Linux RTC
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Joshua Clayton <stillcompiling@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org
Subject: [rtc-linux] Re: [PATCH v3 1/3] rtc: Add functions to set and read rtc offset
Date: Thu, 4 Feb 2016 23:07:54 +0100	[thread overview]
Message-ID: <20160204220754.GB4782@piout.net> (raw)
In-Reply-To: <1454519804-13770-1-git-send-email-stillcompiling@gmail.com>

Hi,

On 03/02/2016 at 09:16:42 -0800, Joshua Clayton wrote :
> diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
> index 5836751..c064eb9 100644
> --- a/drivers/rtc/interface.c
> +++ b/drivers/rtc/interface.c
> @@ -939,4 +939,61 @@ void rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer *timer)
>  	mutex_unlock(&rtc->ops_lock);
>  }
>  
> +/**
> + * rtc_read_offset - Read the amount of rtc offset in parts per billion
> + * @ rtc: rtc device to be used
> + * @ offset: the offset in parts per billion
> + *
> + * see below for details.
> + *
> + * Kernel interface to read rtc clock offset
> + * Returns 0 on success, or a negative number on error.
> + * If the rtc offset is not setable (or not implemented), return 0 and put
> + * 0 in the offset value;
> + */
> +int rtc_read_offset(struct rtc_device *rtc, long *offset)
> +{
> +	int ret = 0;
> +
> +	if (!rtc->ops)
> +		return -ENODEV;
> +
> +	if (!rtc->ops->set_offset) {
> +		*offset = 0;
> +		return 0;
> +	}
> +

I should have been clearer but this is not necessary anymore since the
sysfs interface will not always be present but you
should probably test rtc->ops->read_offset instead.

> +	mutex_lock(&rtc->ops_lock);
> +	ret = rtc->ops->read_offset(rtc->dev.parent, offset);
> +	mutex_unlock(&rtc->ops_lock);
> +	return ret;
> +}
>  
> +/**
> + * rtc_set_offset - Adjusts the duration of the average second
> + * @ rtc: rtc device to be used
> + * @ offset: the offset in parts per billion
> + *
> + * Some rtc's allow an adjustment to the average duration of a second
> + * to compensate for differences in the actual clock rate due to temperature,
> + * the crystal, capacitor, etc.
> + *
> + * Kernel interface to adjust an rtc clock offset.
> + * Return 0 on success, or a negative number on error.
> + * If the rtc offset is not setable (or not implemented), return -EINVAL
> + */
> +int rtc_set_offset(struct rtc_device *rtc, long offset)
> +{
> +	int ret = 0;
> +
> +	if (!rtc->ops)
> +		return -ENODEV;
> +
> +	if (!rtc->ops->set_offset)
> +		return -EINVAL;
> +
> +	mutex_lock(&rtc->ops_lock);
> +	ret = rtc->ops->set_offset(rtc->dev.parent, offset);
> +	mutex_unlock(&rtc->ops_lock);
> +	return ret;
> +}
> diff --git a/include/linux/rtc.h b/include/linux/rtc.h
> index 3359f04..b693ada 100644
> --- a/include/linux/rtc.h
> +++ b/include/linux/rtc.h
> @@ -89,6 +89,8 @@ struct rtc_class_ops {
>  	int (*set_mmss)(struct device *, unsigned long secs);
>  	int (*read_callback)(struct device *, int data);
>  	int (*alarm_irq_enable)(struct device *, unsigned int enabled);
> +	int (*read_offset)(struct device *, long *offset);
> +	int (*set_offset)(struct device *, long offset);
>  };
>  
>  #define RTC_DEVICE_NAME_SIZE 20
> @@ -208,6 +210,8 @@ void rtc_timer_init(struct rtc_timer *timer, void (*f)(void *p), void *data);
>  int rtc_timer_start(struct rtc_device *rtc, struct rtc_timer *timer,
>  		    ktime_t expires, ktime_t period);
>  void rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer *timer);
> +int rtc_read_offset(struct rtc_device *rtc, long *offset);
> +int rtc_set_offset(struct rtc_device *rtc, long offset);
>  void rtc_timer_do_work(struct work_struct *work);
>  
>  static inline bool is_leap_year(unsigned int year)
> -- 
> 2.5.0
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

  reply	other threads:[~2016-02-04 22:08 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-04 18:31 [rtc-linux] [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
     [not found] ` <0000-cover-letter.patch>
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 1/8] rtc-pcf2123: define registers and bit macros Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 2/8] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 4/8] rtc-pcf2123: refactor chip reset into a function Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 5/8] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 6/8] rtc: Add functions to set and read clock offset Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 7/8] rtc: implement a sysfs interface for " Joshua Clayton
2016-01-31 11:41     ` [rtc-linux] " Alexandre Belloni
2016-02-01 20:56       ` Joshua Clayton
2016-02-02 10:41         ` Alexandre Belloni
2016-02-03 17:16           ` [rtc-linux] [PATCH v3 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-04 22:07             ` Alexandre Belloni [this message]
2016-02-04 23:32               ` [rtc-linux] " Joshua Clayton
2016-02-05 14:39                 ` Alexandre Belloni
2016-02-05 20:41                   ` [rtc-linux] [PATCH v4 " Joshua Clayton
2016-02-05 20:41                     ` [rtc-linux] [PATCH v4 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-05 20:41                     ` [rtc-linux] [PATCH v4 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-23 18:47                     ` [rtc-linux] Re: [PATCH v4 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-23 21:44                       ` Alexandre Belloni
2016-02-03 17:16           ` [rtc-linux] [PATCH v3 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-04 22:12             ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [rtc-linux] [PATCH v3 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-01-04 18:31   ` [rtc-linux] [PATCH v2 8/8] " Joshua Clayton
2016-01-26 14:56 ` [rtc-linux] Re: [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-26 16:00   ` Alexandre Belloni
2016-01-31 11:29     ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160204220754.GB4782@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=a.zummo@towertech.it \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    --cc=stillcompiling@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox