Linux RTC
 help / color / mirror / Atom feed
From: Aleksandar Markovic <aleksandar.markovic@rt-rk.com>
To: linux-mips@linux-mips.org
Cc: Miodrag Dinic <miodrag.dinic@imgtec.com>,
	Goran Ferenc <goran.ferenc@imgtec.com>,
	Aleksandar Markovic <aleksandar.markovic@imgtec.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Bo Hu <bohu@google.com>, "David S. Miller" <davem@davemloft.net>,
	Douglas Leung <douglas.leung@imgtec.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	James Hogan <james.hogan@imgtec.com>,
	Jin Qian <jinqian@google.com>,
	linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Paul Burton <paul.burton@imgtec.com>,
	Petar Jovanovic <petar.jovanovic@imgtec.com>,
	Raghu Gandham <raghu.gandham@imgtec.com>
Subject: [PATCH v3 2/8] MIPS: ranchu: Add Goldfish RTC driver
Date: Fri, 21 Jul 2017 18:53:31 +0200	[thread overview]
Message-ID: <1500656111-9520-3-git-send-email-aleksandar.markovic@rt-rk.com> (raw)
In-Reply-To: <1500656111-9520-1-git-send-email-aleksandar.markovic@rt-rk.com>

From: Miodrag Dinic <miodrag.dinic@imgtec.com>

Add device driver for a virtual Goldfish RTC clock.

The driver can be built only if CONFIG_MIPS and CONFIG_GOLDFISH are
set. The compatible string used by OS for binding the driver is
defined as "google,goldfish-rtc".

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
---
 MAINTAINERS                |   1 +
 drivers/rtc/Kconfig        |   8 ++
 drivers/rtc/Makefile       |   1 +
 drivers/rtc/rtc-goldfish.c | 233 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 243 insertions(+)
 create mode 100644 drivers/rtc/rtc-goldfish.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 847da3f..768426d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -845,6 +845,7 @@ ANDROID GOLDFISH RTC DRIVER
 M:	Miodrag Dinic <miodrag.dinic@imgtec.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
+F:	drivers/rtc/rtc-goldfish.c
 
 ANDROID ION DRIVER
 M:	Laura Abbott <labbott@redhat.com>
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 72419ac..7cd27d3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1780,5 +1780,13 @@ config RTC_DRV_HID_SENSOR_TIME
 	  If this driver is compiled as a module, it will be named
 	  rtc-hid-sensor-time.
 
+config RTC_DRV_GOLDFISH
+	tristate "Goldfish Real Time Clock"
+	depends on MIPS && GOLDFISH || COMPILE_TEST
+	help
+	  Say yes to enable RTC driver for the Goldfish based virtual platform.
+
+	  Goldfish is a code name for the virtual platform developed by Google
+	  for Android emulation.
 
 endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index acd366b..d995d49 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -170,3 +170,4 @@ obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
 obj-$(CONFIG_RTC_DRV_XGENE)	+= rtc-xgene.o
 obj-$(CONFIG_RTC_DRV_ZYNQMP)	+= rtc-zynqmp.o
+obj-$(CONFIG_RTC_DRV_GOLDFISH)	+= rtc-goldfish.o
diff --git a/drivers/rtc/rtc-goldfish.c b/drivers/rtc/rtc-goldfish.c
new file mode 100644
index 0000000..aa13062
--- /dev/null
+++ b/drivers/rtc/rtc-goldfish.c
@@ -0,0 +1,233 @@
+/* drivers/rtc/rtc-goldfish.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2017 Imagination Technologies Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define TIMER_TIME_LOW		0x00	/* get low bits of current time  */
+					/*   and update TIMER_TIME_HIGH  */
+#define TIMER_TIME_HIGH	0x04	/* get high bits of time at last */
+					/*   TIMER_TIME_LOW read         */
+#define TIMER_ALARM_LOW	0x08	/* set low bits of alarm and     */
+					/*   activate it                 */
+#define TIMER_ALARM_HIGH	0x0c	/* set high bits of next alarm   */
+#define TIMER_IRQ_ENABLED	0x10
+#define TIMER_CLEAR_ALARM	0x14
+#define TIMER_ALARM_STATUS	0x18
+#define TIMER_CLEAR_INTERRUPT	0x1c
+
+struct goldfish_rtc {
+	void __iomem *base;
+	u32 irq;
+	struct rtc_device *rtc;
+};
+
+static int goldfish_rtc_read_alarm(struct device *dev,
+		struct rtc_wkalrm *alrm)
+{
+	u64 rtc_alarm;
+	u64 rtc_alarm_low;
+	u64 rtc_alarm_high;
+	void __iomem *base;
+	struct goldfish_rtc *rtcdrv;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	rtc_alarm_low = readl(base + TIMER_ALARM_LOW);
+	rtc_alarm_high = readl(base + TIMER_ALARM_HIGH);
+	rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
+
+	do_div(rtc_alarm, NSEC_PER_SEC);
+	memset(alrm, 0, sizeof(struct rtc_wkalrm));
+
+	rtc_time_to_tm(rtc_alarm, &(alrm->time));
+
+	if (readl(base + TIMER_ALARM_STATUS))
+		alrm->enabled = 1;
+	else
+		alrm->enabled = 0;
+
+	return 0;
+}
+
+static int goldfish_rtc_set_alarm(struct device *dev,
+		struct rtc_wkalrm *alrm)
+{
+	struct goldfish_rtc *rtcdrv;
+	unsigned long rtc_alarm;
+	u64 rtc_status_reg;
+	void __iomem *base;
+	int ret = 0;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	if (alrm->enabled) {
+		ret = rtc_tm_to_time(&(alrm->time), &rtc_alarm);
+		if (ret != 0)
+			return ret;
+
+		rtc_alarm *= NSEC_PER_SEC;
+		writel((rtc_alarm >> 32), base + TIMER_ALARM_HIGH);
+		writel(rtc_alarm, base + TIMER_ALARM_LOW);
+	} else {
+		/*
+		 * if this function was called with enabled=0
+		 * then it could mean that the application is
+		 * trying to cancel an ongoing alarm
+		 */
+		rtc_status_reg = readl(base + TIMER_ALARM_STATUS);
+		if (rtc_status_reg)
+			writel(1, base + TIMER_CLEAR_ALARM);
+	}
+
+	return ret;
+}
+
+static int goldfish_rtc_alarm_irq_enable(struct device *dev,
+		unsigned int enabled)
+{
+	void __iomem *base;
+	struct goldfish_rtc *rtcdrv;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	if (enabled)
+		writel(1, base + TIMER_IRQ_ENABLED);
+	else
+		writel(0, base + TIMER_IRQ_ENABLED);
+
+	return 0;
+
+}
+
+static irqreturn_t goldfish_rtc_interrupt(int irq, void *dev_id)
+{
+	struct goldfish_rtc *rtcdrv = dev_id;
+	void __iomem *base = rtcdrv->base;
+
+	writel(1, base + TIMER_CLEAR_INTERRUPT);
+
+	rtc_update_irq(rtcdrv->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static int goldfish_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct goldfish_rtc *rtcdrv;
+	void __iomem *base;
+	u64 time_high;
+	u64 time_low;
+	u64 time;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	time_low = readl(base + TIMER_TIME_LOW);
+	time_high = readl(base + TIMER_TIME_HIGH);
+	time = (time_high << 32) | time_low;
+
+	do_div(time, NSEC_PER_SEC);
+
+	rtc_time_to_tm(time, tm);
+
+	return 0;
+}
+
+static int goldfish_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct goldfish_rtc *rtcdrv;
+	void __iomem *base;
+	unsigned long now;
+	int ret;
+
+	rtcdrv = dev_get_drvdata(dev);
+	base = rtcdrv->base;
+
+	ret = rtc_tm_to_time(tm, &now);
+	if (ret == 0) {
+		now *= NSEC_PER_SEC;
+		writel((now >> 32), base + TIMER_TIME_HIGH);
+		writel(now, base + TIMER_TIME_LOW);
+	}
+
+	return ret;
+}
+
+static const struct rtc_class_ops goldfish_rtc_ops = {
+	.read_time	= goldfish_rtc_read_time,
+	.set_time	= goldfish_rtc_set_time,
+	.read_alarm	= goldfish_rtc_read_alarm,
+	.set_alarm	= goldfish_rtc_set_alarm,
+	.alarm_irq_enable = goldfish_rtc_alarm_irq_enable
+};
+
+static int goldfish_rtc_probe(struct platform_device *pdev)
+{
+	struct resource *r;
+	struct goldfish_rtc *rtcdrv;
+	int err;
+
+	rtcdrv = devm_kzalloc(&pdev->dev, sizeof(*rtcdrv), GFP_KERNEL);
+	if (rtcdrv == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rtcdrv);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL)
+		return -ENODEV;
+
+	rtcdrv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(rtcdrv->base))
+		return -ENODEV;
+
+	rtcdrv->irq = platform_get_irq(pdev, 0);
+	if (rtcdrv->irq < 0)
+		return -ENODEV;
+
+	rtcdrv->rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+					&goldfish_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtcdrv->rtc))
+		return PTR_ERR(rtcdrv->rtc);
+
+	err = devm_request_irq(&pdev->dev, rtcdrv->irq, goldfish_rtc_interrupt,
+		0, pdev->name, rtcdrv);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct of_device_id goldfish_rtc_of_match[] = {
+	{ .compatible = "google,goldfish-rtc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_rtc_of_match);
+
+static struct platform_driver goldfish_rtc = {
+	.probe = goldfish_rtc_probe,
+	.driver = {
+		.name = "goldfish_rtc",
+		.of_match_table = goldfish_rtc_of_match,
+	}
+};
+
+module_platform_driver(goldfish_rtc);
-- 
2.7.4

  parent reply	other threads:[~2017-07-21 16:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1500656111-9520-1-git-send-email-aleksandar.markovic@rt-rk.com>
2017-07-21 16:53 ` [PATCH v3 1/8] Documentation: Add device tree binding for Goldfish RTC driver Aleksandar Markovic
2017-07-21 16:53 ` Aleksandar Markovic [this message]
2017-07-23 23:50   ` [PATCH v3 2/8] MIPS: ranchu: Add " kbuild test robot
2017-07-24  2:14   ` kbuild test robot
2017-08-10 20:34   ` Alexandre Belloni
2017-08-11 16:46     ` Miodrag Dinic
2017-08-14 12:45       ` Aleksandar Markovic
2017-08-14 13:13         ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500656111-9520-3-git-send-email-aleksandar.markovic@rt-rk.com \
    --to=aleksandar.markovic@rt-rk.com \
    --cc=a.zummo@towertech.it \
    --cc=aleksandar.markovic@imgtec.com \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=bohu@google.com \
    --cc=davem@davemloft.net \
    --cc=douglas.leung@imgtec.com \
    --cc=goran.ferenc@imgtec.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=james.hogan@imgtec.com \
    --cc=jinqian@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=miodrag.dinic@imgtec.com \
    --cc=paul.burton@imgtec.com \
    --cc=petar.jovanovic@imgtec.com \
    --cc=raghu.gandham@imgtec.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox