[PATCH v3 1/1] dt-bindings: rtc: nxp,pcf85063: Convert to DT schema

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Convert the NXP PCF85063 RTC binding to DT schema format.

Add 'interrupts' and 'wakeup-source' as this device has an interrupt
which was not documented, but is in use.
'clock-output-names' and '#clock-cells' are added as well, those were
probably missed when adding clkout support in commit 8c229ab6048b
("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Krzysztof, thanks for your review.

Changes in v3:
* Added constraints for rv8263 & pcf85063 regarding 'quartz-load-femtofarads'
* Fixed example

I have to admit I could not actually verify in the registers that pcf85063 is
limited to 7pF. I was not able to find any datasheet containg the registers,
only a product brief [1] indicating this limit.

Changes in v2:
* Sorted compatible list
* Mentioned new #clock-cells and clock-output-names properties in commit message
* Removed 'interrupt-names', not needed/used anyway
* Fixed quartz-load-femtofarads defintion/description

[1] https://www.mouser.de/pdfDocs/NXP_PCF85063_PB.pdf

 .../devicetree/bindings/rtc/nxp,pcf85063.txt  | 32 -------
 .../devicetree/bindings/rtc/nxp,pcf85063.yaml | 92 +++++++++++++++++++
 2 files changed, 92 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml

diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
deleted file mode 100644
index 217b7cd06c11..000000000000
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* NXP PCF85063 Real Time Clock
-
-Required properties:
-- compatible: Should one of contain:
-	"nxp,pca85073a",
-	"nxp,pcf85063",
-	"nxp,pcf85063a",
-	"nxp,pcf85063tp",
-	"microcrystal,rv8263"
-- reg: I2C address for chip.
-
-Optional property:
-- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
-  expressed in femto Farad (fF). Valid values are 7000 and 12500.
-  Default value (if no value is specified) is 7000fF.
-
-Optional child node:
-- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
-
-Example:
-
-pcf85063: rtc@51 {
-	compatible = "nxp,pcf85063";
-	reg = <0x51>;
-	quartz-load-femtofarads = <12500>;
-
-		clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
new file mode 100644
index 000000000000..2f892f8640d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF85063 Real Time Clock
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+properties:
+  compatible:
+    enum:
+      - microcrystal,rv8263
+      - nxp,pcf85063
+      - nxp,pcf85063a
+      - nxp,pcf85063tp
+      - nxp,pca85073a
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [7000, 12500]
+    default: 7000
+
+  clock:
+    $ref: /schemas/clock/fixed-clock.yaml
+    description:
+      Provide this if the square wave pin is used as boot-enabled
+      fixed clock.
+
+  wakeup-source: true
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microcrystal,rv8263
+    then:
+      properties:
+        quartz-load-femtofarads: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pcf85063
+    then:
+      properties:
+        quartz-load-femtofarads:
+          const: 7000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+          compatible = "nxp,pcf85063a";
+          reg = <0x51>;
+          quartz-load-femtofarads = <12500>;
+
+          clock {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <32768>;
+          };
+        };
+      };
-- 
2.25.1