linux-rt-users.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>, <ssantosh@kernel.org>,
	Kevin Hilman <khilman@deeprootsystems.com>, <tony@atomide.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>,
	<linux-omap@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	<linux-rt-users@vger.kernel.org>
Subject: [RFC PATCH 6/7] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock
Date: Tue, 18 Aug 2015 14:10:57 +0300	[thread overview]
Message-ID: <1439896258-26449-7-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1439896258-26449-1-git-send-email-grygorii.strashko@ti.com>

The PM runtime API can't be used in atomic contex on -RT even if
it's configured as irqsafe. As result, below error report can
be seen when PM runtime API called from IRQ chip's callbacks
irq_startup/irq_shutdown/irq_set_type, because they are
protected by RAW spinlock:

BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: insmod
3 locks held by insmod/96:
 #0:  (&dev->mutex){......}, at: [<c04752c8>] __driver_attach+0x54/0xa0
 #1:  (&dev->mutex){......}, at: [<c04752d4>] __driver_attach+0x60/0xa0
 #2:  (class){......}, at: [<c00a408c>] __irq_get_desc_lock+0x60/0xa4
irq event stamp: 1834
hardirqs last  enabled at (1833): [<c06ab2a4>] _raw_spin_unlock_irqrestore+0x88/0x90
hardirqs last disabled at (1834): [<c06ab068>] _raw_spin_lock_irqsave+0x2c/0x64
softirqs last  enabled at (0): [<c003d220>] copy_process.part.52+0x410/0x19d8
softirqs last disabled at (0): [<  (null)>]   (null)
Preemption disabled at:[<  (null)>]   (null)

CPU: 1 PID: 96 Comm: insmod Tainted: G        W  O    4.1.3-rt3-00618-g57e2387-dirty #184
Hardware name: Generic DRA74X (Flattened Device Tree)
[<c00190f4>] (unwind_backtrace) from [<c0014734>] (show_stack+0x20/0x24)
[<c0014734>] (show_stack) from [<c06a62ec>] (dump_stack+0x88/0xdc)
[<c06a62ec>] (dump_stack) from [<c006ca44>] (___might_sleep+0x198/0x2a8)
[<c006ca44>] (___might_sleep) from [<c06ab6d4>] (rt_spin_lock+0x30/0x70)
[<c06ab6d4>] (rt_spin_lock) from [<c04815ac>] (__pm_runtime_resume+0x68/0xa4)
[<c04815ac>] (__pm_runtime_resume) from [<c04123f4>] (omap_gpio_irq_type+0x188/0x1d8)
[<c04123f4>] (omap_gpio_irq_type) from [<c00a64e4>] (__irq_set_trigger+0x68/0x130)
[<c00a64e4>] (__irq_set_trigger) from [<c00a7bc4>] (irq_set_irq_type+0x44/0x6c)
[<c00a7bc4>] (irq_set_irq_type) from [<c00abbf8>] (irq_create_of_mapping+0x120/0x174)
[<c00abbf8>] (irq_create_of_mapping) from [<c0577b74>] (of_irq_get+0x48/0x58)
[<c0577b74>] (of_irq_get) from [<c0540a14>] (i2c_device_probe+0x54/0x15c)
[<c0540a14>] (i2c_device_probe) from [<c04750dc>] (driver_probe_device+0x184/0x2c8)
[<c04750dc>] (driver_probe_device) from [<c0475310>] (__driver_attach+0x9c/0xa0)
[<c0475310>] (__driver_attach) from [<c0473238>] (bus_for_each_dev+0x7c/0xb0)
[<c0473238>] (bus_for_each_dev) from [<c0474af4>] (driver_attach+0x28/0x30)
[<c0474af4>] (driver_attach) from [<c0474760>] (bus_add_driver+0x154/0x200)
[<c0474760>] (bus_add_driver) from [<c0476348>] (driver_register+0x88/0x108)
[<c0476348>] (driver_register) from [<c0541600>] (i2c_register_driver+0x3c/0x90)
[<c0541600>] (i2c_register_driver) from [<bf003018>] (pcf857x_init+0x18/0x24 [gpio_pcf857x])
[<bf003018>] (pcf857x_init [gpio_pcf857x]) from [<c000998c>] (do_one_initcall+0x128/0x1e8)
[<c000998c>] (do_one_initcall) from [<c06a4220>] (do_init_module+0x6c/0x1bc)
[<c06a4220>] (do_init_module) from [<c00dd0c8>] (load_module+0x18e8/0x21c4)
[<c00dd0c8>] (load_module) from [<c00ddaa0>] (SyS_init_module+0xfc/0x158)
[<c00ddaa0>] (SyS_init_module) from [<c000ff40>] (ret_fast_syscall+0x0/0x54)

