linux-rt-users.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org,
	linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Carsten Emde <C.Emde@osadl.org>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	John Kacur <jkacur@redhat.com>
Subject: [PATCH RT 0/8] Linux 3.2.53-rt76-rc1
Date: Wed, 15 Jan 2014 20:58:24 -0500	[thread overview]
Message-ID: <20140116015824.201732155@goodmis.org> (raw)


Dear RT Folks,

This is the RT stable review cycle of patch 3.2.53-rt76-rc1.

Note, the reason I did not release this earlier, was that I found
that the v3.2-rt series was locking up with my cpu hotplug stress test.
I finally got some time to debug this, and found that the problem was
in the invalidate_bh_lrs() where it was stuck in the on_each_cpu() call
where it was waiting for an offline CPU. Looking at what 3.4-rt does,
which does not have this problem, there were three patches in mainline
from Gilad Ben-Yossef that appears to fix the issue. At least it
makes the symptom go away. I may look into this deeper to make sure
that we did not just make a race window much harder to hit, and really
did fix the problem. But as 3.2-rt is now as stable as 3.4-rt and later
I can finally release this candidate.

Please scream at me if I messed something up. Please test the patches too.

The -rc release will be uploaded to kernel.org and will be deleted when
the final release is out. This is just a review release (or release candidate).

The pre-releases will not be pushed to the git repository, only the
final release is.

If all goes well, this patch will be converted to the next main release
on 1/17/2014.

Enjoy,

-- Steve


To build 3.2.53-rt76-rc1 directly, the following patches should be applied:

  http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.2.tar.xz

  http://www.kernel.org/pub/linux/kernel/v3.x/patch-3.2.53.xz

  http://www.kernel.org/pub/linux/kernel/projects/rt/3.2/patch-3.2.53-rt76-rc1.patch.xz

You can also build from 3.2.53-rt75 by applying the incremental patch:

http://www.kernel.org/pub/linux/kernel/projects/rt/3.2/incr/patch-3.2.53-rt75-rt76-rc1.patch.xz


Changes from 3.2.53-rt75:

---


Gilad Ben-Yossef (3):
      smp: introduce a generic on_each_cpu_mask() function
      smp: add func to IPI cpus based on parameter func
      fs: only send IPI to invalidate LRU BH when needed

Peter Zijlstra (1):
      lockdep: Correctly annotate hardirq context in irq_exit()

Sebastian Andrzej Siewior (2):
      swait: Add a few more users
      rtmutex: use a trylock for waiter lock in trylock

Steven Rostedt (Red Hat) (1):
      Linux 3.2.53-rt76-rc1

Tiejun Chen (1):
      cpu_down: move migrate_enable() back

----
 arch/arm/kernel/smp_tlb.c                  | 20 ++-----
 arch/tile/include/asm/smp.h                |  7 ---
 arch/tile/kernel/smp.c                     | 19 -------
 drivers/net/wireless/orinoco/orinoco_usb.c |  2 +-
 drivers/usb/gadget/f_fs.c                  |  2 +-
 drivers/usb/gadget/inode.c                 |  4 +-
 fs/buffer.c                                | 15 ++++-
 include/linux/smp.h                        | 46 +++++++++++++++
 include/linux/spinlock_rt.h                |  1 +
 kernel/cpu.c                               |  2 +-
 kernel/rtmutex.c                           | 31 ++++++++--
 kernel/smp.c                               | 90 ++++++++++++++++++++++++++++++
 kernel/softirq.c                           | 45 ++++++++++++++-
 kernel/timer.c                             |  2 +-
 localversion-rt                            |  2 +-
 15 files changed, 232 insertions(+), 56 deletions(-)

             reply	other threads:[~2014-01-16  1:58 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-16  1:58 Steven Rostedt [this message]
2014-01-16  1:58 ` [PATCH RT 1/8] cpu_down: move migrate_enable() back Steven Rostedt
2014-01-16  1:58 ` [PATCH RT 2/8] swait: Add a few more users Steven Rostedt
2014-01-16  1:58 ` [PATCH RT 3/8] lockdep: Correctly annotate hardirq context in irq_exit() Steven Rostedt
2014-01-16  1:58 ` [PATCH RT 4/8] rtmutex: use a trylock for waiter lock in trylock Steven Rostedt
2014-01-16  3:08   ` Mike Galbraith
2014-01-17  4:22     ` Steven Rostedt
2014-01-17  5:17       ` Mike Galbraith
2014-01-31 22:07         ` Sebastian Andrzej Siewior
2014-02-01  4:21           ` Mike Galbraith
2014-02-01  4:54             ` Mike Galbraith
2014-01-16  1:58 ` [PATCH RT 5/8] smp: introduce a generic on_each_cpu_mask() function Steven Rostedt
2014-01-16  1:58 ` [PATCH RT 6/8] smp: add func to IPI cpus based on parameter func Steven Rostedt
2014-01-16  1:58 ` [PATCH RT 7/8] fs: only send IPI to invalidate LRU BH when needed Steven Rostedt
2014-01-16  1:58 ` [PATCH RT 8/8] Linux 3.2.53-rt76-rc1 Steven Rostedt
2014-01-16  9:41 ` [PATCH RT 0/8] " Pavel Vasilyev
2014-01-16 14:18   ` Steven Rostedt
2014-01-16 14:36     ` Pavel Vasilyev
2014-01-16 15:09       ` Steven Rostedt
2014-01-16 16:08       ` Steven Rostedt
2014-01-16 17:19         ` Pavel Vasilyev
2014-01-16 16:18       ` Sebastian Andrzej Siewior
2014-01-17 13:01 ` Rolf Peukert
2014-01-17 13:21   ` Steven Rostedt
2014-01-17 15:40     ` Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140116015824.201732155@goodmis.org \
    --to=rostedt@goodmis.org \
    --cc=C.Emde@osadl.org \
    --cc=bigeasy@linutronix.de \
    --cc=jkacur@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).