[PATCH 00/15][ANNOUNCE] 3.18.117-rt105-rc1

[PATCH 00/15][ANNOUNCE] 3.18.117-rt105-rc1

[Tom Zanussi]

Hello RT Folks!

This is the RT stable review cycle of patch 3.18.117-rt105-rc1.

In addition to the applicable stable-rt patches not yet in the 3.18-rt
kernel, this set includes some patches needed to fix cross-compilation
build failures.

Please scream at me if I messed something up. Please test the patches
too.

The -rc release will be uploaded to kernel.org and will be deleted
when the final release is out. This is just a review release (or
release candidate).

The pre-releases will not be pushed to the git repository, only the
final release is.

If all goes well, this patch will be converted to the next main
release on 8/9/2018.

To build 3.18.117-rt105-rc1 directly, the following patches should be applied:

  http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.18.tar.xz

  http://www.kernel.org/pub/linux/kernel/v3.x/patch-3.18.117.xz

  http://www.kernel.org/pub/linux/kernel/projects/rt/3.18/patch-3.18.117-rt105-rc1.patch.xz


You can also build from 3.18.117-rt104 by applying the incremental patch:

  http://www.kernel.org/pub/linux/kernel/projects/rt/3.18/incr/patch-3.18.117-rt104-rt105-rc1.patch.xz

Enjoy!
   
   Tom


Anton Blanchard (1):
  powerpc/vdso64: Use double word compare on pointers

Julia Cartwright (2):
  seqlock: provide the same ordering semantics as mainline
  squashfs: make use of local lock in multi_cpu decompressor

Krzysztof Mazur (1):
  um: Use POSIX ucontext_t instead of struct ucontext

Paul Gortmaker (1):
  powerpc: ps3/device-init.c - adapt to completions using swait vs wait

Peter Zijlstra (1):
  sched: Remove TASK_ALL

Philipp Schrader (1):
  tracing: Fix rcu splat from idle CPU on boot

Sebastian Andrzej Siewior (5):
  arm*: disable NEON in kernel mode
  posix-timers: move the rcu head out of the union
  alarmtimer: Prevent live lock in alarm_cancel()
  locking: add types.h
  net: use task_struct instead of CPU number as the queue owner on -RT

Tom Zanussi (3):
  Revert "fs, jbd: pull your plug when waiting for space"
  s390/mm: Fix missed tsk->pagefault_disabled conversion to
    pagefault_disable()
  Linux 3.18.117-rt105-rc1

 arch/arm/Kconfig                          |  2 +-
 arch/arm64/crypto/Kconfig                 | 14 ++++----
 arch/powerpc/kernel/vdso64/datapage.S     |  2 +-
 arch/powerpc/kernel/vdso64/gettimeofday.S |  2 +-
 arch/powerpc/platforms/ps3/device-init.c  |  2 +-
 arch/s390/mm/fault.c                      |  2 +-
 arch/um/os-Linux/signal.c                 |  2 +-
 arch/x86/um/stub_segv.c                   |  2 +-
 fs/jbd/checkpoint.c                       |  2 --
 fs/squashfs/decompressor_multi_percpu.c   | 16 ++++++---
 include/linux/netdevice.h                 | 54 +++++++++++++++++++++++++++----
 include/linux/posix-timers.h              |  2 +-
 include/linux/sched.h                     |  1 -
 include/linux/seqlock.h                   |  1 +
 include/linux/spinlock_types_raw.h        |  2 ++
 kernel/time/alarmtimer.c                  |  2 +-
 kernel/time/posix-timers.c                |  4 +--
 kernel/trace/trace_irqsoff.c              |  4 +--
 localversion-rt                           |  2 +-
 net/core/dev.c                            |  6 +++-
 20 files changed, 89 insertions(+), 35 deletions(-)

-- 
2.14.1

[PATCH 01/15] sched: Remove TASK_ALL

[Tom Zanussi]

From: Peter Zijlstra <peterz@infradead.org>

It's unused:

$ git grep "\<TASK_ALL\>" | wc -l
1

And dangerous, kill the bugger.

