From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Mike Looijmans <mike.looijmans@topic.nl>
Cc: linux-rtc@vger.kernel.org,
Alessandro Zummo <a.zummo@towertech.it>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] rtc: pcf85363: Allow to wake up system without IRQ
Date: Wed, 16 Aug 2023 23:40:17 +0200 [thread overview]
Message-ID: <202308162140170c067ce7@mail.local> (raw)
In-Reply-To: <20230502055458.11004-1-mike.looijmans@topic.nl>
Hello Mike,
Sorry for the very late review, there is a small change that is needed:
On 02/05/2023 07:54:58+0200, Mike Looijmans wrote:
> When wakeup-source is set in the devicetree, set up the device for
> using the output as interrupt instead of clock. This is similar to
> how other RTC devices handle this.
>
> This allows the clock chip to turn on the board when wired to do
> so in hardware.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>
> ---
>
> drivers/rtc/rtc-pcf85363.c | 17 ++++++++++-------
> 1 file changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c
> index 8958eadf1c3e..b1543bcdc530 100644
> --- a/drivers/rtc/rtc-pcf85363.c
> +++ b/drivers/rtc/rtc-pcf85363.c
> @@ -434,23 +434,26 @@ static int pcf85363_probe(struct i2c_client *client)
> pcf85363->rtc->range_max = RTC_TIMESTAMP_END_2099;
> clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
>
> + if (client->irq > 0 || device_property_read_bool(&client->dev,
> + "wakeup-source")) {
> + regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
> + regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
> + PIN_IO_INTA_OUT, PIN_IO_INTAPM);
> + device_init_wakeup(&client->dev, true);
> + set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
This should not be done when devm_request_threaded_irq fails.
> + }
> +
> if (client->irq > 0) {
> unsigned long irqflags = IRQF_TRIGGER_LOW;
>
> if (dev_fwnode(&client->dev))
> irqflags = 0;
> -
> - regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
> - regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
> - PIN_IO_INTA_OUT, PIN_IO_INTAPM);
> ret = devm_request_threaded_irq(&client->dev, client->irq,
> NULL, pcf85363_rtc_handle_irq,
> irqflags | IRQF_ONESHOT,
> "pcf85363", client);
> if (ret)
> - dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
> - else
> - set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
> + dev_warn(&client->dev, "unable to request IRQ, alarm not functional\n");
> }
>
> ret = devm_rtc_register_device(pcf85363->rtc);
> --
> 2.17.1
>
>
> Met vriendelijke groet / kind regards,
>
> Mike Looijmans
> System Expert
>
>
> TOPIC Embedded Products B.V.
> Materiaalweg 4, 5681 RJ Best
> The Netherlands
>
> T: +31 (0) 499 33 69 69
> E: mike.looijmans@topicproducts.com
> W: www.topic.nl
>
> Please consider the environment before printing this e-mail
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2023-08-16 21:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.eeedf5db-4013-4c3b-be1c-1121df58f897@emailsignatures365.codetwo.com>
2023-05-02 5:54 ` [PATCH] rtc: pcf85363: Allow to wake up system without IRQ Mike Looijmans
2023-08-16 21:40 ` Alexandre Belloni [this message]
2023-08-17 5:42 ` Mike Looijmans
2023-08-17 8:17 ` Alexandre Belloni
2023-08-17 9:02 ` Mike Looijmans
2023-08-17 22:25 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202308162140170c067ce7@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=a.zummo@towertech.it \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mike.looijmans@topic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).