From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Sender: rtc-linux@googlegroups.com Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com. [62.209.51.94]) by gmr-mx.google.com with ESMTPS id y17si1940352wmh.3.2017.06.26.02.51.45 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 26 Jun 2017 02:51:45 -0700 (PDT) From: Amelie Delaunay To: Alessandro Zummo , Alexandre Belloni , Rob Herring , Mark Rutland , Maxime Coquelin , Alexandre Torgue CC: , , , , Amelie Delaunay Subject: [rtc-linux] [PATCH 1/2] dt-bindings: rtc: stm32: add support for STM32H7 Date: Mon, 26 Jun 2017 11:51:28 +0200 Message-ID: <1498470689-26829-2-git-send-email-amelie.delaunay@st.com> In-Reply-To: <1498470689-26829-1-git-send-email-amelie.delaunay@st.com> References: <1498470689-26829-1-git-send-email-amelie.delaunay@st.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Reply-To: rtc-linux@googlegroups.com List-ID: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , This patch documents support for STM32H7 Real Time Clock. It introduces a new compatible and rework clock definitions. On STM32H7 we have a 'pclk' clock for register access, in addition to the 'rtc_ck' clock. Signed-off-by: Amelie Delaunay --- .../devicetree/bindings/rtc/st,stm32-rtc.txt | 32 ++++++++++++++++++---- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt index e2837b9..0a4c371 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -1,17 +1,25 @@ STM32 Real Time Clock Required properties: -- compatible: "st,stm32-rtc". +- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on + the device is compatible with stm32(f4/f7) or stm32h7. - reg: address range of rtc register set. -- clocks: reference to the clock entry ck_rtc. +- clocks: can use up to two clocks, depending on part used: + - "rtc_ck": RTC clock source. + It is required on stm32(f4/f7) and stm32h7. + - "pclk": RTC APB interface clock. + It is not present on stm32(f4/f7). + It is required on stm32h7. +- clock-names: must be "rtc_ck" and "pclk". + It is required only on stm32h7. - interrupt-parent: phandle for the interrupt controller. - interrupts: rtc alarm interrupt. - st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain (RTC registers) write protection. -Optional properties (to override default ck_rtc parent clock): -- assigned-clocks: reference to the ck_rtc clock entry. -- assigned-clock-parents: phandle of the new parent clock of ck_rtc. +Optional properties (to override default rtc_ck parent clock): +- assigned-clocks: reference to the rtc_ck clock entry. +- assigned-clock-parents: phandle of the new parent clock of rtc_ck. Example: @@ -25,3 +33,17 @@ Example: interrupts = <17 1>; st,syscfg = <&pwrcfg>; }; + + rtc: rtc@58004000 { + compatible = "st,stm32h7-rtc"; + reg = <0x58004000 0x400>; + clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>; + clock-names = "pclk", "rtc_ck"; + assigned-clocks = <&rcc RTC_CK>; + assigned-clock-parents = <&rcc LSE_CK>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; + status = "disabled"; + }; -- 1.9.1 -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.