[PATCH v11 0/8] Turris Omnia MCU driver

[PATCH v11 0/8] Turris Omnia MCU driver

[Marek Behún]

Hello Andy, Hans, Ilpo, Arnd, Gregory, and others,

this is v11 of the series adding Turris Omnia MCU driver.

Changes since v10:
- dropped patch 7 from v10 ("Add support for digital message signing via
  debugfs"). This must be done via different kernel API (should be
  doable via keyctl), but this requires more work which I currently
  don't have, unfortunately
- in patch 3 where I introduce support for MCU connected GPIOs
  changed u32 types to unsigned long where it made sense, in order
  to be able to use __assign_bit(), __set_bit(), test_bit().
  This was suggested by Andy.
- in patch 3 deduplicated code in omnia_gpio_get_multiple()
- moved the "fixing" in patch 3 of functions introduced in patch 2
  to patch 2, this was a rebasing error in v10
- changed date to September 2024 and KernelVersion to 6.11 in
  Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu

Links to previous cover letters (v1 to v10):
  https://patchwork.kernel.org/project/linux-soc/cover/20230823161012.6986-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20230919103815.16818-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20231023143130.11602-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20231026161803.16750-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240323164359.21642-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240418121116.22184-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240424173809.7214-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240430115111.3453-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240508103118.23345-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240510101819.13551-1-kabel@kernel.org/

Marek Behún (8):
  dt-bindings: firmware: add cznic,turris-omnia-mcu binding
  platform: cznic: Add preliminary support for Turris Omnia MCU
  platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
  platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
  platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG
  ARM: dts: turris-omnia: Add MCU system-controller node
  ARM: dts: turris-omnia: Add GPIO key node for front button

 .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  113 ++
 .../firmware/cznic,turris-omnia-mcu.yaml      |   86 ++
 MAINTAINERS                                   |    4 +
 .../dts/marvell/armada-385-turris-omnia.dts   |   35 +-
 drivers/platform/Kconfig                      |    2 +
 drivers/platform/Makefile                     |    1 +
 drivers/platform/cznic/Kconfig                |   48 +
 drivers/platform/cznic/Makefile               |    8 +
 .../platform/cznic/turris-omnia-mcu-base.c    |  407 +++++++
 .../platform/cznic/turris-omnia-mcu-gpio.c    | 1071 +++++++++++++++++
 .../cznic/turris-omnia-mcu-sys-off-wakeup.c   |  257 ++++
 .../platform/cznic/turris-omnia-mcu-trng.c    |  103 ++
 .../cznic/turris-omnia-mcu-watchdog.c         |  128 ++
 drivers/platform/cznic/turris-omnia-mcu.h     |  194 +++
 include/linux/turris-omnia-mcu-interface.h    |  249 ++++
 15 files changed, 2705 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 create mode 100644 Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
 create mode 100644 drivers/platform/cznic/Kconfig
 create mode 100644 drivers/platform/cznic/Makefile
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
 create mode 100644 include/linux/turris-omnia-mcu-interface.h

-- 
2.44.2

[PATCH v11 2/8] platform: cznic: Add preliminary support for Turris Omnia MCU

[Marek Behún]

Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  81 ++++
 MAINTAINERS                                   |   3 +
 drivers/platform/Kconfig                      |   2 +
 drivers/platform/Makefile                     |   1 +
 drivers/platform/cznic/Kconfig                |  25 ++
 drivers/platform/cznic/Makefile               |   4 +
 .../platform/cznic/turris-omnia-mcu-base.c    | 393 ++++++++++++++++++
 drivers/platform/cznic/turris-omnia-mcu.h     |  74 ++++
 include/linux/turris-omnia-mcu-interface.h    | 249 +++++++++++
 9 files changed, 832 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 create mode 100644 drivers/platform/cznic/Kconfig
 create mode 100644 drivers/platform/cznic/Makefile
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
 create mode 100644 include/linux/turris-omnia-mcu-interface.h

diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
new file mode 100644
index 000000000000..9bc5aad00de0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -0,0 +1,81 @@
+What:		/sys/bus/i2c/devices/<mcu_device>/board_revision
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains board revision number.
+
+		Only available if board information is burned in the MCU (older
+		revisions have board information burned in the ATSHA204-A chip).
+
+		Format: %u.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/first_mac_address
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains device first MAC address. Each Turris Omnia is
+		allocated 3 MAC addresses. The two additional addresses are
+		computed from the first one by incrementing it.
+
+		Only available if board information is burned in the MCU (older
+		revisions have board information burned in the ATSHA204-A chip).
+
+		Format: %pM.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_features
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Newer versions of the microcontroller firmware report the
+		features they support. These can be read from this file. If the
+		MCU firmware is too old, this file reads 0x0.
+
+		Format: 0x%x.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the version hash (commit hash) of the application
+		part of the microcontroller firmware.
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the version hash (commit hash) of the bootloader
+		part of the microcontroller firmware.
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/mcu_type
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the microcontroller type (STM32, GD32, MKL).
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/reset_selector
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the selected factory reset level, determined by
+		how long the rear reset button was held by the user during board
+		reset.
+
+		Format: %i.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/serial_number
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the 64-bit board serial number in hexadecimal
+		format.
+
+		Only available if board information is burned in the MCU (older
+		revisions have board information burned in the ATSHA204-A chip).
+
+		Format: %016X.
diff --git a/MAINTAINERS b/MAINTAINERS
index ee8b6dcd8f53..9f6dca4627c2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2207,6 +2207,7 @@ M:	Marek Behún <kabel@kernel.org>
 S:	Maintained
 W:	https://www.turris.cz/
 F:	Documentation/ABI/testing/debugfs-moxtet
+F:	Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 F:	Documentation/ABI/testing/sysfs-bus-moxtet-devices
 F:	Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
 F:	Documentation/devicetree/bindings/bus/moxtet.txt
@@ -2220,10 +2221,12 @@ F:	drivers/firmware/turris-mox-rwtm.c
 F:	drivers/gpio/gpio-moxtet.c
 F:	drivers/leds/leds-turris-omnia.c
 F:	drivers/mailbox/armada-37xx-rwtm-mailbox.c
+F:	drivers/platform/cznic/
 F:	drivers/watchdog/armada_37xx_wdt.c
 F:	include/dt-bindings/bus/moxtet.h
 F:	include/linux/armada-37xx-rwtm-mailbox.h
 F:	include/linux/moxtet.h
+F:	include/linux/turris-omnia-mcu-interface.h
 
 ARM/FARADAY FA526 PORT
 M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 81a298517df2..960fd6a82450 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig"
 
 source "drivers/platform/chrome/Kconfig"
 
+source "drivers/platform/cznic/Kconfig"
+
 source "drivers/platform/mellanox/Kconfig"
 
