[rtc-linux] Re: [PATCH v3 1/2] Documentation: devicetree: add epson rx6110 binding

[Philipp Zabel <p.zabel@pengutronix.de>]

Am Dienstag, den 08.12.2015, 10:54 +0100 schrieb Steffen Trumtrar:
> Add the binding documentation for the Epson RX6110 RTC.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

although I'd like a small change to be made below:

> ---
> Changes since v2:
> 	- removed the size field in i2c binding
> 
>  .../devicetree/bindings/rtc/epson,rx6110.txt       | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
> new file mode 100644
> index 000000000000..71353542a59d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
> @@ -0,0 +1,39 @@
> +Epson RX6110 Real Time Clock
> +============================
> +
> +The Epson RX6110 can be used with SPI or I2C busses. The kind of
> +bus depends on the SPISEL pin and can not be configured via software.
> +
> +I2C mode
> +--------
> +
> +Required properties:
> +  - compatible: should be: "epson,rx6110"
> +  - reg : offset of the register set of the device

That should be the I2C address of the device:
	git grep "reg.*I2C address" Documentation/

regards
Philipp


-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.