[rtc-linux] [PATCH] rtc: ds1307: Add support for Epson RX8130CE

[Marek Vasut <marex@denx.de>]

Add support for yet another RTC chip, Epson RX8130CE. This time around,
the chip has slightly permutated registers and also the register starts
at 0x10 instead of 0x0 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
---
 drivers/rtc/rtc-ds1307.c | 179 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 179 insertions(+)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 77339b3d50a1..4a3c41c9e040 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -43,6 +43,7 @@ enum ds_type {
 	m41t00,
 	mcp794xx,
 	rx_8025,
+	rx_8130,
 	last_ds_type /* always last */
 	/* rs5c372 too?  different address... */
 };
@@ -169,6 +170,12 @@ static struct chip_desc chips[last_ds_type] = {
 	[ds_3231] = {
 		.alarm		= 1,
 	},
+	[rx_8130] = {
+		.alarm		= 1,
+		/* this is battery backed SRAM */
+		.nvram_offset	= 0x20,
+		.nvram_size	= 4,	/* 32bit (4 word x 8 bit) */
+	},
 	[mcp794xx] = {
 		.alarm		= 1,
 		/* this is battery backed SRAM */
@@ -192,6 +199,7 @@ static const struct i2c_device_id ds1307_id[] = {
 	{ "pt7c4338", ds_1307 },
 	{ "rx8025", rx_8025 },
 	{ "isl12057", ds_1337 },
+	{ "rx8130", rx_8130 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ds1307_id);
@@ -729,6 +737,169 @@ static const struct rtc_class_ops ds13xx_rtc_ops = {
 /*----------------------------------------------------------------------*/
 