 source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index fbbe4f77aa5d..bf69cc8d7429 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -10,5 +10,6 @@ obj-$(CONFIG_MIPS)		+= mips/
 obj-$(CONFIG_OLPC_EC)		+= olpc/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
 obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
+obj-$(CONFIG_CZNIC_PLATFORMS)	+= cznic/
 obj-$(CONFIG_SURFACE_PLATFORMS)	+= surface/
 obj-$(CONFIG_ARM64)		+= arm64/
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
new file mode 100644
index 000000000000..db5f4a673d28
--- /dev/null
+++ b/drivers/platform/cznic/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menuconfig CZNIC_PLATFORMS
+	bool "Platform support for CZ.NIC's Turris hardware"
+	help
+	  Say Y here to be able to choose driver support for CZ.NIC's Turris
+	  devices. This option alone does not add any kernel code.
+
+if CZNIC_PLATFORMS
+
+config TURRIS_OMNIA_MCU
+	tristate "Turris Omnia MCU driver"
+	depends on MACH_ARMADA_38X || COMPILE_TEST
+	depends on I2C
+	help
+	  Say Y here to add support for the features implemented by the
+	  microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+	  To compile this driver as a module, choose M here; the module will be
+	  called turris-omnia-mcu.
+
+endif # CZNIC_PLATFORMS
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
new file mode 100644
index 000000000000..31adca73bb94
--- /dev/null
+++ b/drivers/platform/cznic/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris-omnia-mcu.o
+turris-omnia-mcu-y		:= turris-omnia-mcu-base.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
new file mode 100644
index 000000000000..a5ae2ba9abb6
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hex.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#include "turris-omnia-mcu.h"
+
+#define OMNIA_FW_VERSION_LEN		20
+#define OMNIA_FW_VERSION_HEX_LEN	(2 * OMNIA_FW_VERSION_LEN + 1)
+#define OMNIA_BOARD_INFO_LEN		16
+
+int omnia_cmd_write_read(const struct i2c_client *client,
+			 void *cmd, unsigned int cmd_len,
+			 void *reply, unsigned int reply_len)
+{
+	struct i2c_msg msgs[2];
+	int ret, num;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = cmd_len;
+	msgs[0].buf = cmd;
+	num = 1;
+
+	if (reply_len) {
+		msgs[1].addr = client->addr;
+		msgs[1].flags = I2C_M_RD;
+		msgs[1].len = reply_len;
+		msgs[1].buf = reply;
+		num++;
+	}
+
+	ret = i2c_transfer(client->adapter, msgs, num);
+	if (ret < 0)
+		return ret;
+	if (ret != num)
+		return -EIO;
+
+	return 0;
+}
+
+static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
+				  char version[static OMNIA_FW_VERSION_HEX_LEN])
+{
+	u8 reply[OMNIA_FW_VERSION_LEN];
+	char *p;
+	int err;
+
+	err = omnia_cmd_read(mcu->client,
+			     bootloader ? OMNIA_CMD_GET_FW_VERSION_BOOT
+					: OMNIA_CMD_GET_FW_VERSION_APP,
+			     reply, sizeof(reply));
+	if (err)
+		return err;
+
+	p = bin2hex(version, reply, OMNIA_FW_VERSION_LEN);
+	*p = '\0';
+
+	return 0;
+}
+
+static ssize_t fw_version_hash_show(struct device *dev, char *buf,
+				    bool bootloader)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+	char version[OMNIA_FW_VERSION_HEX_LEN];
+	int err;
+
+	err = omnia_get_version_hash(mcu, bootloader, version);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%s\n", version);
+}
+
+static ssize_t fw_version_hash_application_show(struct device *dev,
+						struct device_attribute *a,
+						char *buf)
+{
+	return fw_version_hash_show(dev, buf, false);
+}
+static DEVICE_ATTR_RO(fw_version_hash_application);
+
+static ssize_t fw_version_hash_bootloader_show(struct device *dev,
+					       struct device_attribute *a,
+					       char *buf)
+{
+	return fw_version_hash_show(dev, buf, true);
+}
+static DEVICE_ATTR_RO(fw_version_hash_bootloader);
+
+static ssize_t fw_features_show(struct device *dev, struct device_attribute *a,
+				char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "0x%x\n", mcu->features);
+}
+static DEVICE_ATTR_RO(fw_features);
+
+static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a,
+			     char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%s\n", mcu->type);
+}
+static DEVICE_ATTR_RO(mcu_type);
+
