From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Joshua Clayton <stillcompiling@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org
Subject: [rtc-linux] Re: [PATCH 5/9] rtc-pcf2123: put the chip reset into a function
Date: Wed, 25 Nov 2015 00:17:36 +0100 [thread overview]
Message-ID: <20151124231736.GF3950@piout.net> (raw)
In-Reply-To: <dd040a11817f2caac1db13ec49c64f603013b982.1446587705.git.stillcompiling@gmail.com>
On 04/11/2015 at 07:36:36 -0800, Joshua Clayton wrote :
A commit message, even when simple is mandatory.
> Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
> ---
> drivers/rtc/rtc-pcf2123.c | 64 ++++++++++++++++++++++++++---------------------
> 1 file changed, 36 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
> index 257ce7d..d3c1447 100644
> --- a/drivers/rtc/rtc-pcf2123.c
> +++ b/drivers/rtc/rtc-pcf2123.c
> @@ -260,6 +260,40 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
> return 0;
> }
>
> +static int pcf2123_reset(struct device *dev)
> +{
> + int ret;
> + u8 rxbuf[2];
> +
> + ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
> + if (ret < 0)
> + return ret;
> +
> + /* Stop the counter */
> + dev_dbg(dev, "stopping RTC\n");
> + ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
> + if (ret < 0)
> + return ret;
> +
> + /* See if the counter was actually stopped */
> + dev_dbg(dev, "checking for presence of RTC\n");
> + ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf));
> + if (ret < 0)
> + return ret;
> +
> + dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n",
> + rxbuf[0], rxbuf[1]);
This is not properly aligned (use checkpatch --strict)
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2015-11-24 23:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-04 15:36 [rtc-linux] [PATCH 0/9] rtc-2123: access the clock offset feature Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 1/9] rtc-pcf2123: Document all registers and useful bits Joshua Clayton
2015-11-24 21:51 ` [rtc-linux] " Alexandre Belloni
2015-12-01 18:13 ` Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 2/9] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 3/9] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2015-11-24 22:16 ` [rtc-linux] " Alexandre Belloni
2015-12-01 18:19 ` Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 4/9] rtc-pcf2123: replace magic numbers with defines Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 5/9] rtc-pcf2123: put the chip reset into a function Joshua Clayton
2015-11-24 23:17 ` Alexandre Belloni [this message]
2015-12-01 18:22 ` [rtc-linux] " Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 6/9] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2015-11-24 23:25 ` [rtc-linux] " Alexandre Belloni
2015-12-01 20:23 ` Joshua Clayton
2015-12-01 21:04 ` Alexandre Belloni
2015-11-04 15:36 ` [rtc-linux] [PATCH 7/9] rtc-pcf2123: allow sysfs to accept hexidecimal Joshua Clayton
2015-11-04 15:36 ` [rtc-linux] [PATCH 8/9] rtc-pcf2123: use sysfs groups Joshua Clayton
2015-11-18 23:52 ` [rtc-linux] " Joshua Clayton
2015-11-24 23:31 ` Alexandre Belloni
2015-12-01 20:28 ` Joshua Clayton
2015-12-01 20:47 ` Alexandre Belloni
2015-11-04 15:36 ` [rtc-linux] [PATCH 9/9] rtc-pcf2123: adjust the clock rate via sysfs Joshua Clayton
2015-11-18 23:51 ` [rtc-linux] " Joshua Clayton
2015-11-17 15:30 ` [rtc-linux] Re: [PATCH 0/9] rtc-2123: access the clock offset feature Joshua Clayton
2015-11-17 16:25 ` Alexandre Belloni
2015-11-19 0:25 ` Joshua Clayton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151124231736.GF3950@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=stillcompiling@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox