From: <Sergiu.Moga@microchip.com>
To: <alexandre.belloni@bootlin.com>
Cc: <a.zummo@towertech.it>, <robh+dt@kernel.org>,
<krzysztof.kozlowski@canonical.com>,
<Nicolas.Ferre@microchip.com>, <Claudiu.Beznea@microchip.com>,
<linux-rtc@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 1/5] ARM: dts: at91: Move rtt node properties from "dts" file to "dtsi" file
Date: Fri, 4 Mar 2022 13:10:51 +0000 [thread overview]
Message-ID: <135b9e40-531c-963e-2d72-6c88643a34d2@microchip.com> (raw)
In-Reply-To: <YiDns7xc5mTg7WzH@piout.net>
On 03.03.2022 18:07, Alexandre Belloni wrote:
> On 03/03/2022 16:06:22+0200, Sergiu Moga wrote:
>> Move the properties of the rtt node of RTT IPs from the "dts" file to the
>> "dtsi" file, since it is more IP specific than it is board specific.
>>
> The fact that it uses a specific GPBR register makes it board specific
> so I don't really agree with this patch.
>
Ah, I see. I will remove this patch from the series then.
>> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
>> ---
>> arch/arm/boot/dts/at91-sam9x60ek.dts | 5 -----
>> arch/arm/boot/dts/at91-sama7g5ek.dts | 4 ----
>> arch/arm/boot/dts/at91sam9260.dtsi | 1 +
>> arch/arm/boot/dts/at91sam9260ek.dts | 1 -
>> arch/arm/boot/dts/at91sam9g45.dtsi | 1 +
>> arch/arm/boot/dts/at91sam9m10g45ek.dts | 1 -
>> arch/arm/boot/dts/sam9x60.dtsi | 1 +
>> arch/arm/boot/dts/sama7g5.dtsi | 1 +
>> 8 files changed, 4 insertions(+), 11 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
>> index b1068cca4228..97ff91346cb4 100644
>> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
>> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
>> @@ -656,11 +656,6 @@ kernel@200000 {
>> };
>> };
>>
>> -&rtt {
>> - atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> - status = "okay";
>> -};
>> -
>> &shutdown_controller {
>> debounce-delay-us = <976>;
>> status = "okay";
>> diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
>> index ccf9e224da78..b7416d9469e3 100644
>> --- a/arch/arm/boot/dts/at91-sama7g5ek.dts
>> +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
>> @@ -708,10 +708,6 @@ &pwm {
>> status = "disabled"; /* Conflict with leds. */
>> };
>>
>> -&rtt {
>> - atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> -};
>> -
>> &sdmmc0 {
>> bus-width = <8>;
>> non-removable;
>> diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
>> index 7368347c9357..66d11c8f1a9b 100644
>> --- a/arch/arm/boot/dts/at91sam9260.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9260.dtsi
>> @@ -713,6 +713,7 @@ rtc@fffffd20 {
>> reg = <0xfffffd20 0x10>;
>> interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
>> + atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> status = "disabled";
>> };
>>
>> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
>> index ce96345d28a3..6932dab42f2e 100644
>> --- a/arch/arm/boot/dts/at91sam9260ek.dts
>> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
>> @@ -118,7 +118,6 @@ shdwc@fffffd10 {
>> };
>>
>> rtc@fffffd20 {
>> - atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> status = "okay";
>> };
>>
>> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
>> index 2ab730fd6472..fd308e2c15e8 100644
>> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
>> @@ -929,6 +929,7 @@ rtc@fffffd20 {
>> reg = <0xfffffd20 0x10>;
>> interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> clocks = <&clk32k>;
>> + atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> status = "disabled";
>> };
>>
>> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> index b6256a20fbc7..07bfa8ef715d 100644
>> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
>> @@ -220,7 +220,6 @@ pwm0: pwm@fffb8000 {
>> };
>>
>> rtc@fffffd20 {
>> - atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> status = "okay";
>> };
>>
>> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
>> index ec45ced3cde6..57ba47c54043 100644
>> --- a/arch/arm/boot/dts/sam9x60.dtsi
>> +++ b/arch/arm/boot/dts/sam9x60.dtsi
>> @@ -693,6 +693,7 @@ rtt: rtt@fffffe20 {
>> reg = <0xfffffe20 0x20>;
>> interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> clocks = <&clk32k 0>;
>> + atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> };
>>
>> pit: timer@fffffe40 {
>> diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
>> index eddcfbf4d223..1530d88ce80f 100644
>> --- a/arch/arm/boot/dts/sama7g5.dtsi
>> +++ b/arch/arm/boot/dts/sama7g5.dtsi
>> @@ -138,6 +138,7 @@ rtt: rtt@e001d020 {
>> reg = <0xe001d020 0x30>;
>> interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> clocks = <&clk32k 0>;
>> + atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> };
>>
>> clk32k: clock-controller@e001d050 {
>> --
>> 2.25.1
>>
> --
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Thank you for the feedback.
Sergiu
next prev parent reply other threads:[~2022-03-04 13:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-03 14:06 [PATCH v2 0/5] dt-bindings: rtc: convert at91sam9 bindings to Sergiu Moga
2022-03-03 14:06 ` [PATCH v2 1/5] ARM: dts: at91: Move rtt node properties from "dts" file to "dtsi" file Sergiu Moga
2022-03-03 16:07 ` Alexandre Belloni
2022-03-04 13:10 ` Sergiu.Moga [this message]
2022-03-03 14:06 ` [PATCH v2 2/5] ARM: dts: at91: Add the required `atmel,rtt-rtc-time-reg` property Sergiu Moga
2022-03-04 11:06 ` [PATCH v2 2/5] ARM: dts: at91: Add the required `atmel, rtt-rtc-time-reg` property Tudor.Ambarus
2022-03-03 14:06 ` [PATCH v2 3/5] ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs Sergiu Moga
2022-03-03 14:47 ` Krzysztof Kozlowski
2022-03-04 11:13 ` Tudor.Ambarus
2022-03-03 14:06 ` [PATCH v2 4/5] dt-bindings: rtc: convert at91sam9 bindings to json-schema Sergiu Moga
2022-03-03 14:21 ` Krzysztof Kozlowski
2022-03-04 13:17 ` Sergiu.Moga
2022-03-03 14:06 ` [PATCH v2 5/5] dt-bindings: rtc: at91: Add SAMA7G5 compatible strings list Sergiu Moga
2022-03-03 14:48 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=135b9e40-531c-963e-2d72-6c88643a34d2@microchip.com \
--to=sergiu.moga@microchip.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).