* Not getting MCP with RT_PREEMPT on MPC8313
@ 2010-08-11 13:10 Esben Haabendal
0 siblings, 0 replies; only message in thread
From: Esben Haabendal @ 2010-08-11 13:10 UTC (permalink / raw)
To: linux-rt-users@vger.kernel.org
Hi
I am using 2.6.33.7-rt29 with RT_PREEMPT for
I have a custom MPC8313 board with a signal on the IRQ0/MCP_IN pin.
With 2.6.33.7-rt29 configured with RT_PREEMPT I don't get a
machine_check_exception when the IRQ0 pin goes low.
Configuring the same kernel with PREEMPT instead, I get the
machine_check_exception.
Using 2.6.33 configured with PREEMPT also works.
Any known issues? I have been digging a bit around, and is open to
suggestions on where to go next.
/Esben
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-08-11 13:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-11 13:10 Not getting MCP with RT_PREEMPT on MPC8313 Esben Haabendal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).