Cc: stable-rt@vger.kernel.org
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit ffb940123ed607f1cba0d1f7c281ca92feac9733)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>

 Conflicts:
	include/linux/sched.h
---
 include/linux/sched.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index cc7349a2c0cf..fbe198d733c2 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -228,7 +228,6 @@ extern char ___assert_task_state[1 - 2*!!(
 
 /* Convenience macros for the sake of wake_up */
 #define TASK_NORMAL		(TASK_INTERRUPTIBLE | TASK_UNINTERRUPTIBLE)
-#define TASK_ALL		(TASK_NORMAL | __TASK_STOPPED | __TASK_TRACED)
 
 /* get_task_state() */
 #define TASK_REPORT		(TASK_RUNNING | TASK_INTERRUPTIBLE | \
-- 
2.14.1

[PATCH 02/15] arm*: disable NEON in kernel mode

[Tom Zanussi]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

NEON in kernel mode is used by the crypto algorithms and raid6 code.
While the raid6 code looks okay, the crypto algorithms do not: NEON
is enabled on first invocation and may allocate/free/map memory before
the NEON mode is disabled again.
This needs to be changed until it can be enabled.
On ARM NEON in kernel mode can be simply disabled. on ARM64 it needs to
stay on due to possible EFI callbacks so here I disable each algorithm.

Cc: stable-rt@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Wagner <wagi@monom.org>
(cherry picked from commit 728b41d8e7b5307b52bdbffcb492bc8345a4e38a)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 arch/arm/Kconfig          |  2 +-
 arch/arm64/crypto/Kconfig | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d635abf51063..12b1e7a5f103 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2122,7 +2122,7 @@ config NEON
 
 config KERNEL_MODE_NEON
 	bool "Support for NEON in kernel mode"
-	depends on NEON && AEABI
+	depends on NEON && AEABI && !PREEMPT_RT_BASE
 	help
 	  Say Y to include support for NEON in kernel mode.
 
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 5562652c5316..003fe0718117 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -10,42 +10,42 @@ if ARM64_CRYPTO
 
 config CRYPTO_SHA1_ARM64_CE
 	tristate "SHA-1 digest algorithm (ARMv8 Crypto Extensions)"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_HASH
 
 config CRYPTO_SHA2_ARM64_CE
 	tristate "SHA-224/SHA-256 digest algorithm (ARMv8 Crypto Extensions)"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_HASH
 
 config CRYPTO_GHASH_ARM64_CE
 	tristate "GHASH (for GCM chaining mode) using ARMv8 Crypto Extensions"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_HASH
 
 config CRYPTO_AES_ARM64_CE
 	tristate "AES core cipher using ARMv8 Crypto Extensions"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES
 
 config CRYPTO_AES_ARM64_CE_CCM
 	tristate "AES in CCM mode using ARMv8 Crypto Extensions"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES
 	select CRYPTO_AEAD
 
 config CRYPTO_AES_ARM64_CE_BLK
 	tristate "AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_AES
 	select CRYPTO_ABLK_HELPER
 
 config CRYPTO_AES_ARM64_NEON_BLK
 	tristate "AES in ECB/CBC/CTR/XTS modes using NEON instructions"
-	depends on ARM64 && KERNEL_MODE_NEON
+	depends on ARM64 && KERNEL_MODE_NEON && !PREEMPT_RT_BASE
 	select CRYPTO_BLKCIPHER
 	select CRYPTO_AES
 	select CRYPTO_ABLK_HELPER
-- 
2.14.1

[PATCH 03/15] posix-timers: move the rcu head out of the union

[Tom Zanussi]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

On RT the timer can be preempted while running and therefore we wait
with timer_wait_for_callback() for the timer to complete (instead of
busy looping). The RCU-readlock is held to ensure that this posix timer
is not removed while we wait on it.
If the timer is removed then it invokes call_rcu() with a pointer that
is shared with the hrtimer because it is part of the same union.
In order to avoid any possible side effects I am moving the rcu pointer
out of the union.