+static ssize_t reset_selector_show(struct device *dev,
+				   struct device_attribute *a, char *buf)
+{
+	u8 reply;
+	int err;
+
+	err = omnia_cmd_read_u8(to_i2c_client(dev), OMNIA_CMD_GET_RESET,
+				&reply);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%d\n", reply);
+}
+static DEVICE_ATTR_RO(reset_selector);
+
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number);
+}
+static DEVICE_ATTR_RO(serial_number);
+
+static ssize_t first_mac_address_show(struct device *dev,
+				      struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%pM\n", mcu->board_first_mac);
+}
+static DEVICE_ATTR_RO(first_mac_address);
+
+static ssize_t board_revision_show(struct device *dev,
+				   struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%u\n", mcu->board_revision);
+}
+static DEVICE_ATTR_RO(board_revision);
+
+static struct attribute *omnia_mcu_base_attrs[] = {
+	&dev_attr_fw_version_hash_application.attr,
+	&dev_attr_fw_version_hash_bootloader.attr,
+	&dev_attr_fw_features.attr,
+	&dev_attr_mcu_type.attr,
+	&dev_attr_reset_selector.attr,
+	&dev_attr_serial_number.attr,
+	&dev_attr_first_mac_address.attr,
+	&dev_attr_board_revision.attr,
+	NULL
+};
+
+static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj,
+					    struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	if ((a == &dev_attr_serial_number.attr ||
+	     a == &dev_attr_first_mac_address.attr ||
+	     a == &dev_attr_board_revision.attr) &&
+	    !(mcu->features & OMNIA_FEAT_BOARD_INFO))
+		return 0;
+
+	return a->mode;
+}
+
+static const struct attribute_group omnia_mcu_base_group = {
+	.attrs = omnia_mcu_base_attrs,
+	.is_visible = omnia_mcu_base_attrs_visible,
+};
+
+static const struct attribute_group *omnia_mcu_groups[] = {
+	&omnia_mcu_base_group,
+	NULL
+};
+
+static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
+{
+	const char *type = bootloader ? "bootloader" : "application";
+	struct device *dev = &mcu->client->dev;
+	char version[OMNIA_FW_VERSION_HEX_LEN];
+	int err;
+
+	err = omnia_get_version_hash(mcu, bootloader, version);
+	if (err) {
+		dev_err(dev, "Cannot read MCU %s firmware version: %d\n",
+			type, err);
+		return;
+	}
+
+	dev_info(dev, "MCU %s firmware version hash: %s\n", type, version);
+}
+
+static const char *omnia_status_to_mcu_type(u16 status)
+{
+	switch (status & OMNIA_STS_MCU_TYPE_MASK) {
+	case OMNIA_STS_MCU_TYPE_STM32:
+		return "STM32";
+	case OMNIA_STS_MCU_TYPE_GD32:
+		return "GD32";
+	case OMNIA_STS_MCU_TYPE_MKL:
+		return "MKL";
+	default:
+		return "unknown";
+	}
+}
+
+static void omnia_info_missing_feature(struct device *dev, const char *feature)
+{
+	dev_info(dev,
+		 "Your board's MCU firmware does not support the %s feature.\n",
+		 feature);
+}
+
+static int omnia_mcu_read_features(struct omnia_mcu *mcu)
+{
+	static const struct {
+		u16 mask;
+		const char *name;
+	} features[] = {
+#define _DEF_FEAT(_n, _m) { OMNIA_FEAT_ ## _n, _m }
+		_DEF_FEAT(EXT_CMDS,		"extended control and status"),
+		_DEF_FEAT(WDT_PING,		"watchdog pinging"),
+		_DEF_FEAT(LED_STATE_EXT_MASK,	"peripheral LED pins reading"),
+		_DEF_FEAT(NEW_INT_API,		"new interrupt API"),
+		_DEF_FEAT(POWEROFF_WAKEUP,	"poweroff and wakeup"),
+		_DEF_FEAT(TRNG,			"true random number generator"),
+#undef _DEF_FEAT
+	};
+	struct i2c_client *client = mcu->client;
+	struct device *dev = &client->dev;
+	bool suggest_fw_upgrade = false;
+	u16 status;
+	int err;
+
+	/* status word holds MCU type, which we need below */
+	err = omnia_cmd_read_u16(client, OMNIA_CMD_GET_STATUS_WORD, &status);
+	if (err)
+		return err;
+
+	/*
+	 * Check whether MCU firmware supports the OMNIA_CMD_GET_FEATURES
+	 * command.
+	 */
+	if (status & OMNIA_STS_FEATURES_SUPPORTED) {
+		/* try read 32-bit features */
+		err = omnia_cmd_read_u32(client, OMNIA_CMD_GET_FEATURES,
+					 &mcu->features);
+		if (err) {
+			/* try read 16-bit features */
+			u16 features16;
+
+			err = omnia_cmd_read_u16(client, OMNIA_CMD_GET_FEATURES,
+						 &features16);
+			if (err)
+				return err;
+
+			mcu->features = features16;
+		} else {
+			if (mcu->features & OMNIA_FEAT_FROM_BIT_16_INVALID)
+				mcu->features &= GENMASK(15, 0);
+		}
+	} else {
+		dev_info(dev,
