From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: rafael@kernel.org, sudeep.holla@arm.com, ulf.hansson@linaro.org
Cc: linux-pm@vger.kernel.org, linux-rt-users@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Raghavendra Kakarla <quic_rkakarla@quicinc.com>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Clark Williams <clrkwllms@kernel.org>,
Steven Rostedt <rostedt@goodmis.org>,
linux-rt-devel@lists.linux.dev (open list:Real-time Linux
(PREEMPT_RT))
Subject: [PATCH] cpuidle: psci: Fix cpuhotplug routine with PREEMPT_RT=y
Date: Wed, 9 Jul 2025 17:47:28 +0200 [thread overview]
Message-ID: <20250709154728.733920-1-daniel.lezcano@linaro.org> (raw)
Currently cpu hotplug with the PREEMPT_RT option set in the kernel is
not supported because the underlying generic power domain functions
used in the cpu hotplug callbacks are incompatible from a lock point
of view. This situation prevents the suspend to idle to reach the
deepest idle state for the "cluster" as identified in the
undermentioned commit.
Use the compatible ones when PREEMPT_RT is enabled and remove the
boolean disabling the hotplug callbacks with this option.
With this change the platform can reach the deepest idle state
allowing at suspend time to consume less power.
Tested-on Lenovo T14s with the following script:
echo 0 > /sys/devices/system/cpu/cpu3/online
BEFORE=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }') ;
rtcwake -s 1 -m mem;
AFTER=$(cat /sys/kernel/debug/pm_genpd/power-domain-cpu-cluster0/idle_states | grep S0 | awk '{ print $3 }');
if [ $BEFORE -lt $AFTER ]; then
echo "Test successful"
else
echo "Test failed"
fi
echo 1 > /sys/devices/system/cpu/cpu3/online
Fixes: 1c4b2932bd62 ("cpuidle: psci: Enable the hierarchical topology for s2idle on PREEMPT_RT")
Cc: Raghavendra Kakarla <quic_rkakarla@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/cpuidle/cpuidle-psci.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
index 4e1ba35deda9..b19bc60cc627 100644
--- a/drivers/cpuidle/cpuidle-psci.c
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -45,7 +45,6 @@ struct psci_cpuidle_domain_state {
static DEFINE_PER_CPU_READ_MOSTLY(struct psci_cpuidle_data, psci_cpuidle_data);
static DEFINE_PER_CPU(struct psci_cpuidle_domain_state, psci_domain_state);
static bool psci_cpuidle_use_syscore;
-static bool psci_cpuidle_use_cpuhp;
void psci_set_domain_state(struct generic_pm_domain *pd, unsigned int state_idx,
u32 state)
@@ -124,8 +123,12 @@ static int psci_idle_cpuhp_up(unsigned int cpu)
{
struct device *pd_dev = __this_cpu_read(psci_cpuidle_data.dev);
- if (pd_dev)
- pm_runtime_get_sync(pd_dev);
+ if (pd_dev) {
+ if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+ pm_runtime_get_sync(pd_dev);
+ else
+ dev_pm_genpd_resume(pd_dev);
+ }
return 0;
}
@@ -135,7 +138,11 @@ static int psci_idle_cpuhp_down(unsigned int cpu)
struct device *pd_dev = __this_cpu_read(psci_cpuidle_data.dev);
if (pd_dev) {
- pm_runtime_put_sync(pd_dev);
+ if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+ pm_runtime_put_sync(pd_dev);
+ else
+ dev_pm_genpd_suspend(pd_dev);
+
/* Clear domain state to start fresh at next online. */
psci_clear_domain_state();
}
@@ -196,9 +203,6 @@ static void psci_idle_init_cpuhp(void)
{
int err;
- if (!psci_cpuidle_use_cpuhp)
- return;
-
err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING,
"cpuidle/psci:online",
psci_idle_cpuhp_up,
@@ -259,10 +263,8 @@ static int psci_dt_cpu_init_topology(struct cpuidle_driver *drv,
* s2ram and s2idle.
*/
drv->states[state_count - 1].enter_s2idle = psci_enter_s2idle_domain_idle_state;
- if (!IS_ENABLED(CONFIG_PREEMPT_RT)) {
+ if (!IS_ENABLED(CONFIG_PREEMPT_RT))
drv->states[state_count - 1].enter = psci_enter_domain_idle_state;
- psci_cpuidle_use_cpuhp = true;
- }
return 0;
}
@@ -339,7 +341,6 @@ static void psci_cpu_deinit_idle(int cpu)
dt_idle_detach_cpu(data->dev);
psci_cpuidle_use_syscore = false;
- psci_cpuidle_use_cpuhp = false;
}
static int psci_idle_init_cpu(struct device *dev, int cpu)
--
2.43.0
next reply other threads:[~2025-07-09 15:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-09 15:47 Daniel Lezcano [this message]
2025-07-10 12:43 ` [PATCH] cpuidle: psci: Fix cpuhotplug routine with PREEMPT_RT=y Rafael J. Wysocki
2025-07-10 12:57 ` Sudeep Holla
2025-07-10 14:40 ` Ulf Hansson
2025-07-14 11:12 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250709154728.733920-1-daniel.lezcano@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=bigeasy@linutronix.de \
--cc=clrkwllms@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=linux-rt-users@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=quic_rkakarla@quicinc.com \
--cc=rafael@kernel.org \
--cc=rostedt@goodmis.org \
--cc=sudeep.holla@arm.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).