Cc: stable-rt@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Wagner <wagi@monom.org>
(cherry picked from commit 57f93c5f597fa32af860321c5bca34bc5ffe08e1)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 include/linux/posix-timers.h | 2 +-
 kernel/time/posix-timers.c   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index 907f3fd191ac..e2e43c61f6a1 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -92,8 +92,8 @@ struct k_itimer {
 			struct alarm alarmtimer;
 			ktime_t interval;
 		} alarm;
-		struct rcu_head rcu;
 	} it;
+	struct rcu_head rcu;
 };
 
 struct k_clock {
diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c
index b5e0ff549422..bdf91054e6c3 100644
--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -560,7 +560,7 @@ static struct k_itimer * alloc_posix_timer(void)
 
 static void k_itimer_rcu_free(struct rcu_head *head)
 {
-	struct k_itimer *tmr = container_of(head, struct k_itimer, it.rcu);
+	struct k_itimer *tmr = container_of(head, struct k_itimer, rcu);
 
 	kmem_cache_free(posix_timers_cache, tmr);
 }
@@ -577,7 +577,7 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set)
 	}
 	put_pid(tmr->it_pid);
 	sigqueue_free(tmr->sigq);
-	call_rcu(&tmr->it.rcu, k_itimer_rcu_free);
+	call_rcu(&tmr->rcu, k_itimer_rcu_free);
 }
 
 static struct k_clock *clockid_to_kclock(const clockid_t id)
-- 
2.14.1

[PATCH 04/15] tracing: Fix rcu splat from idle CPU on boot

[Tom Zanussi]

From: Philipp Schrader <philipp@peloton-tech.com>

With PREEMPT_RT and most of the lockdep-related options enabled I
encountered this splat when booting our DRA7 evaluation module:

[    0.055073]
[    0.055076] ===============================
[    0.055079] [ INFO: suspicious RCU usage. ]
[    0.055084] 4.1.6+ #2 Not tainted
[    0.055086] -------------------------------
[    0.055090] include/trace/events/hist.h:31 suspicious
rcu_dereference_check() usage!
[    0.055093]
[    0.055093] other info that might help us debug this:
[    0.055093]
[    0.055097]
[    0.055097] RCU used illegally from idle CPU!
[    0.055097] rcu_scheduler_active = 1, debug_locks = 1
[    0.055100] RCU used illegally from extended quiescent state!
[    0.055104] no locks held by swapper/0/0.
[    0.055106]
[    0.055106] stack backtrace:
[    0.055112] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.6+ #2
[    0.055116] Hardware name: Generic DRA74X (Flattened Device Tree)
[    0.055130] [<c00196b8>] (unwind_backtrace) from [<c001515c>]
(show_stack+0x20/0x24)
[    0.055146] [<c001515c>] (show_stack) from [<c07bc408>]
(dump_stack+0x84/0xa0)
[    0.055160] [<c07bc408>] (dump_stack) from [<c009bc38>]
(lockdep_rcu_suspicious+0xb0/0x110)
[    0.055172] [<c009bc38>] (lockdep_rcu_suspicious) from [<c01246c4>]
(time_hardirqs_off+0x2b8/0x3c8)
[    0.055184] [<c01246c4>] (time_hardirqs_off) from [<c009a218>]
(trace_hardirqs_off_caller+0x2c/0xf4)
[    0.055194] [<c009a218>] (trace_hardirqs_off_caller) from
[<c009a2f4>] (trace_hardirqs_off+0x14/0x18)
[    0.055204] [<c009a2f4>] (trace_hardirqs_off) from [<c00c7ecc>]
(rcu_idle_enter+0x78/0xcc)
[    0.055213] [<c00c7ecc>] (rcu_idle_enter) from [<c0093eb0>]
(cpu_startup_entry+0x190/0x518)
[    0.055222] [<c0093eb0>] (cpu_startup_entry) from [<c07b95b4>]
(rest_init+0x13c/0x17c)
[    0.055231] [<c07b95b4>] (rest_init) from [<c0b32c74>]
(start_kernel+0x320/0x380)
[    0.055238] [<c0b32c74>] (start_kernel) from [<8000807c>] (0x8000807c)

