linux-rt-users.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robin Gareus <robin@gareus.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Gregory Haskins <ghaskins@novell.com>, linux-rt-users@vger.kernel.org
Subject: Re: 2.6.29-rt1+ irqbalance = OOPS
Date: Mon, 30 Mar 2009 15:43:00 +0200	[thread overview]
Message-ID: <49D0CC64.5010605@gareus.org> (raw)
In-Reply-To: <49CE48FD.5040506@gareus.org>

Robin Gareus wrote:

> The corresponding .config is available at
> http://rg42.org/_media/wiki/kernel/config-2.6.29-rt1.txt

BTW. This is a vanilla 2.6.29 with only the 2.6.29-rt1 patch applied.

> I just tested Fernando's CCRMA 2.6.29-rt1 kernel which is x686 plus
> generic x86-compat (mine is MCORE2) and irqbalance does not produce an
> OOPS there.
> 
> I'll see if can get a dump of the OOPS on Monday using netconsole.

If the netconsole module is loaded, the OOPS is produced without the
Call and Stack Trace (both on local terminal and remote) and the cause
is no longer the keyboard-interrupt but ethernet (IRQ 28)

Starting `irqbalance` still reliably hangs this system (Thinkpad X60s).

------------[ cut here ]------------
kernel BUG at kernel/sched_rt.c:1602!
invalid opcode: 0000 [#1] PREEMPT SMP kernel BUG at kernel/sched_rt.c:1602!
invalid opcode: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/irq
Modules linked in: netconsole ipv6 nfsd exportfs nfs lockd nfs_acl
auth_rpcgss sunrpc deflate zlib_deflate twofish twofish_common camellia
serpent blowfish des_generic cbc aes_i586 aes_generic xcbc rmd160
sha256_generic sha1_generic
last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/irq
Modules linked in: netconsole ipv6 nfsd exportfs nfs lockd nfs_acl
auth_rpcgss sunrpc deflate zlib_deflate twofish twofish_common camellia
serpent blowfish des_generic cbc aes_i586 aes_generic xcbc rmd160
sha256_generic sha1_generic


-=-=-=-=-

# lspci ..

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02) (prog-if 00 [Normal decode])

# cat /proc/interrupts

          CPU0       CPU1
  0:     416869          0   IO-APIC-edge      timer
  1:       2921          0   IO-APIC-edge      i8042
  8:         48          0   IO-APIC-edge      rtc0
  9:      36105          0   IO-APIC-fasteoi   acpi
 12:      23294          0   IO-APIC-edge      i8042
 14:      19922          0   IO-APIC-edge      ata_piix
 15:          0          0   IO-APIC-edge      ata_piix
 16:          0          0   IO-APIC-fasteoi   uhci_hcd:usb2, yenta,
i915@pci:0000:00:02.0
 17:      51665          0   IO-APIC-fasteoi   uhci_hcd:usb3, ohci1394,
HDA Intel
 18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4, mmc0
 19:         28          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb5
 28:       2669          0   PCI-MSI-edge      eth1
 29:        449          0   PCI-MSI-edge      iwl3945
NMI:          0          0   Non-maskable interrupts
LOC:      79098     252004   Local timer interrupts
SPU:          0          0   Spurious interrupts
CNT:          0          0   Performance counter interrupts
RES:      86816     141218   Rescheduling interrupts
CAL:       6852       5954   Function call interrupts
TLB:        268        266   TLB shootdowns
TRM:          0          0   Thermal event interrupts
ERR:          0
MIS:          0

  reply	other threads:[~2009-03-30 13:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-27 16:16 2.6.29-rt1+ irqbalance = OOPS Robin Gareus
2009-03-27 16:49 ` Gregory Haskins
2009-03-27 17:24   ` Robin Gareus
2009-03-28 14:37     ` Thomas Gleixner
2009-03-28 15:57       ` Robin Gareus
2009-03-30 13:43         ` Robin Gareus [this message]
2009-04-01  6:43           ` Thomas Gleixner
2009-04-04 11:20             ` Robin Gareus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49D0CC64.5010605@gareus.org \
    --to=robin@gareus.org \
    --cc=ghaskins@novell.com \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).