorithm amd_i2c_dw_algo = {
+	.xfer = amd_i2c_dw_xfer_quirk,
+	.functionality = i2c_dw_func,
+};
+
 static const struct i2c_adapter_quirks i2c_dw_quirks = {
 	.flags = I2C_AQ_NO_ZERO_LEN,
 };
@@ -1043,7 +1045,10 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 		scnprintf(adap->name, sizeof(adap->name),
 			  "Synopsys DesignWare I2C adapter");
 	adap->retries = 3;
-	adap->algo = &i2c_dw_algo;
+	if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU)
+		adap->algo = &amd_i2c_dw_algo;
+	else
+		adap->algo = &i2c_dw_algo;
 	adap->quirks = &i2c_dw_quirks;
 	adap->dev.parent = dev->dev;
 	i2c_set_adapdata(adap, dev);

-- 
2.51.1