As per Steve Rotstedt's suggestion I changed the trace_* calls to
trace_*_rcuidle calls. He pointed out that the trace points were getting
triggered when rcu wasn't watching.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable-rt@vger.kernel.org
(cherry picked from commit ac56e4167d84ada099f2af0d1d53f4742d577ce9)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 kernel/trace/trace_irqsoff.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index d1940b095d85..9cbc38722905 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -452,7 +452,7 @@ EXPORT_SYMBOL_GPL(stop_critical_timings);
 #ifdef CONFIG_PROVE_LOCKING
 void time_hardirqs_on(unsigned long a0, unsigned long a1)
 {
-	trace_preemptirqsoff_hist(IRQS_ON, 0);
+	trace_preemptirqsoff_hist_rcuidle(IRQS_ON, 0);
 	if (!preempt_trace() && irq_trace())
 		stop_critical_timing(a0, a1);
 }
@@ -461,7 +461,7 @@ void time_hardirqs_off(unsigned long a0, unsigned long a1)
 {
 	if (!preempt_trace() && irq_trace())
 		start_critical_timing(a0, a1);
-	trace_preemptirqsoff_hist(IRQS_OFF, 1);
+	trace_preemptirqsoff_hist_rcuidle(IRQS_OFF, 1);
 }
 
 #else /* !CONFIG_PROVE_LOCKING */
-- 
2.14.1

[PATCH 05/15] alarmtimer: Prevent live lock in alarm_cancel()

[Tom Zanussi]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

If alarm_try_to_cancel() requires a retry, then depending on the
priority setting the retry loop might prevent timer callback completion
on RT. Prevent that by waiting for completion on RT, no change for a
non RT kernel.

Cc: stable-rt@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit 51e376c469bf05f32cb1ceb9e39d31bb92f1f6c8)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 kernel/time/alarmtimer.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 119847b93ba6..5a5e05fc92a3 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -395,7 +395,7 @@ int alarm_cancel(struct alarm *alarm)
 		int ret = alarm_try_to_cancel(alarm);
 		if (ret >= 0)
 			return ret;
-		cpu_relax();
+		hrtimer_wait_for_timer(&alarm->timer);
 	}
 }
 EXPORT_SYMBOL_GPL(alarm_cancel);
-- 
2.14.1

[PATCH 06/15] locking: add types.h

[Tom Zanussi]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

During the stable update the arm architecture did not compile anymore
due to missing definition of u16/32.

Cc: stable-rt@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit 1289b06974d64f244a26455fab699c6a1332f4bc)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 include/linux/spinlock_types_raw.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/spinlock_types_raw.h b/include/linux/spinlock_types_raw.h
index edffc4d53fc9..03235b475b77 100644
--- a/include/linux/spinlock_types_raw.h
+++ b/include/linux/spinlock_types_raw.h
@@ -1,6 +1,8 @@
 #ifndef __LINUX_SPINLOCK_TYPES_RAW_H
 #define __LINUX_SPINLOCK_TYPES_RAW_H
 
+#include <linux/types.h>
+
 #if defined(CONFIG_SMP)
 # include <asm/spinlock_types.h>
 #else
-- 
2.14.1

[PATCH 07/15] net: use task_struct instead of CPU number as the queue owner on -RT

[Tom Zanussi]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

In commit ("net: move xmit_recursion to per-task variable on -RT") the
recursion level was changed to be per-task since we can get preempted in
BH on -RT. The lock owner should consequently be recorded as the task
that holds the lock and not the CPU. Otherwise we trigger the "Dead loop
on virtual device" warning on SMP systems.

Cc: stable-rt@vger.kernel.org
Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit 910142bad86ec1031c63b0b37575b2537ef5c27d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>

 Conflicts:
	net/core/dev.c
---
 include/linux/netdevice.h | 54 +++++++++++++++++++++++++++++++++++++++++------
 net/core/dev.c            |  6 +++++-
 2 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 2bb8ddaf641e..9cc578ba2037 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -556,7 +556,11 @@ struct netdev_queue {
  * write mostly part
  */
 	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
+#ifdef CONFIG_PREEMPT_RT_FULL
+	struct task_struct	*xmit_lock_owner;
+#else
 	int			xmit_lock_owner;
+#endif
 	/*
 	 * please use this field instead of dev->trans_start
 	 */
@@ -3080,41 +3084,79 @@ static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
 	return (1 << debug_value) - 1;
 }
 