+			 "Your board's MCU firmware does not support feature reading.\n");
+		suggest_fw_upgrade = true;
+	}
+
+	mcu->type = omnia_status_to_mcu_type(status);
+	dev_info(dev, "MCU type %s%s\n", mcu->type,
+		 (mcu->features & OMNIA_FEAT_PERIPH_MCU) ?
+			", with peripheral resets wired" : "");
+
+	omnia_mcu_print_version_hash(mcu, true);
+
+	if (mcu->features & OMNIA_FEAT_BOOTLOADER)
+		dev_warn(dev,
+			 "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n");
+	else
+		omnia_mcu_print_version_hash(mcu, false);
+
+	for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) {
+		if (mcu->features & features[i].mask)
+			continue;
+
+		omnia_info_missing_feature(dev, features[i].name);
+		suggest_fw_upgrade = true;
+	}
+
+	if (suggest_fw_upgrade)
+		dev_info(dev,
+			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
+
+	return 0;
+}
+
+static int omnia_mcu_read_board_info(struct omnia_mcu *mcu)
+{
+	u8 reply[1 + OMNIA_BOARD_INFO_LEN];
+	int err;
+
+	err = omnia_cmd_read(mcu->client, OMNIA_CMD_BOARD_INFO_GET, reply,
+			     sizeof(reply));
+	if (err)
+		return err;
+
+	if (reply[0] != OMNIA_BOARD_INFO_LEN)
+		return -EIO;
+
+	mcu->board_serial_number = get_unaligned_le64(&reply[1]);
+
+	/* we can't use ether_addr_copy() because reply is not u16-aligned */
+	memcpy(mcu->board_first_mac, &reply[9], ETH_ALEN);
+
+	mcu->board_revision = reply[15];
+
+	return 0;
+}
+
+static int omnia_mcu_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct omnia_mcu *mcu;
+	int err;
+
+	if (!client->irq)
+		return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n");
+
+	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
+	if (!mcu)
+		return -ENOMEM;
+
+	mcu->client = client;
+	i2c_set_clientdata(client, mcu);
+
+	err = omnia_mcu_read_features(mcu);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Cannot determine MCU supported features\n");
+
+	if (mcu->features & OMNIA_FEAT_BOARD_INFO) {
+		err = omnia_mcu_read_board_info(mcu);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "Cannot read board info\n");
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_omnia_mcu_match[] = {
+	{ .compatible = "cznic,turris-omnia-mcu" },
+	{}
+};
+
+static struct i2c_driver omnia_mcu_driver = {
+	.probe		= omnia_mcu_probe,
+	.driver		= {
+		.name	= "turris-omnia-mcu",
+		.of_match_table = of_omnia_mcu_match,
+		.dev_groups = omnia_mcu_groups,
+	},
+};
+module_i2c_driver(omnia_mcu_driver);
+
+MODULE_AUTHOR("Marek Behun <kabel@kernel.org>");
+MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
new file mode 100644
index 000000000000..3d0daa6f13ef
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_H
+#define __TURRIS_OMNIA_MCU_H
+
+#include <linux/if_ether.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct i2c_client;
+
+struct omnia_mcu {
+	struct i2c_client *client;
+	const char *type;
+	u32 features;
+
+	/* board information */
+	u64 board_serial_number;
+	u8 board_first_mac[ETH_ALEN];
+	u8 board_revision;
+};
+
+int omnia_cmd_write_read(const struct i2c_client *client,
+			 void *cmd, unsigned int cmd_len,
+			 void *reply, unsigned int reply_len);
+
+static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd,
+				 void *reply, unsigned int len)
+{
+	return omnia_cmd_write_read(client, &cmd, 1, reply, len);
+}
+
+static inline int omnia_cmd_read_u32(const struct i2c_client *client, u8 cmd,
+				     u32 *dst)
+{
+	__le32 reply;
+	int err;
+
+	err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+	if (err)
+		return err;
+
+	*dst = le32_to_cpu(reply);
+
+	return 0;
+}
+
+static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd,
+				     u16 *dst)
+{
+	__le16 reply;
+	int err;
+
+	err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+	if (err)
+		return err;
+
+	*dst = le16_to_cpu(reply);
+
+	return 0;
+}
+
+static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd,
+				    u8 *reply)
+{
+	return omnia_cmd_read(client, cmd, reply, sizeof(*reply));
+}
+
+#endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h
new file mode 100644
index 000000000000..2da8cbeb158a
--- /dev/null
+++ b/include/linux/turris-omnia-mcu-interface.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H
+#define __TURRIS_OMNIA_MCU_INTERFACE_H
