From: Laurent Vivier <laurent@vivier.eu>
To: linux-kernel@vger.kernel.org
Cc: Alessandro Zummo <a.zummo@towertech.it>,
linux-rtc@vger.kernel.org, John Stultz <john.stultz@linaro.org>,
Arnd Bergmann <arnd@arndb.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
linux-m68k@lists.linux-m68k.org,
Thomas Gleixner <tglx@linutronix.de>,
Stephen Boyd <sboyd@kernel.org>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Laurent Vivier <laurent@vivier.eu>
Subject: [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32()
Date: Thu, 20 Jan 2022 09:03:44 +0100 [thread overview]
Message-ID: <20220120080347.1595379-3-laurent@vivier.eu> (raw)
In-Reply-To: <20220120080347.1595379-1-laurent@vivier.eu>
Revert
commit da31de35cd2f ("tty: goldfish: use __raw_writel()/__raw_readl()")
to use accessors defined by the architecture.
Define by default the accessor to be little-endian as we
have only little-endian architectures using goldfish devices.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
drivers/tty/goldfish.c | 20 ++++++++++----------
include/linux/goldfish.h | 15 +++++++++++----
2 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 5ed19a9857ad..10c13b93ed52 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -61,13 +61,13 @@ static void do_rw_io(struct goldfish_tty *qtty,
spin_lock_irqsave(&qtty->lock, irq_flags);
gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR,
base + GOLDFISH_TTY_REG_DATA_PTR_HIGH);
- __raw_writel(count, base + GOLDFISH_TTY_REG_DATA_LEN);
+ gf_iowrite32(count, base + GOLDFISH_TTY_REG_DATA_LEN);
if (is_write)
- __raw_writel(GOLDFISH_TTY_CMD_WRITE_BUFFER,
+ gf_iowrite32(GOLDFISH_TTY_CMD_WRITE_BUFFER,
base + GOLDFISH_TTY_REG_CMD);
else
- __raw_writel(GOLDFISH_TTY_CMD_READ_BUFFER,
+ gf_iowrite32(GOLDFISH_TTY_CMD_READ_BUFFER,
base + GOLDFISH_TTY_REG_CMD);
spin_unlock_irqrestore(&qtty->lock, irq_flags);
@@ -142,7 +142,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id)
unsigned char *buf;
u32 count;
- count = __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+ count = gf_ioread32(base + GOLDFISH_TTY_REG_BYTES_READY);
if (count == 0)
return IRQ_NONE;
@@ -159,7 +159,7 @@ static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- __raw_writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
return 0;
}
@@ -167,7 +167,7 @@ static void goldfish_tty_shutdown(struct tty_port *port)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
}
static int goldfish_tty_open(struct tty_struct *tty, struct file *filp)
@@ -202,7 +202,7 @@ static unsigned int goldfish_tty_chars_in_buffer(struct tty_struct *tty)
{
struct goldfish_tty *qtty = &goldfish_ttys[tty->index];
void __iomem *base = qtty->base;
- return __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+ return gf_ioread32(base + GOLDFISH_TTY_REG_BYTES_READY);
}
static void goldfish_tty_console_write(struct console *co, const char *b,
@@ -355,7 +355,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
* on Ranchu emulator (qemu2) returns 1 here and
* driver will use physical addresses.
*/
- qtty->version = __raw_readl(base + GOLDFISH_TTY_REG_VERSION);
+ qtty->version = gf_ioread32(base + GOLDFISH_TTY_REG_VERSION);
/*
* Goldfish TTY device on Ranchu emulator (qemu2)
@@ -374,7 +374,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
}
}
- __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED,
"goldfish_tty", qtty);
@@ -436,7 +436,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
static void gf_early_console_putchar(struct uart_port *port, int ch)
{
- __raw_writel(ch, port->membase);
+ gf_iowrite32(ch, port->membase);
}
static void gf_early_write(struct console *con, const char *s, unsigned int n)
diff --git a/include/linux/goldfish.h b/include/linux/goldfish.h
index 12be1601fd84..bcc17f95b906 100644
--- a/include/linux/goldfish.h
+++ b/include/linux/goldfish.h
@@ -8,14 +8,21 @@
/* Helpers for Goldfish virtual platform */
+#ifndef gf_ioread32
+#define gf_ioread32 ioread32
+#endif
+#ifndef gf_iowrite32
+#define gf_iowrite32 iowrite32
+#endif
+
static inline void gf_write_ptr(const void *ptr, void __iomem *portl,
void __iomem *porth)
{
const unsigned long addr = (unsigned long)ptr;
- __raw_writel(lower_32_bits(addr), portl);
+ gf_iowrite32(lower_32_bits(addr), portl);
#ifdef CONFIG_64BIT
- __raw_writel(upper_32_bits(addr), porth);
+ gf_iowrite32(upper_32_bits(addr), porth);
#endif
}
@@ -23,9 +30,9 @@ static inline void gf_write_dma_addr(const dma_addr_t addr,
void __iomem *portl,
void __iomem *porth)
{
- __raw_writel(lower_32_bits(addr), portl);
+ gf_iowrite32(lower_32_bits(addr), portl);
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
- __raw_writel(upper_32_bits(addr), porth);
+ gf_iowrite32(upper_32_bits(addr), porth);
#endif
}
--
2.34.1
next prev parent reply other threads:[~2022-01-20 8:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 1/5] m68k: add asm/config.h Laurent Vivier
2022-01-20 8:03 ` Laurent Vivier [this message]
2022-01-20 8:50 ` [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32() Arnd Bergmann
2022-01-20 17:09 ` Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32() Laurent Vivier
2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
2022-01-20 8:03 ` [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource Laurent Vivier
2022-01-21 12:23 ` kernel test robot
2022-01-20 8:03 ` [PATCH v11 5/5] m68k: introduce a virtual m68k machine Laurent Vivier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220120080347.1595379-3-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=daniel.lezcano@linaro.org \
--cc=geert@linux-m68k.org \
--cc=jiaxun.yang@flygoat.com \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-rtc@vger.kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).