+#ifdef CONFIG_PREEMPT_RT_FULL
+static inline void netdev_queue_set_owner(struct netdev_queue *txq, int cpu)
+{
+	txq->xmit_lock_owner = current;
+}
+
+static inline void netdev_queue_clear_owner(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = NULL;
+}
+
+static inline bool netdev_queue_has_owner(struct netdev_queue *txq)
+{
+	if (txq->xmit_lock_owner != NULL)
+		return true;
+	return false;
+}
+
+#else
+
+static inline void netdev_queue_set_owner(struct netdev_queue *txq, int cpu)
+{
+	txq->xmit_lock_owner = cpu;
+}
+
+static inline void netdev_queue_clear_owner(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+}
+
+static inline bool netdev_queue_has_owner(struct netdev_queue *txq)
+{
+	if (txq->xmit_lock_owner != -1)
+		return true;
+	return false;
+}
+#endif
+
 static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
 {
 	spin_lock(&txq->_xmit_lock);
-	txq->xmit_lock_owner = cpu;
+	netdev_queue_set_owner(txq, cpu);
 }
 
 static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
 {
 	spin_lock_bh(&txq->_xmit_lock);
-	txq->xmit_lock_owner = smp_processor_id();
+	netdev_queue_set_owner(txq, smp_processor_id());
 }
 
 static inline bool __netif_tx_trylock(struct netdev_queue *txq)
 {
 	bool ok = spin_trylock(&txq->_xmit_lock);
 	if (likely(ok))
-		txq->xmit_lock_owner = smp_processor_id();
+		netdev_queue_set_owner(txq, smp_processor_id());
 	return ok;
 }
 
 static inline void __netif_tx_unlock(struct netdev_queue *txq)
 {
-	txq->xmit_lock_owner = -1;
+	netdev_queue_clear_owner(txq);
 	spin_unlock(&txq->_xmit_lock);
 }
 
 static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
 {
-	txq->xmit_lock_owner = -1;
+	netdev_queue_clear_owner(txq);
 	spin_unlock_bh(&txq->_xmit_lock);
 }
 
 static inline void txq_trans_update(struct netdev_queue *txq)
 {
-	if (txq->xmit_lock_owner != -1)
+	if (netdev_queue_has_owner(txq))
 		txq->trans_start = jiffies;
 }
 
diff --git a/net/core/dev.c b/net/core/dev.c
index eb39270ac306..bbdec43abe1c 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3028,7 +3028,11 @@ static int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
 	if (dev->flags & IFF_UP) {
 		int cpu = smp_processor_id(); /* ok because BHs are off */
 
+#ifdef CONFIG_PREEMPT_RT_FULL
+		if (txq->xmit_lock_owner != current) {
+#else
 		if (txq->xmit_lock_owner != cpu) {
+#endif
 
 			if (xmit_rec_read() > RECURSION_LIMIT)
 				goto recursion_alert;
@@ -6233,7 +6237,7 @@ static void netdev_init_one_queue(struct net_device *dev,
 	/* Initialize queue lock */
 	spin_lock_init(&queue->_xmit_lock);
 	netdev_set_xmit_lockdep_class(&queue->_xmit_lock, dev->type);
-	queue->xmit_lock_owner = -1;
+	netdev_queue_clear_owner(queue);
 	netdev_queue_numa_node_write(queue, NUMA_NO_NODE);
 	queue->dev = dev;
 #ifdef CONFIG_BQL
-- 
2.14.1

[PATCH 08/15] seqlock: provide the same ordering semantics as mainline

[Tom Zanussi]

From: Julia Cartwright <julia@ni.com>

The mainline implementation of read_seqbegin() orders prior loads w.r.t.
the read-side critical section.  Fixup the RT writer-boosting
implementation to provide the same guarantee.

Also, while we're here, update the usage of ACCESS_ONCE() to use
READ_ONCE().

