[PATCH AUTOSEL 4.4 02/15] rtc: sh: Fix invalid alarm warning for non-enabled alarm

[PATCH AUTOSEL 4.4 02/15] rtc: sh: Fix invalid alarm warning for non-enabled alarm

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]

When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled.  __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.

Fix this by returning -1 instead, as this value is handled fine for all
fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-sh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 2b81dd4baf17..104c854d6a8a 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -455,7 +455,7 @@ static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
 static inline int sh_rtc_read_alarm_value(struct sh_rtc *rtc, int reg_off)
 {
 	unsigned int byte;
-	int value = 0xff;	/* return 0xff for ignored values */
+	int value = -1;			/* return -1 for ignored values */
 
 	byte = readb(rtc->regbase + reg_off);
 	if (byte & AR_ENB) {
-- 
2.19.1

[PATCH AUTOSEL 4.4 07/15] rtc: da9063: set uie_unsupported when relevant

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit 882c5e552ffd06856de42261460f46e18319d259 ]

The DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-da9063.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
index d6c853bbfa9f..e93beecd5010 100644
--- a/drivers/rtc/rtc-da9063.c
+++ b/drivers/rtc/rtc-da9063.c
@@ -491,6 +491,13 @@ static int da9063_rtc_probe(struct platform_device *pdev)
 	da9063_data_to_tm(data, &rtc->alarm_time, rtc);
 	rtc->rtc_sync = false;
 
+	/*
+	 * TODO: some models have alarms on a minute boundary but still support
+	 * real hardware interrupts. Add this once the core supports it.
+	 */
+	if (config->rtc_data_start != RTC_SEC)
+		rtc->rtc_dev->uie_unsupported = 1;
+
 	irq_alarm = platform_get_irq_byname(pdev, "ALARM");
 	ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL,
 					da9063_alarm_event,
-- 
2.19.1