From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-wi0-f179.google.com (mail-wi0-f179.google.com. [209.85.212.179]) by gmr-mx.google.com with ESMTPS id q10si773617wiz.0.2015.04.29.03.54.20 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 29 Apr 2015 03:54:20 -0700 (PDT) Received: by wiun10 with SMTP id n10so61026842wiu.1 for ; Wed, 29 Apr 2015 03:54:20 -0700 (PDT) Date: Wed, 29 Apr 2015 11:54:15 +0100 From: Lee Jones To: S Twiss Cc: DEVICETREE , Ian Campbell , Kumar Gala , LINUXKERNEL , Mark Rutland , Pawel Moll , Rob Herring , Alessandro Zummo , David Dajun Chen , Dmitry Torokhov , LINUXINPUT , LINUXWATCHDOG , Liam Girdwood , Mark Brown , RTCLINUX , Samuel Ortiz , Support Opensource , Wim Van Sebroeck Subject: [rtc-linux] Re: [PATCH V1 6/6] devicetree: da9062: Add bindings for DA9062 driver Message-ID: <20150429105415.GX9169@x1> References: <94535acf974274822c5ac16d6427299778e11ccf.1429280614.git.stwiss.opensource@diasemi.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 In-Reply-To: <94535acf974274822c5ac16d6427299778e11ccf.1429280614.git.stwiss.opensource@diasemi.com> Reply-To: rtc-linux@googlegroups.com List-ID: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , On Fri, 17 Apr 2015, S Twiss wrote: > From: S Twiss >=20 > Add device tree bindings for the DA9062 driver >=20 > Signed-off-by: Steve Twiss >=20 > --- >=20 > This patch applies against linux-next and v4.0=20 >=20 >=20 >=20 > Documentation/devicetree/bindings/mfd/da9062.txt | 107 +++++++++++++++++= ++++++ > 1 file changed, 107 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt I don't see anything groundbreaking or offensive. Acked-by: Lee Jones > diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documenta= tion/devicetree/bindings/mfd/da9062.txt > new file mode 100644 > index 0000000..cf8f3f6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/da9062.txt > @@ -0,0 +1,107 @@ > +* Dialog DA9062 Power Management Integrated Circuit (PMIC) > + > +DA9062 consists of a large and varied group of sub-devices: > + > +Device Supply Names Description > +------ ------------ ----------- > +da9062-regulator : : LDOs & BUCKs > +da9062-onkey : : On Key > +da9062-rtc : : Real-Time Clock > +da9062-watchdog : : Watchdog Timer > + > +=3D=3D=3D=3D=3D=3D > + > +Required properties: > + > +- compatible : Should be "dlg,da9062". > +- reg : Specifies the I2C slave address (this defaults to 0x58 but it ca= n be > + modified to match the chip's OTP settings). > +- interrupt-parent : Specifies the reference to the interrupt controller= for > + the DA9062. > +- interrupts : IRQ line information. > +- interrupt-controller > + > +See Documentation/devicetree/bindings/interrupt-controller/interrupts.tx= t for > +further information on IRQ bindings. > + > +Sub-nodes: > + > +- regulators : This node defines the settings for the LDOs and BUCKs. Th= e > + DA9062 regulators are bound using their names listed below: > + > + buck1 : BUCK_1 > + buck2 : BUCK_2 > + buck3 : BUCK_3 > + buck4 : BUCK_4 > + ldo1 : LDO_1 > + ldo2 : LDO_2 > + ldo3 : LDO_3 > + ldo4 : LDO_4 > + > + The component follows the standard regulator framework and the binding= s > + details of individual regulator device can be found in: > + Documentation/devicetree/bindings/regulator/regulator.txt > + > + > +- rtc : This node defines settings required for the Real-Time Clock asso= ciated > + with the DA9062. There are currently no entries in this binding, howev= er > + compatible =3D "dlg,da9062-rtc" should be added if a node is created. > + > + > +- onkey : This node defines the OnKey settings for controlling the key > + functionality of the device. The node should contain the compatible pr= operty > + with the value "dlg,da9062-onkey". > + > + Optional onkey properties: > + > + - dlg,disable-key-power : Disable power-down using a long key-press. I= f this > + entry exists the OnKey driver will remove support for the KEY_POWER = key > + press. If this entry does not exist then by default the key-press > + triggered power down is enabled and the OnKey will support both KEY_= POWER > + and KEY_SLEEP. > + > +- watchdog: This node defines the settings for the watchdog driver assoc= iated > + with the DA9062 PMIC. The compatible =3D "dlg,da9062-watchdog" should = be added > + if a node is created. > + > + > +Example: > + > + pmic0: da9062@58 { > + compatible =3D "dlg,da9062"; > + reg =3D <0x58>; > + interrupt-parent =3D <&gpio6>; > + interrupts =3D <11 IRQ_TYPE_LEVEL_LOW>; > + interrupt-controller; > + > + rtc { > + compatible =3D "dlg,da9062-rtc"; > + }; > + > + onkey { > + compatible =3D "dlg,da9062-onkey"; > + dlg,disable-key-power; > + }; > + > + watchdog { > + compatible =3D "dlg,da9062-watchdog"; > + }; > + > + regulators { > + DA9062_BUCK1: buck1 { > + regulator-name =3D "BUCK1"; > + regulator-min-microvolt =3D <300000>; > + regulator-max-microvolt =3D <1570000>; > + regulator-min-microamp =3D <500000>; > + regulator-max-microamp =3D <2000000>; > + regulator-boot-on; > + }; > + DA9062_LDO1: ldo1 { > + regulator-name =3D "LDO_1"; > + regulator-min-microvolt =3D <900000>; > + regulator-max-microvolt =3D <3600000>; > + regulator-boot-on; > + }; > + }; > + }; > + --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog --=20 --=20 You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. ---=20 You received this message because you are subscribed to the Google Groups "= rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to rtc-linux+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.