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+enum omnia_commands_e {
+	OMNIA_CMD_GET_STATUS_WORD		= 0x01, /* slave sends status word back */
+	OMNIA_CMD_GENERAL_CONTROL		= 0x02,
+	OMNIA_CMD_LED_MODE			= 0x03, /* default/user */
+	OMNIA_CMD_LED_STATE			= 0x04, /* LED on/off */
+	OMNIA_CMD_LED_COLOR			= 0x05, /* LED number + RED + GREEN + BLUE */
+	OMNIA_CMD_USER_VOLTAGE			= 0x06,
+	OMNIA_CMD_SET_BRIGHTNESS		= 0x07,
+	OMNIA_CMD_GET_BRIGHTNESS		= 0x08,
+	OMNIA_CMD_GET_RESET			= 0x09,
+	OMNIA_CMD_GET_FW_VERSION_APP		= 0x0A, /* 20B git hash number */
+	OMNIA_CMD_SET_WATCHDOG_STATE		= 0x0B, /* 0 - disable
+							 * 1 - enable / ping
+							 * after boot watchdog is started
+							 * with 2 minutes timeout
+							 */
+
+	/* OMNIA_CMD_WATCHDOG_STATUS		= 0x0C, not implemented anymore */
+
+	OMNIA_CMD_GET_WATCHDOG_STATE		= 0x0D,
+	OMNIA_CMD_GET_FW_VERSION_BOOT		= 0x0E, /* 20B Git hash number */
+	OMNIA_CMD_GET_FW_CHECKSUM		= 0x0F, /* 4B length, 4B checksum */
+
+	/* available if FEATURES_SUPPORTED bit set in status word */
+	OMNIA_CMD_GET_FEATURES			= 0x10,
+
+	/* available if EXT_CMD bit set in features */
+	OMNIA_CMD_GET_EXT_STATUS_DWORD		= 0x11,
+	OMNIA_CMD_EXT_CONTROL			= 0x12,
+	OMNIA_CMD_GET_EXT_CONTROL_STATUS	= 0x13,
+
+	/* available if NEW_INT_API bit set in features */
+	OMNIA_CMD_GET_INT_AND_CLEAR		= 0x14,
+	OMNIA_CMD_GET_INT_MASK			= 0x15,
+	OMNIA_CMD_SET_INT_MASK			= 0x16,
+
+	/* available if FLASHING bit set in features */
+	OMNIA_CMD_FLASH				= 0x19,
+
+	/* available if WDT_PING bit set in features */
+	OMNIA_CMD_SET_WDT_TIMEOUT		= 0x20,
+	OMNIA_CMD_GET_WDT_TIMELEFT		= 0x21,
+
+	/* available if POWEROFF_WAKEUP bit set in features */
+	OMNIA_CMD_SET_WAKEUP			= 0x22,
+	OMNIA_CMD_GET_UPTIME_AND_WAKEUP		= 0x23,
+	OMNIA_CMD_POWER_OFF			= 0x24,
+
+	/* available if USB_OVC_PROT_SETTING bit set in features */
+	OMNIA_CMD_SET_USB_OVC_PROT		= 0x25,
+	OMNIA_CMD_GET_USB_OVC_PROT		= 0x26,
+
+	/* available if TRNG bit set in features */
+	OMNIA_CMD_TRNG_COLLECT_ENTROPY		= 0x28,
+
+	/* available if CRYPTO bit set in features */
+	OMNIA_CMD_CRYPTO_GET_PUBLIC_KEY		= 0x29,
+	OMNIA_CMD_CRYPTO_SIGN_MESSAGE		= 0x2A,
+	OMNIA_CMD_CRYPTO_COLLECT_SIGNATURE	= 0x2B,
+
+	/* available if BOARD_INFO it set in features */
+	OMNIA_CMD_BOARD_INFO_GET		= 0x2C,
+	OMNIA_CMD_BOARD_INFO_BURN		= 0x2D,
+
+	/* available only at address 0x2b (LED-controller) */
+	/* available only if LED_GAMMA_CORRECTION bit set in features */
+	OMNIA_CMD_SET_GAMMA_CORRECTION		= 0x30,
+	OMNIA_CMD_GET_GAMMA_CORRECTION		= 0x31,
+
+	/* available only at address 0x2b (LED-controller) */
+	/* available only if PER_LED_CORRECTION bit set in features */
+	/* available only if FROM_BIT_16_INVALID bit NOT set in features */
+	OMNIA_CMD_SET_LED_CORRECTIONS		= 0x32,
+	OMNIA_CMD_GET_LED_CORRECTIONS		= 0x33,
+};
+
+enum omnia_flashing_commands_e {
+	OMNIA_FLASH_CMD_UNLOCK		= 0x01,
+	OMNIA_FLASH_CMD_SIZE_AND_CSUM	= 0x02,
+	OMNIA_FLASH_CMD_PROGRAM		= 0x03,
+	OMNIA_FLASH_CMD_RESET		= 0x04,
+};
+
+enum omnia_sts_word_e {
+	OMNIA_STS_MCU_TYPE_MASK			= GENMASK(1, 0),
+	OMNIA_STS_MCU_TYPE_STM32		= FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 0),
+	OMNIA_STS_MCU_TYPE_GD32			= FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 1),
+	OMNIA_STS_MCU_TYPE_MKL			= FIELD_PREP_CONST(OMNIA_STS_MCU_TYPE_MASK, 2),
+	OMNIA_STS_FEATURES_SUPPORTED		= BIT(2),
+	OMNIA_STS_USER_REGULATOR_NOT_SUPPORTED	= BIT(3),
+	OMNIA_STS_CARD_DET			= BIT(4),
+	OMNIA_STS_MSATA_IND			= BIT(5),
+	OMNIA_STS_USB30_OVC			= BIT(6),
+	OMNIA_STS_USB31_OVC			= BIT(7),
+	OMNIA_STS_USB30_PWRON			= BIT(8),
+	OMNIA_STS_USB31_PWRON			= BIT(9),
+	OMNIA_STS_ENABLE_4V5			= BIT(10),
+	OMNIA_STS_BUTTON_MODE			= BIT(11),
+	OMNIA_STS_BUTTON_PRESSED		= BIT(12),
+	OMNIA_STS_BUTTON_COUNTER_MASK		= GENMASK(15, 13),
+};
+
+enum omnia_ctl_byte_e {
+	OMNIA_CTL_LIGHT_RST	= BIT(0),
+	OMNIA_CTL_HARD_RST	= BIT(1),
+	/* BIT(2) is currently reserved */
+	OMNIA_CTL_USB30_PWRON	= BIT(3),
+	OMNIA_CTL_USB31_PWRON	= BIT(4),
+	OMNIA_CTL_ENABLE_4V5	= BIT(5),
+	OMNIA_CTL_BUTTON_MODE	= BIT(6),
+	OMNIA_CTL_BOOTLOADER	= BIT(7),
+};
+
+enum omnia_features_e {
+	OMNIA_FEAT_PERIPH_MCU		= BIT(0),
