[rtc-linux] Re: [PATCH v2 1/2] Documentation: bindings: add abracon,abx80x

[Philippe De Muyter <phdm@macqel.be>]

Hi Alexandre,

when I look into Documentation/devicetree/bindings/rtc, it seems that
all rtc but a few (mainly old ones) have the "-rtc" suffix in the
"compatible" property.

Would it not be better to keep it here also, like what I had written ?

Best regards

Philippe


On Wed, Apr 01, 2015 at 04:52:22AM +0200, Alexandre Belloni wrote:
> Document the bindings for abracon,abx80x and related compatibles.
> 
> Cc: devicetree-discuss@lists.ozlabs.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  .../devicetree/bindings/rtc/abracon,abx80x.txt     | 32 ++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> new file mode 100644
> index 000000000000..6f0d3b2cdd89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
> @@ -0,0 +1,32 @@
> +Abracon ABX80X I2C ultra low power RTC/Alarm chip
> +
> +The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
> +ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
> +is the superset of ab180x.
> +
> +Required properties:
> +
> + - "compatible": should one of:
> +        "abracon,abx80x"
> +        "abracon,ab0801"
> +        "abracon,ab0803"
> +        "abracon,ab0804"
> +        "abracon,ab0805"
> +        "abracon,ab1801"
> +        "abracon,ab1803"
> +        "abracon,ab1804"
> +        "abracon,ab1805"
> +	Using "abracon,abx80x" will enable chip autodetection.
> + - "reg": I2C bus address of the device
> +
> +Optional properties:
> +
> +The abx804 and abx805 have a trickle charger that is able to charge the
> +connected battery or supercap. Both the following properties have to be defined
> +and valid to enable charging:
> +
> + - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
> + - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
> +                          resistor, the other values are in ohm.
> +
> +
> -- 
> 2.1.0

-- 
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.