[PATCH 0/4] da9063: convert to SPDX

[PATCH 0/4] da9063: convert to SPDX

[Wolfram Sang]

When working with this driver while debugging something else, I noticed a typo
in one of the file headers and decided that it could be converted to SPDX while
I am at it anyhow.

These patches were "tested" on a Renesas Lager board (R-Car H2). No regressions
encountered. buildbot was happy, too.

The patches are based on v5.1-rc1. I'd think they can be picked up per
subsystem but am also fine with everything going via MFD. There is no
dependency or merge conflict with my platform_data removal series which I sent
a few minutes ago.

Looking forward to comments!

   Wolfram




Wolfram Sang (4):
  mfd: da9063: convert headers to SPDX
  regulator: da9063: convert header to SPDX
  input: da9063_onkey: convert header to SPDX
  rtc: da9063: convert header to SPDX

 drivers/input/misc/da9063_onkey.c    | 11 +----------
 drivers/mfd/da9063-core.c            |  8 ++------
 drivers/mfd/da9063-i2c.c             |  9 ++-------
 drivers/mfd/da9063-irq.c             |  9 ++-------
 drivers/regulator/da9063-regulator.c |  8 +-------
 drivers/rtc/rtc-da9063.c             | 14 +++-----------
 include/linux/mfd/da9063/core.h      |  7 +------
 include/linux/mfd/da9063/registers.h |  7 +------
 8 files changed, 13 insertions(+), 60 deletions(-)

-- 
2.11.0

[PATCH 4/4] rtc: da9063: convert header to SPDX

[Wolfram Sang]

Covnert the header of the source file to SPDX.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/rtc/rtc-da9063.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index b4e054c64bad..73b38d207d7e 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -1,15 +1,7 @@
-/* rtc-da9063.c - Real time clock device driver for DA9063
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Real time clock device driver for DA9063
  * Copyright (C) 2013-2015  Dialog Semiconductor Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
-- 
2.11.0

Re: [PATCH 4/4] rtc: da9063: convert header to SPDX

[Simon Horman]

On Mon, Mar 18, 2019 at 04:57:27PM +0100, Wolfram Sang wrote:
> Covnert the header of the source file to SPDX.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> ---
>  drivers/rtc/rtc-da9063.c | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
> index b4e054c64bad..73b38d207d7e 100644
> --- a/drivers/rtc/rtc-da9063.c
> +++ b/drivers/rtc/rtc-da9063.c
> @@ -1,15 +1,7 @@
> -/* rtc-da9063.c - Real time clock device driver for DA9063
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Real time clock device driver for DA9063
>   * Copyright (C) 2013-2015  Dialog Semiconductor Ltd.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License
> - * as published by the Free Software Foundation; either version 2
> - * of the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> - * GNU General Public License for more details.
>   */
>  
>  #include <linux/delay.h>
> -- 
> 2.11.0
> 

Re: [PATCH 4/4] rtc: da9063: convert header to SPDX

[Alexandre Belloni]

On 18/03/2019 16:57:27+0100, Wolfram Sang wrote:
> Covnert the header of the source file to SPDX.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>  drivers/rtc/rtc-da9063.c | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
> 
Applied, thanks.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com