+	OMNIA_FEAT_EXT_CMDS		= BIT(1),
+	OMNIA_FEAT_WDT_PING		= BIT(2),
+	OMNIA_FEAT_LED_STATE_EXT_MASK	= GENMASK(4, 3),
+	OMNIA_FEAT_LED_STATE_EXT	= FIELD_PREP_CONST(OMNIA_FEAT_LED_STATE_EXT_MASK, 1),
+	OMNIA_FEAT_LED_STATE_EXT_V32	= FIELD_PREP_CONST(OMNIA_FEAT_LED_STATE_EXT_MASK, 2),
+	OMNIA_FEAT_LED_GAMMA_CORRECTION	= BIT(5),
+	OMNIA_FEAT_NEW_INT_API		= BIT(6),
+	OMNIA_FEAT_BOOTLOADER		= BIT(7),
+	OMNIA_FEAT_FLASHING		= BIT(8),
+	OMNIA_FEAT_NEW_MESSAGE_API	= BIT(9),
+	OMNIA_FEAT_BRIGHTNESS_INT	= BIT(10),
+	OMNIA_FEAT_POWEROFF_WAKEUP	= BIT(11),
+	OMNIA_FEAT_CAN_OLD_MESSAGE_API	= BIT(12),
+	OMNIA_FEAT_TRNG			= BIT(13),
+	OMNIA_FEAT_CRYPTO		= BIT(14),
+	OMNIA_FEAT_BOARD_INFO		= BIT(15),
+
+	/*
+	 * Orginally the features command replied only 16 bits. If more were
+	 * read, either the I2C transaction failed or 0xff bytes were sent.
+	 * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved
+	 * to be zero.
+	 */
+
+	/* Bits 16 - 19 correspond to bits 0 - 3 of status word */
+	OMNIA_FEAT_MCU_TYPE_MASK		= GENMASK(17, 16),
+	OMNIA_FEAT_MCU_TYPE_STM32		= FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 0),
+	OMNIA_FEAT_MCU_TYPE_GD32		= FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 1),
+	OMNIA_FEAT_MCU_TYPE_MKL			= FIELD_PREP_CONST(OMNIA_FEAT_MCU_TYPE_MASK, 2),
+	OMNIA_FEAT_FEATURES_SUPPORTED		= BIT(18),
+	OMNIA_FEAT_USER_REGULATOR_NOT_SUPPORTED	= BIT(19),
+
+	/* must not be set */
+	OMNIA_FEAT_FROM_BIT_16_INVALID	= BIT(20),
+
+	OMNIA_FEAT_PER_LED_CORRECTION	= BIT(21),
+	OMNIA_FEAT_USB_OVC_PROT_SETTING	= BIT(22),
+};
+
+enum omnia_ext_sts_dword_e {
+	OMNIA_EXT_STS_SFP_nDET		= BIT(0),
+	OMNIA_EXT_STS_LED_STATES_MASK	= GENMASK(31, 12),
+	OMNIA_EXT_STS_WLAN0_MSATA_LED	= BIT(12),
+	OMNIA_EXT_STS_WLAN1_LED		= BIT(13),
+	OMNIA_EXT_STS_WLAN2_LED		= BIT(14),
+	OMNIA_EXT_STS_WPAN0_LED		= BIT(15),
+	OMNIA_EXT_STS_WPAN1_LED		= BIT(16),
+	OMNIA_EXT_STS_WPAN2_LED		= BIT(17),
+	OMNIA_EXT_STS_WAN_LED0		= BIT(18),
+	OMNIA_EXT_STS_WAN_LED1		= BIT(19),
+	OMNIA_EXT_STS_LAN0_LED0		= BIT(20),
+	OMNIA_EXT_STS_LAN0_LED1		= BIT(21),
+	OMNIA_EXT_STS_LAN1_LED0		= BIT(22),
+	OMNIA_EXT_STS_LAN1_LED1		= BIT(23),
+	OMNIA_EXT_STS_LAN2_LED0		= BIT(24),
+	OMNIA_EXT_STS_LAN2_LED1		= BIT(25),
+	OMNIA_EXT_STS_LAN3_LED0		= BIT(26),
+	OMNIA_EXT_STS_LAN3_LED1		= BIT(27),
+	OMNIA_EXT_STS_LAN4_LED0		= BIT(28),
+	OMNIA_EXT_STS_LAN4_LED1		= BIT(29),
+	OMNIA_EXT_STS_LAN5_LED0		= BIT(30),
+	OMNIA_EXT_STS_LAN5_LED1		= BIT(31),
+};
+
+enum omnia_ext_ctl_e {
+	OMNIA_EXT_CTL_nRES_MMC		= BIT(0),
+	OMNIA_EXT_CTL_nRES_LAN		= BIT(1),
+	OMNIA_EXT_CTL_nRES_PHY		= BIT(2),
+	OMNIA_EXT_CTL_nPERST0		= BIT(3),
+	OMNIA_EXT_CTL_nPERST1		= BIT(4),
+	OMNIA_EXT_CTL_nPERST2		= BIT(5),
+	OMNIA_EXT_CTL_PHY_SFP		= BIT(6),
+	OMNIA_EXT_CTL_PHY_SFP_AUTO	= BIT(7),
+	OMNIA_EXT_CTL_nVHV_CTRL		= BIT(8),
+};
+
+enum omnia_int_e {
+	OMNIA_INT_CARD_DET		= BIT(0),
+	OMNIA_INT_MSATA_IND		= BIT(1),
+	OMNIA_INT_USB30_OVC		= BIT(2),
+	OMNIA_INT_USB31_OVC		= BIT(3),
+	OMNIA_INT_BUTTON_PRESSED	= BIT(4),
+	OMNIA_INT_SFP_nDET		= BIT(5),
+	OMNIA_INT_BRIGHTNESS_CHANGED	= BIT(6),
+	OMNIA_INT_TRNG			= BIT(7),
+	OMNIA_INT_MESSAGE_SIGNED	= BIT(8),
+
+	OMNIA_INT_LED_STATES_MASK	= GENMASK(31, 12),
+	OMNIA_INT_WLAN0_MSATA_LED	= BIT(12),
+	OMNIA_INT_WLAN1_LED		= BIT(13),
+	OMNIA_INT_WLAN2_LED		= BIT(14),
+	OMNIA_INT_WPAN0_LED		= BIT(15),
+	OMNIA_INT_WPAN1_LED		= BIT(16),
+	OMNIA_INT_WPAN2_LED		= BIT(17),
+	OMNIA_INT_WAN_LED0		= BIT(18),
+	OMNIA_INT_WAN_LED1		= BIT(19),
+	OMNIA_INT_LAN0_LED0		= BIT(20),
+	OMNIA_INT_LAN0_LED1		= BIT(21),
+	OMNIA_INT_LAN1_LED0		= BIT(22),
+	OMNIA_INT_LAN1_LED1		= BIT(23),
+	OMNIA_INT_LAN2_LED0		= BIT(24),
+	OMNIA_INT_LAN2_LED1		= BIT(25),
+	OMNIA_INT_LAN3_LED0		= BIT(26),
+	OMNIA_INT_LAN3_LED1		= BIT(27),
+	OMNIA_INT_LAN4_LED0		= BIT(28),
+	OMNIA_INT_LAN4_LED1		= BIT(29),
+	OMNIA_INT_LAN5_LED0		= BIT(30),
+	OMNIA_INT_LAN5_LED1		= BIT(31),
+};
+
+enum omnia_cmd_poweroff_e {
+	OMNIA_CMD_POWER_OFF_POWERON_BUTTON	= BIT(0),
+	OMNIA_CMD_POWER_OFF_MAGIC		= 0xdead,
+};
+
+enum omnia_cmd_usb_ovc_prot_e {
+	OMNIA_CMD_xET_USB_OVC_PROT_PORT_MASK	= GENMASK(3, 0),
+	OMNIA_CMD_xET_USB_OVC_PROT_ENABLE	= BIT(4),
+};
+
+#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */
-- 
2.44.2

