linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/1] rtc: use devm_clk_get_enabled() in mv_rtc_probe()
@ 2023-07-20 14:08 Yuanjun Gong
  2023-08-10  8:17 ` Alexandre Belloni
  0 siblings, 1 reply; 2+ messages in thread
From: Yuanjun Gong @ 2023-07-20 14:08 UTC (permalink / raw)
  To: Alessandro Zummo, Alexandre Belloni, linux-rtc; +Cc: Yuanjun Gong

in mv_rtc_probe(), the return value of function
clk_prepare_enable() should be checked, since it may fail.
using devm_clk_get_enabled() instead of devm_clk_get() and
clk_prepare_enable() can avoid this problem.

Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
---
 drivers/rtc/rtc-mv.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 6c526e2ec56d..8cd33721be03 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -219,17 +219,16 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
 	if (IS_ERR(pdata->ioaddr))
 		return PTR_ERR(pdata->ioaddr);
 
-	pdata->clk = devm_clk_get(&pdev->dev, NULL);
+	pdata->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	/* Not all SoCs require a clock.*/
-	if (!IS_ERR(pdata->clk))
-		clk_prepare_enable(pdata->clk);
+	if (IS_ERR(pdata->clk))
+		return PTR_ERR(pdata->clk);
 
 	/* make sure the 24 hour mode is enabled */
 	rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
 	if (rtc_time & RTC_HOURS_12H_MODE) {
 		dev_err(&pdev->dev, "12 Hour mode is enabled but not supported.\n");
-		ret = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	/* make sure it is actually functional */
@@ -238,8 +237,7 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
 		rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
 		if (rtc_time == 0x01000000) {
 			dev_err(&pdev->dev, "internal RTC not ticking\n");
-			ret = -ENODEV;
-			goto out;
+			return -ENODEV;
 		}
 	}
 
@@ -249,8 +247,7 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
 
 	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(pdata->rtc)) {
-		ret = PTR_ERR(pdata->rtc);
-		goto out;
+		return PTR_ERR(pdata->rtc);
 	}
 
 	if (pdata->irq >= 0) {
@@ -275,11 +272,6 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
 	ret = devm_rtc_register_device(pdata->rtc);
 	if (!ret)
 		return 0;
-out:
-	if (!IS_ERR(pdata->clk))
-		clk_disable_unprepare(pdata->clk);
-
-	return ret;
 }
 
 static int __exit mv_rtc_remove(struct platform_device *pdev)
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH 1/1] rtc: use devm_clk_get_enabled() in mv_rtc_probe()
  2023-07-20 14:08 [PATCH 1/1] rtc: use devm_clk_get_enabled() in mv_rtc_probe() Yuanjun Gong
@ 2023-08-10  8:17 ` Alexandre Belloni
  0 siblings, 0 replies; 2+ messages in thread
From: Alexandre Belloni @ 2023-08-10  8:17 UTC (permalink / raw)
  To: Yuanjun Gong; +Cc: Alessandro Zummo, linux-rtc

On 20/07/2023 22:08:14+0800, Yuanjun Gong wrote:
> in mv_rtc_probe(), the return value of function
> clk_prepare_enable() should be checked, since it may fail.
> using devm_clk_get_enabled() instead of devm_clk_get() and
> clk_prepare_enable() can avoid this problem.
> 
> Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
> ---
>  drivers/rtc/rtc-mv.c | 20 ++++++--------------
>  1 file changed, 6 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
> index 6c526e2ec56d..8cd33721be03 100644
> --- a/drivers/rtc/rtc-mv.c
> +++ b/drivers/rtc/rtc-mv.c
> @@ -219,17 +219,16 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
>  	if (IS_ERR(pdata->ioaddr))
>  		return PTR_ERR(pdata->ioaddr);
>  
> -	pdata->clk = devm_clk_get(&pdev->dev, NULL);
> +	pdata->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>  	/* Not all SoCs require a clock.*/
> -	if (!IS_ERR(pdata->clk))
> -		clk_prepare_enable(pdata->clk);
> +	if (IS_ERR(pdata->clk))
> +		return PTR_ERR(pdata->clk);

Look at the comment, "Not all SoCs require a clock.", you are breaking
the driver for multiple platforms.

>  
>  	/* make sure the 24 hour mode is enabled */
>  	rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
>  	if (rtc_time & RTC_HOURS_12H_MODE) {
>  		dev_err(&pdev->dev, "12 Hour mode is enabled but not supported.\n");
> -		ret = -EINVAL;
> -		goto out;
> +		return -EINVAL;
>  	}
>  
>  	/* make sure it is actually functional */
> @@ -238,8 +237,7 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
>  		rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
>  		if (rtc_time == 0x01000000) {
>  			dev_err(&pdev->dev, "internal RTC not ticking\n");
> -			ret = -ENODEV;
> -			goto out;
> +			return -ENODEV;
>  		}
>  	}
>  
> @@ -249,8 +247,7 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
>  
>  	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
>  	if (IS_ERR(pdata->rtc)) {
> -		ret = PTR_ERR(pdata->rtc);
> -		goto out;
> +		return PTR_ERR(pdata->rtc);
>  	}
>  
>  	if (pdata->irq >= 0) {
> @@ -275,11 +272,6 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
>  	ret = devm_rtc_register_device(pdata->rtc);
>  	if (!ret)
>  		return 0;
> -out:
> -	if (!IS_ERR(pdata->clk))
> -		clk_disable_unprepare(pdata->clk);
> -
> -	return ret;
>  }
>  
>  static int __exit mv_rtc_remove(struct platform_device *pdev)
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-08-10  8:17 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-20 14:08 [PATCH 1/1] rtc: use devm_clk_get_enabled() in mv_rtc_probe() Yuanjun Gong
2023-08-10  8:17 ` Alexandre Belloni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).