Fixes: e69f15cf77c23 ("seqlock: Prevent rt starvation")
Cc: stable-rt@vger.kernel.org
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit afa4c06b89a3c0fb7784ff900ccd707bef519cb7)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 include/linux/seqlock.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 4acd0e2fb5cb..efa234031230 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -338,6 +338,7 @@ repeat:
 		spin_unlock_wait(&sl->lock);
 		goto repeat;
 	}
+	smp_rmb();
 	return ret;
 }
 #endif
-- 
2.14.1

[PATCH 09/15] squashfs: make use of local lock in multi_cpu decompressor

[Tom Zanussi]

From: Julia Cartwright <julia@ni.com>

Currently, the squashfs multi_cpu decompressor makes use of
get_cpu_ptr()/put_cpu_ptr(), which unconditionally disable preemption
during decompression.

Because the workload is distributed across CPUs, all CPUs can observe a
very high wakeup latency, which has been seen to be as much as 8000us.

Convert this decompressor to make use of a local lock, which will allow
execution of the decompressor with preemption-enabled, but also ensure
concurrent accesses to the percpu compressor data on the local CPU will
be serialized.

Cc: stable-rt@vger.kernel.org
Reported-by: Alexander Stein <alexander.stein@systec-electronic.com>
Tested-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit c160736542d7b3d67da32848d2f028b8e35730e5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 fs/squashfs/decompressor_multi_percpu.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/fs/squashfs/decompressor_multi_percpu.c b/fs/squashfs/decompressor_multi_percpu.c
index 23a9c28ad8ea..6a73c4fa88e7 100644
--- a/fs/squashfs/decompressor_multi_percpu.c
+++ b/fs/squashfs/decompressor_multi_percpu.c
@@ -10,6 +10,7 @@
 #include <linux/slab.h>
 #include <linux/percpu.h>
 #include <linux/buffer_head.h>
+#include <linux/locallock.h>
 
 #include "squashfs_fs.h"
 #include "squashfs_fs_sb.h"
@@ -25,6 +26,8 @@ struct squashfs_stream {
 	void		*stream;
 };
 
+static DEFINE_LOCAL_IRQ_LOCK(stream_lock);
+
 void *squashfs_decompressor_create(struct squashfs_sb_info *msblk,
 						void *comp_opts)
 {
@@ -79,10 +82,15 @@ int squashfs_decompress(struct squashfs_sb_info *msblk, struct buffer_head **bh,
 {
 	struct squashfs_stream __percpu *percpu =
 			(struct squashfs_stream __percpu *) msblk->stream;
-	struct squashfs_stream *stream = get_cpu_ptr(percpu);
-	int res = msblk->decompressor->decompress(msblk, stream->stream, bh, b,
-		offset, length, output);
-	put_cpu_ptr(stream);
+	struct squashfs_stream *stream;
+	int res;
+
+	stream = get_locked_ptr(stream_lock, percpu);
+
+	res = msblk->decompressor->decompress(msblk, stream->stream, bh, b,
+			offset, length, output);
+
+	put_locked_ptr(stream_lock, stream);
 
 	if (res < 0)
 		ERROR("%s decompression failed, data probably corrupt\n",
-- 
2.14.1

[PATCH 10/15] Revert "fs, jbd: pull your plug when waiting for space"

[Tom Zanussi]

This reverts commit 3b5cf23e6b87a938522eb074baeb034e66dc9cb3.

Similar to commit d5bc2c7b2cc0 Revert "fs: jbd2: pull your plug when
waiting for space", according to Sebastian Siewior: this "is the same
thing but for ext3/jbd.  The code was removed at some point so I did
not revert in my tree."

>From the original commit message: "This was a duct-tape fix which
shouldn't be needed since commit "locking/rt-mutex: fix deadlock in
device mapper / block-IO".

Cc: stable-rt@vger.kernel.org
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 fs/jbd/checkpoint.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 95debd71e5fa..08c03044abdd 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -129,8 +129,6 @@ void __log_wait_for_space(journal_t *journal)
 		if (journal->j_flags & JFS_ABORT)
 			return;
 		spin_unlock(&journal->j_state_lock);
-		if (current->plug)
-			io_schedule();
 		mutex_lock(&journal->j_checkpoint_mutex);
 
 		/*
-- 
2.14.1

Re: [PATCH 00/15][ANNOUNCE] 3.18.117-rt105-rc1

[Sebastian Andrzej Siewior]

On 2018-08-02 17:25:15 [-0500], Tom Zanussi wrote:
> Please scream at me if I messed something up. Please test the patches
> too.

