Linux RTC
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: "Uwe Kleine-König" <uwe@kleine-koenig.org>
Cc: "Alessandro Zummo" <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, "Manuel Röder" <manuel_roeder@gmx.de>
Subject: [rtc-linux] Re: [PATCH v2 0/5] rtc: s35390a: allow shutdown of NAS after alarm triggered
Date: Fri, 8 Jul 2016 16:41:58 +0200	[thread overview]
Message-ID: <20160708144158.GL22202@piout.net> (raw)
In-Reply-To: <1467473292-26371-1-git-send-email-uwe@kleine-koenig.org>

On 02/07/2016 at 17:28:07 +0200, Uwe Kleine-K=C3=B6nig wrote :
> Hello,
>=20
> this is v2 of the series fixing https://bugs.debian.org/794266.
>=20
> The only change compared to (implicit) v1 is that reading out a disabled
> alarm is fixed. When the alarm is disabled the respective register is
> shadowed with the result is that the reported alarm time is 45:85:0
> because both hour and minute byte are read as 0xff and bcd2bin(0x3f) and
> bcd2bin(0x7f) are 45 and 85 respectively.
>=20
> The new behaviour is to only set .enabled =3D 0 and return. Not 100% sure
> this is the right thing, though. The only alternative is to enable alarm
> and read out a time, but that might have the side effect to trigger an
> unwanted alarm, so I didn't chose this way.
>=20
> Best regards
> Uwe
>=20
> Uwe Kleine-K=C3=B6nig (5):
>   rtc: s35390a: fix reading out alarm
>   rtc: s35390a: implement reset routine as suggested by the reference
>   rtc: s35390a: improve irq handling
>   rtc: s35390a: improve two comments in .set_alarm
>   rtc: fix a typo and reduce three empty lines to one
>=20
>  drivers/rtc/interface.c   |   4 +-
>  drivers/rtc/rtc-s35390a.c | 157 +++++++++++++++++++++++++++++++++++-----=
------
>  2 files changed, 120 insertions(+), 41 deletions(-)
>=20

All applied, thanks!


I added a quick commit message in 4/5.

--=20
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

      parent reply	other threads:[~2016-07-08 14:41 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-02 15:28 [rtc-linux] [PATCH v2 0/5] rtc: s35390a: allow shutdown of NAS after alarm triggered Uwe Kleine-König
2016-07-02 15:28 ` [rtc-linux] [PATCH v2 1/5] rtc: s35390a: fix reading out alarm Uwe Kleine-König
2016-07-02 15:28 ` [rtc-linux] [PATCH v2 2/5] rtc: s35390a: implement reset routine as suggested by the reference Uwe Kleine-König
2016-07-02 15:28 ` [rtc-linux] [PATCH v2 3/5] rtc: s35390a: improve irq handling Uwe Kleine-König
2016-07-02 15:28 ` [rtc-linux] [PATCH v2 4/5] rtc: s35390a: improve two comments in .set_alarm Uwe Kleine-König
2016-07-02 15:28 ` [rtc-linux] [PATCH v2 5/5] rtc: fix a typo and reduce three empty lines to one Uwe Kleine-König
2016-07-08 14:41 ` Alexandre Belloni [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160708144158.GL22202@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=a.zummo@towertech.it \
    --cc=manuel_roeder@gmx.de \
    --cc=rtc-linux@googlegroups.com \
    --cc=uwe@kleine-koenig.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox