[PATCH AUTOSEL 5.5 116/542] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed

[PATCH AUTOSEL 5.5 116/542] rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 34719de919af07682861cb0fa2bcf64da33ecf44 ]

Merely enabling I2C and RTC selects REGMAP_I2C and REGMAP_SPI, even when
no driver needs it.  While the former can be moduler, the latter cannot,
and thus becomes built-in.

Fix this by moving the select statements for REGMAP_I2C and REGMAP_SPI
from the RTC_I2C_AND_SPI helper to the individual drivers that depend on
it.

Note that the comment for RTC_I2C_AND_SPI refers to SND_SOC_I2C_AND_SPI
for more information, but the latter does not select REGMAP_{I2C,SPI}
itself, and defers that to the individual drivers, too.

Fixes: 080481f54ef62121 ("rtc: merge ds3232 and ds3234")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200112171349.22268-1-geert@linux-m68k.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index d77515d8382c7..738fa07188409 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -848,14 +848,14 @@ config RTC_I2C_AND_SPI
 	default m if I2C=m
 	default y if I2C=y
 	default y if SPI_MASTER=y
-	select REGMAP_I2C if I2C
-	select REGMAP_SPI if SPI_MASTER
 
 comment "SPI and I2C RTC drivers"
 
 config RTC_DRV_DS3232
 	tristate "Dallas/Maxim DS3232/DS3234"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for Dallas Semiconductor
 	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
@@ -875,6 +875,8 @@ config RTC_DRV_DS3232_HWMON
 config RTC_DRV_PCF2127
 	tristate "NXP PCF2127"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	select WATCHDOG_CORE if WATCHDOG
 	help
 	  If you say yes here you get support for the NXP PCF2127/29 RTC
@@ -891,6 +893,8 @@ config RTC_DRV_PCF2127
 config RTC_DRV_RV3029C2
 	tristate "Micro Crystal RV3029/3049"
 	depends on RTC_I2C_AND_SPI
+	select REGMAP_I2C if I2C
+	select REGMAP_SPI if SPI_MASTER
 	help
 	  If you say yes here you get support for the Micro Crystal
 	  RV3029 and RV3049 RTC chips.
-- 
2.20.1

[PATCH AUTOSEL 5.5 252/542] rtc: hym8563: Return -EINVAL if the time is known to be invalid

[Sasha Levin]

From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

[ Upstream commit f236a2a2ebabad0848ad0995af7ad1dc7029e895 ]

The current code returns -EPERM when the voltage loss bit is set.
Since the bit indicates that the time value is not valid, return
-EINVAL instead, which is the appropriate error code for this
situation.

Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20191212153111.966923-1-paul.kocialkowski@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-hym8563.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c
index 443f6d05ce29c..fb6d7967ec006 100644
--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@@ -97,7 +97,7 @@ static int hym8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 	if (!hym8563->valid) {
 		dev_warn(&client->dev, "no valid clock/calendar values available\n");
-		return -EPERM;
+		return -EINVAL;
 	}
 
 	ret = i2c_smbus_read_i2c_block_data(client, HYM8563_SEC, 7, buf);
-- 
2.20.1