 /*
+ * Alarm support for rx8130 devices.
+ */
+
+#define RX8130_REG_ALARM_MIN		0x07
+#define RX8130_REG_ALARM_HOUR		0x08
+#define RX8130_REG_ALARM_WEEK_OR_DAY	0x09
+#define RX8130_REG_EXTENSION		0x0c
+#define RX8130_REG_EXTENSION_WADA	(1 << 3)
+#define RX8130_REG_FLAG			0x0d
+#define RX8130_REG_FLAG_AF		(1 << 3)
+#define RX8130_REG_CONTROL0		0x0e
+#define RX8130_REG_CONTROL0_AIE		(1 << 3)
+
+static irqreturn_t rx8130_irq(int irq, void *dev_id)
+{
+	struct i2c_client       *client = dev_id;
+	struct ds1307           *ds1307 = i2c_get_clientdata(client);
+	struct mutex            *lock = &ds1307->rtc->ops_lock;
+	u8 ctl[3];
+	int ret;
+
+	mutex_lock(lock);
+
+	/* Read control registers. */
+	ret = ds1307->read_block_data(client, RX8130_REG_EXTENSION, 3, ctl);
+	if (ret < 0)
+		goto out;
+	if (!(ctl[1] & RX8130_REG_FLAG_AF))
+		goto out;
+	ctl[1] &= ~RX8130_REG_FLAG_AF;
+	ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+	ret = ds1307->write_block_data(client, RX8130_REG_EXTENSION, 3, ctl);
+	if (ret < 0)
+		goto out;
+
+	rtc_update_irq(ds1307->rtc, 1, RTC_AF | RTC_IRQF);
+
+out:
+	mutex_unlock(lock);
+
+	return IRQ_HANDLED;
+}
+
+static int rx8130_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1307 *ds1307 = i2c_get_clientdata(client);
+	u8 ald[3], ctl[3];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	/* Read alarm registers. */
+	ret = ds1307->read_block_data(client, RX8130_REG_ALARM_MIN, 3, ald);
+	if (ret < 0)
+		return ret;
+
+	/* Read control registers. */
+	ret = ds1307->read_block_data(client, RX8130_REG_EXTENSION, 3, ctl);
+	if (ret < 0)
+		return ret;
+
+	t->enabled = !!(ctl[2] & RX8130_REG_CONTROL0_AIE);
+	t->pending = !!(ctl[1] & RX8130_REG_FLAG_AF);
+
+	/* Report alarm 0 time assuming 24-hour and day-of-month modes. */
+	t->time.tm_sec = -1;
+	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
+	t->time.tm_hour = bcd2bin(ald[1] & 0x7f);
+	t->time.tm_wday = -1;
+	t->time.tm_mday = bcd2bin(ald[2] & 0x7f);
+	t->time.tm_mon = -1;
+	t->time.tm_year = -1;
+	t->time.tm_yday = -1;
+	t->time.tm_isdst = -1;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d enabled=%d\n",
+		__func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon, t->enabled);
+
+	return 0;
+}
+
+static int rx8130_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1307 *ds1307 = i2c_get_clientdata(client);
+	u8 ald[3], ctl[3];
+	int ret;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d "
+		"enabled=%d pending=%d\n", __func__,
+		t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
+		t->time.tm_wday, t->time.tm_mday, t->time.tm_mon,
+		t->enabled, t->pending);
+
+	/* Read control registers. */
+	ret = ds1307->read_block_data(client, RX8130_REG_EXTENSION, 3, ctl);
+	if (ret < 0)
+		return ret;
+
+	ctl[0] &= ~RX8130_REG_EXTENSION_WADA;
+	ctl[1] |= RX8130_REG_FLAG_AF;
+	ctl[2] &= ~RX8130_REG_CONTROL0_AIE;
+
+	ret = ds1307->write_block_data(client, RX8130_REG_EXTENSION, 3, ctl);
+	if (ret < 0)
+		return ret;
+
+	/* Hardware alarm precision is 1 minute! */
+	ald[0] = bin2bcd(t->time.tm_min);
+	ald[1] = bin2bcd(t->time.tm_hour);
+	ald[2] = bin2bcd(t->time.tm_mday);
+
+	ret = ds1307->write_block_data(client, RX8130_REG_ALARM_MIN, 3, ald);
+	if (ret < 0)
+		return ret;
+
+	if (!t->enabled)
+		return 0;
+
+	ctl[2] |= RX8130_REG_CONTROL0_AIE;
+
+	return ds1307->write_block_data(client, RX8130_REG_EXTENSION, 3, ctl);
+}
+
+static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds1307 *ds1307 = i2c_get_clientdata(client);
+	int reg;
+
+	if (!test_bit(HAS_ALARM, &ds1307->flags))
+		return -EINVAL;
+
+	reg = i2c_smbus_read_byte_data(client, RX8130_REG_CONTROL0);
+	if (reg < 0)
+		return reg;
+
+	if (enabled)
+		reg |= RX8130_REG_CONTROL0_AIE;
+	else
+		reg &= ~RX8130_REG_CONTROL0_AIE;
+
+	return i2c_smbus_write_byte_data(client, RX8130_REG_CONTROL0, reg);
+}
+
+static const struct rtc_class_ops rx8130_rtc_ops = {
+	.read_time	= ds1307_get_time,
+	.set_time	= ds1307_set_time,
+	.read_alarm	= rx8130_read_alarm,
+	.set_alarm	= rx8130_set_alarm,
+	.alarm_irq_enable = rx8130_alarm_irq_enable,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
  * Alarm support for mcp794xx devices.
  */
 
@@ -1562,6 +1733,14 @@ static int ds1307_probe(struct i2c_client *client,
 						  hour);
 		}
 		break;
+	case rx_8130:
+		ds1307->offset = 0x10; /* Seconds starts at 0x10 */
+		rtc_ops = &rx8130_rtc_ops;
+		if (ds1307->client->irq > 0 && chip->alarm) {
+			irq_handler = rx8130_irq;
+			want_irq = true;
+		}
+		break;
 	case ds_1388:
 		ds1307->offset = 1; /* Seconds starts at 1 */
 		break;
-- 
2.11.0

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.