The series claims to have 15 patches and I see only the first 10 (in my
inbox, rt-users and linux-kernel).

> Enjoy!
>    
>    Tom

Sebastian

Re: [PATCH 00/15][ANNOUNCE] 3.18.117-rt105-rc1

[Tom Zanussi]

Hi Sebastian,

On 8/3/2018 2:32 AM, Sebastian Andrzej Siewior wrote:
> On 2018-08-02 17:25:15 [-0500], Tom Zanussi wrote:
>> Please scream at me if I messed something up. Please test the patches
>> too.
> 
> The series claims to have 15 patches and I see only the first 10 (in my
> inbox, rt-users and linux-kernel).
> 

Yeah, my script was broken and didn't send the last third - resent. 
Thanks for letting me know,

Tom

>> Enjoy!
>>     
>>     Tom
> 
> Sebastian
> 

[PATCH 11/15] powerpc/vdso64: Use double word compare on pointers

[Tom Zanussi]

From: Anton Blanchard <anton@samba.org>

commit 5045ea37377ce8cca6890d32b127ad6770e6dce5 upstream.

__kernel_get_syscall_map() and __kernel_clock_getres() use cmpli to
check if the passed in pointer is non zero. cmpli maps to a 32 bit
compare on binutils, so we ignore the top 32 bits.

A simple test case can be created by passing in a bogus pointer with
the bottom 32 bits clear. Using a clk_id that is handled by the VDSO,
then one that is handled by the kernel shows the problem:

  printf("%d\n", clock_getres(CLOCK_REALTIME, (void *)0x100000000));
  printf("%d\n", clock_getres(CLOCK_BOOTTIME, (void *)0x100000000));

And we get:

  0
  -1

The bigger issue is if we pass a valid pointer with the bottom 32 bits
clear, in this case we will return success but won't write any data
to the pointer.

I stumbled across this issue because the LLVM integrated assembler
doesn't accept cmpli with 3 arguments. Fix this by converting them to
cmpldi.

Fixes: a7f290dad32e ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel")
Cc: stable@vger.kernel.org # v2.6.15+
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
(cherry picked from commit 0edffe75fc811fa5181ea202a1ad26bf17fd58f5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 arch/powerpc/kernel/vdso64/datapage.S     | 2 +-
 arch/powerpc/kernel/vdso64/gettimeofday.S | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index 79796de11737..3263ee23170d 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -57,7 +57,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
 	bl	V_LOCAL_FUNC(__get_datapage)
 	mtlr	r12
 	addi	r3,r3,CFG_SYSCALL_MAP64
-	cmpli	cr0,r4,0
+	cmpldi	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
 	li	r0,__NR_syscalls
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index a76b4af37ef2..382021324883 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -145,7 +145,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres)
 	bne	cr0,99f
 
 	li	r3,0
-	cmpli	cr0,r4,0
+	cmpldi	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
 	lis	r5,CLOCK_REALTIME_RES@h
-- 
2.14.1

[PATCH 12/15] powerpc: ps3/device-init.c - adapt to completions using swait vs wait

[Tom Zanussi]

From: Paul Gortmaker <paul.gortmaker@windriver.com>

To fix:

  cc1: warnings being treated as errors
  arch/powerpc/platforms/ps3/device-init.c: In function 'ps3_notification_read_write':
  arch/powerpc/platforms/ps3/device-init.c:755:2: error: passing argument 1 of 'prepare_to_wait_event' from incompatible pointer type
  arch/powerpc/platforms/ps3/device-init.c:755:2: error: passing argument 1 of 'abort_exclusive_wait' from incompatible pointer type
  arch/powerpc/platforms/ps3/device-init.c:755:2: error: passing argument 1 of 'finish_wait' from incompatible pointer type
  arch/powerpc/platforms/ps3/device-init.o] Error 1
  make[3]: *** Waiting for unfinished jobs....

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
(cherry picked from commit 360395995f05ef133534d7ae74e01aea233623a6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 arch/powerpc/platforms/ps3/device-init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 3f175e8aedb4..c4c02f91904c 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -752,7 +752,7 @@ static int ps3_notification_read_write(struct ps3_notification_device *dev,
 	}
 	pr_debug("%s:%u: notification %s issued\n", __func__, __LINE__, op);
 
-	res = wait_event_interruptible(dev->done.wait,
+	res = swait_event_interruptible(dev->done.wait,
 				       dev->done.done || kthread_should_stop());
 	if (kthread_should_stop())
 		res = -EINTR;
-- 
2.14.1

[PATCH 13/15] s390/mm: Fix missed tsk->pagefault_disabled conversion to pagefault_disable()

[Tom Zanussi]

commit 7be67fb433a0 ("mm: pagefault_disabled()") does this for s390:

  -       if (unlikely(!user_space_fault(regs) || in_atomic() || !mm ||
  +       if (unlikely(!user_space_fault(regs) || !mm ||
                       tsk->pagefault_disabled))

  whereas elsewhere it does the right thing e.g other arches:

  -       if (in_atomic() || !mm || current->pagefault_disabled)
  +       if (!mm || pagefault_disabled())

i.e. because of the linebreak it misses the tsk->pagefault_disabled
and leaves it unconverted.

So fix that up and use pagefault_disabled() as intended.

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 arch/s390/mm/fault.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 43ec237a17e2..466154e1dfc0 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -436,7 +436,7 @@ static inline int do_exception(struct pt_regs *regs, int access)
 	 */
 	fault = VM_FAULT_BADCONTEXT;
 	if (unlikely(!user_space_fault(regs) || !mm ||
-		     tsk->pagefault_disabled))
+		     pagefault_disabled()))
 		goto out;
 
 	address = trans_exc_code & __FAIL_ADDR_MASK;
-- 
2.14.1

[PATCH 14/15] um: Use POSIX ucontext_t instead of struct ucontext

[Tom Zanussi]

From: Krzysztof Mazur <krzysiek@podlesie.net>

glibc 2.26 removed the 'struct ucontext' to "improve" POSIX compliance
and break programs, including User Mode Linux. Fix User Mode Linux
by using POSIX ucontext_t.

This fixes:

arch/um/os-Linux/signal.c: In function 'hard_handler':
arch/um/os-Linux/signal.c:163:22: error: dereferencing pointer to incomplete type 'struct ucontext'
  mcontext_t *mc = &uc->uc_mcontext;
arch/x86/um/stub_segv.c: In function 'stub_segv_handler':
arch/x86/um/stub_segv.c:16:13: error: dereferencing pointer to incomplete type 'struct ucontext'
          &uc->uc_mcontext);

Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
(cherry picked from commit 4d1a535b8ec5e74b42dfd9dc809142653b2597f6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 arch/um/os-Linux/signal.c | 2 +-
 arch/x86/um/stub_segv.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 7b605e4dfffa..2ac6a7e5a179 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -135,7 +135,7 @@ static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
 
 static void hard_handler(int sig, siginfo_t *si, void *p)
 {
-	struct ucontext *uc = p;
+	ucontext_t *uc = p;
 	mcontext_t *mc = &uc->uc_mcontext;
 	unsigned long pending = 1UL << sig;
 
diff --git a/arch/x86/um/stub_segv.c b/arch/x86/um/stub_segv.c
index 1518d2805ae8..fd6825537b97 100644
--- a/arch/x86/um/stub_segv.c
+++ b/arch/x86/um/stub_segv.c
@@ -10,7 +10,7 @@
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_segv_handler(int sig, siginfo_t *info, void *p)
 {
-	struct ucontext *uc = p;
+	ucontext_t *uc = p;
 
 	GET_FAULTINFO_FROM_MC(*((struct faultinfo *) STUB_DATA),
 			      &uc->uc_mcontext);
-- 
2.14.1

[PATCH 15/15] Linux 3.18.117-rt105-rc1

[Tom Zanussi]

---
 localversion-rt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/localversion-rt b/localversion-rt
index d068aedeebe2..39f988470301 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt104
+-rt105-rc1
-- 
2.14.1