[PATCH RT 0/3] Linux 3.12.15-rt26-rc1

[PATCH RT 0/3] Linux 3.12.15-rt26-rc1

[Steven Rostedt]

Dear RT Folks,

The 3.12-rt kernel is entering the stable phase. But instead of
just pulling the last development version into stable, there
were a few bugs that needed to be fixed first. The 3.12.15-rt26
will go through an rc phase before it is officially released as
stable.

This is the RT stable review cycle of patch 3.12.15-rt26-rc1.

Please scream at me if I messed something up. Please test the patches too.

The -rc release will be uploaded to kernel.org and will be deleted when
the final release is out. This is just a review release (or release candidate).

The pre-releases will not be pushed to the git repository, only the
final release is.

If all goes well, this patch will be converted to the next main release
on 5/2/2014.

Enjoy,

-- Steve


To build 3.12.15-rt26-rc1 directly, the following patches should be applied:

  http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.12.tar.xz

  http://www.kernel.org/pub/linux/kernel/v3.x/patch-3.12.15.xz

  http://www.kernel.org/pub/linux/kernel/projects/rt/3.12/patch-3.12.15-rt26-rc1.patch.xz

You can also build from 3.12.15-rt25 by applying the incremental patch:

http://www.kernel.org/pub/linux/kernel/projects/rt/3.12/incr/patch-3.12.15-rt25-rt26-rc1.patch.xz


Changes from 3.12.15-rt25:

---


Steven Rostedt (1):
      rt: Move migrate_disable up in trylocks

Steven Rostedt (Red Hat) (2):
      net: gianfar: Fix missing return of gfar_clean_tx_ring()
      Linux 3.12.15-rt26-rc1

----
 drivers/net/ethernet/freescale/gianfar.c |  1 +
 kernel/rt.c                              | 20 ++++++++++++--------
 localversion-rt                          |  2 +-
 3 files changed, 14 insertions(+), 9 deletions(-)

[PATCH RT 1/3] rt: Move migrate_disable up in trylocks

[Steven Rostedt]

[-- Attachment #1: 0001-rt-Move-migrate_disable-up-in-trylocks.patch --]
[-- Type: text/plain, Size: 2105 bytes --]

3.12.15-rt26-rc1 stable review patch.
If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <rostedt@goodmis.org>

The changes to move the migrate_disable() down in the trylocks()
caused race conditions to appear in the cpu hotplug code. The
migrate disables must be done before any of the rtmutexes are
taken, otherwise a lock may be held that prevents hotplug from
moving forward.

Link: http://lkml.kernel.org/r/20140429201308.63292691@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
---
 kernel/rt.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/kernel/rt.c b/kernel/rt.c
index 5d17727..5f44def 100644
--- a/kernel/rt.c
+++ b/kernel/rt.c
@@ -180,12 +180,15 @@ EXPORT_SYMBOL(_mutex_unlock);
  */
 int __lockfunc rt_write_trylock(rwlock_t *rwlock)
 {
-	int ret = rt_mutex_trylock(&rwlock->lock);
+	int ret;
+
+	migrate_disable();
+	ret = rt_mutex_trylock(&rwlock->lock);
 
-	if (ret) {
+	if (ret)
 		rwlock_acquire(&rwlock->dep_map, 0, 1, _RET_IP_);
-		migrate_disable();
-	}
+	else
+		migrate_enable();
 
 	return ret;
 }
@@ -212,11 +215,12 @@ int __lockfunc rt_read_trylock(rwlock_t *rwlock)
 	 * write locked.
 	 */
 	if (rt_mutex_owner(lock) != current) {
+		migrate_disable();
 		ret = rt_mutex_trylock(lock);
-		if (ret) {
+		if (ret)
 			rwlock_acquire(&rwlock->dep_map, 0, 1, _RET_IP_);
-			migrate_disable();
-		}
+		else
+			migrate_enable();
 	} else if (!rwlock->read_depth) {
 		ret = 0;
 	}
@@ -245,8 +249,8 @@ void __lockfunc rt_read_lock(rwlock_t *rwlock)
 	 */
 	if (rt_mutex_owner(lock) != current) {
 		rwlock_acquire(&rwlock->dep_map, 0, 0, _RET_IP_);
-		__rt_spin_lock(lock);
 		migrate_disable();
+		__rt_spin_lock(lock);
 	}
 	rwlock->read_depth++;
 }
-- 
1.8.5.3

[PATCH RT 2/3] net: gianfar: Fix missing return of gfar_clean_tx_ring()

[Steven Rostedt]

[-- Attachment #1: 0002-net-gianfar-Fix-missing-return-of-gfar_clean_tx_ring.patch --]
[-- Type: text/plain, Size: 1131 bytes --]

3.12.15-rt26-rc1 stable review patch.
If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

The patch "net: gianfar: do not try to cleanup TX packets if they are
not done" for 3.12-rt left out the return value for gfar_clean_tx_ring().
This would cause an error when building this module. Note, this module
does not build on x86 and was not tested because of that.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 drivers/net/ethernet/freescale/gianfar.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 091945c..df27493 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -2615,6 +2615,7 @@ static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 	tx_queue->dirty_tx = bdp;
 
 	netdev_tx_completed_queue(txq, howmany, bytes_sent);
+	return howmany;
 }
 
 static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp)
-- 
1.8.5.3

[PATCH RT 3/3] Linux 3.12.15-rt26-rc1

[Steven Rostedt]

[-- Attachment #1: 0003-Linux-3.12.15-rt26-rc1.patch --]
[-- Type: text/plain, Size: 406 bytes --]

3.12.15-rt26-rc1 stable review patch.
If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

---
 localversion-rt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/localversion-rt b/localversion-rt
index c5b71f9..02556f4 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt25
+-rt26-rc1
-- 
1.8.5.3

Re: [PATCH RT 1/3] rt: Move migrate_disable up in trylocks

[Sebastian Andrzej Siewior]

On 05/01/2014 02:47 AM, Steven Rostedt wrote:

Could this wait until it appears in the development release?

Sebastian

Re: [PATCH RT 1/3] rt: Move migrate_disable up in trylocks

[Steven Rostedt]

On Fri, 02 May 2014 09:11:23 +0200
Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:

> On 05/01/2014 02:47 AM, Steven Rostedt wrote:
> 
> Could this wait until it appears in the development release?

I would need to delay the release then as I wont release a kernel that
fails the cpu stress test.

I don't have a problem with delaying this though.

-- Steve

Re: [PATCH RT 1/3] rt: Move migrate_disable up in trylocks

[Sebastian Andrzej Siewior]

* Steven Rostedt | 2014-04-30 20:47:58 [-0400]:

>From: Steven Rostedt <rostedt@goodmis.org>
>
>The changes to move the migrate_disable() down in the trylocks()
>caused race conditions to appear in the cpu hotplug code. The
>migrate disables must be done before any of the rtmutexes are
>taken, otherwise a lock may be held that prevents hotplug from
>moving forward.
>
>Link: http://lkml.kernel.org/r/20140429201308.63292691@gandalf.local.home

Okay. I am taking a modified version (so it applies) of this into v3.14
tree. Mike also suggested to drop
migrate_disable-pushd-down-in-atomic_dec_and_spin_lo.patch because we
which is basicaly the some thing. And then we have
migrate_disable-pushd-down-in-rt_spin_trylock_irqsav.patch which we
could drop as well for the same reason.

Sebastian