The IRQ chip interface defines only two callbacks which are executed in
non-atomic contex - irq_bus_lock/irq_bus_sync_unlock, so lets move
PM runtime calls there.

Cc: <linux-rt-users@vger.kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/gpio/gpio-omap.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2ae0d47..c33595e 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -496,9 +496,6 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
 		(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
 		return -EINVAL;
 
-	if (!BANK_USED(bank))
-		pm_runtime_get_sync(bank->dev);
-
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	retval = omap_set_gpio_triggering(bank, offset, type);
 	if (retval) {
@@ -521,8 +518,6 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
 	return 0;
 
 error:
-	if (!BANK_USED(bank))
-		pm_runtime_put(bank->dev);
 	return retval;
 }
 
@@ -797,9 +792,6 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
 	unsigned long flags;
 	unsigned offset = d->hwirq;
 
-	if (!BANK_USED(bank))
-		pm_runtime_get_sync(bank->dev);
-
 	raw_spin_lock_irqsave(&bank->lock, flags);
 
 	if (!LINE_USED(bank->mod_usage, offset))
@@ -815,8 +807,6 @@ static unsigned int omap_gpio_irq_startup(struct irq_data *d)
 	return 0;
 err:
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
-	if (!BANK_USED(bank))
-		pm_runtime_put(bank->dev);
 	return -EINVAL;
 }
 
@@ -835,6 +825,19 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
 		omap_clear_gpio_debounce(bank, offset);
 	omap_disable_gpio_module(bank, offset);
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+static void omap_gpio_irq_bus_lock(struct irq_data *data)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(data);
+
+	if (!BANK_USED(bank))
+		pm_runtime_get_sync(bank->dev);
+}
+
+static void gpio_irq_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_bank *bank = omap_irq_data_get_bank(data);
 
 	/*
 	 * If this is the last IRQ to be freed in the bank,
@@ -1181,6 +1184,8 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	irqc->irq_unmask = omap_gpio_unmask_irq,
 	irqc->irq_set_type = omap_gpio_irq_type,
 	irqc->irq_set_wake = omap_gpio_wake_enable,
+	irqc->irq_bus_lock = omap_gpio_irq_bus_lock,
+	irqc->irq_bus_sync_unlock = gpio_irq_bus_sync_unlock,
 	irqc->name = dev_name(&pdev->dev);
 
 	bank->irq = platform_get_irq(pdev, 0);
-- 
2.5.0

       reply	other threads:[~2015-08-18 11:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1439896258-26449-1-git-send-email-grygorii.strashko@ti.com>
2015-08-18 11:10 ` Grygorii Strashko [this message]
2015-09-24 22:28   ` [RFC PATCH 6/7] gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlock Linus Walleij
2015-09-24 22:35     ` Grygorii Strashko
2015-08-18 11:10 ` [RFC PATCH 7/7] gpio: omap: convert to use generic irq handler Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439896258-26449-7-git-send-email-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=gnurou@gmail.com \
    --cc=javier@dowhile0.org \
    --cc=khilman@deeprootsystems.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).