[PATCH] mlock.2: document that is a bad idea to fork() after mlock()

[PATCH] mlock.2: document that is a bad idea to fork() after mlock()

[Sebastian Andrzej Siewior]

fork() will remove the write PTE bit from the page table on each VMA
which will be copied via COW. A such such, the memory is available but
marked read only in the page table and will fault on write access.
This renders the previous mlock() operation almost useless because in a
multi threaded application the RT thread may block on mmap_sem while the
thread with low priority is holding the mmap_sem (for instance because
it is allocating memory which needs to be mapped in).

There is actually nothing we can do to mitigate the outcome. We could
add a warning to the kernel for people that are not yet aware of the
updated documentation.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
---
 man2/mlock.2 | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/man2/mlock.2 b/man2/mlock.2
index e34bb3b4e045..27f80f6664ef 100644
--- a/man2/mlock.2
+++ b/man2/mlock.2
@@ -350,6 +350,20 @@ settings are not inherited by a child created via
 and are cleared during an
 .BR execve (2).
 
+Note that
+.BR fork (2)
+will prepare the address space for a copy-on-write operation. The consequence
+is that any write access that follows will cause a page fault which in turn may
+cause high latencies for a real-time process. Therefore it is crucial not to
+invoke
+.BR fork (2)
+after the
+.BR mlockall ()
+or
+.BR mlock ()
+operation not even from thread which runs at a low priority within a process
+which also has a thread running at elevated priority.
+
 The memory lock on an address range is automatically removed
 if the address range is unmapped via
 .BR munmap (2).
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mlock.2: document that is a bad idea to fork() after mlock()

[Michael Kerrisk (man-pages)]

Hello Sebastian

On 08/30/2016 08:59 PM, Sebastian Andrzej Siewior wrote:
> fork() will remove the write PTE bit from the page table on each VMA
> which will be copied via COW. A such such, the memory is available but
> marked read only in the page table and will fault on write access.
> This renders the previous mlock() operation almost useless because in a
> multi threaded application the RT thread may block on mmap_sem while the
> thread with low priority is holding the mmap_sem (for instance because
> it is allocating memory which needs to be mapped in).
> 
> There is actually nothing we can do to mitigate the outcome. We could
> add a warning to the kernel for people that are not yet aware of the
> updated documentation.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>

Thanks! Patch applied.

Cheers,

Michael

> ---
>  man2/mlock.2 | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/man2/mlock.2 b/man2/mlock.2
> index e34bb3b4e045..27f80f6664ef 100644
> --- a/man2/mlock.2
> +++ b/man2/mlock.2
> @@ -350,6 +350,20 @@ settings are not inherited by a child created via
>  and are cleared during an
>  .BR execve (2).
>  
> +Note that
> +.BR fork (2)
> +will prepare the address space for a copy-on-write operation. The consequence
> +is that any write access that follows will cause a page fault which in turn may
> +cause high latencies for a real-time process. Therefore it is crucial not to
> +invoke
> +.BR fork (2)
> +after the
> +.BR mlockall ()
> +or
> +.BR mlock ()
> +operation not even from thread which runs at a low priority within a process
> +which also has a thread running at elevated priority.
> +
>  The memory lock on an address range is automatically removed
>  if the address range is unmapped via
>  .BR munmap (2).
> 


-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html