[PATCH v11 4/8] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup

[Marek Behún]

Add support for true board poweroff (MCU can disable all unnecessary
voltage regulators) and wakeup at a specified time, implemented via a
RTC driver so that the rtcwake utility can be used to configure it.

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  16 ++
 drivers/platform/cznic/Kconfig                |   4 +
 drivers/platform/cznic/Makefile               |   1 +
 .../platform/cznic/turris-omnia-mcu-base.c    |   5 +
 .../cznic/turris-omnia-mcu-sys-off-wakeup.c   | 257 ++++++++++++++++++
 drivers/platform/cznic/turris-omnia-mcu.h     |  20 ++
 6 files changed, 303 insertions(+)
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c

diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
index 86360249080c..307a55f599cb 100644
--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -38,6 +38,22 @@ Description:	(RW) The front button on the Turris Omnia router can be
 
 		Format: %s.
 
+What:		/sys/bus/i2c/devices/<mcu_device>/front_button_poweron
+Date:		September 2024
+KernelVersion:	6.11
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RW) Newer versions of the microcontroller firmware of the
+		Turris Omnia router support powering off the router into true
+		low power mode. The router can be powered on by pressing the
+		front button.
+
+		This file configures whether front button power on is enabled.
+
+		This file is present only if the power off feature is supported
+		by the firmware.
+
+		Format: %i.
+
 What:		/sys/bus/i2c/devices/<mcu_device>/fw_features
 Date:		September 2024
 KernelVersion:	6.11
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
index d95e7c83c7ae..c1e719235517 100644
--- a/drivers/platform/cznic/Kconfig
+++ b/drivers/platform/cznic/Kconfig
@@ -18,10 +18,14 @@ config TURRIS_OMNIA_MCU
 	depends on I2C
 	select GPIOLIB
 	select GPIOLIB_IRQCHIP
+	select RTC_CLASS
 	help
 	  Say Y here to add support for the features implemented by the
 	  microcontroller on the CZ.NIC's Turris Omnia SOHO router.
 	  The features include:
+	  - board poweroff into true low power mode (with voltage regulators
+	    disabled) and the ability to configure wake up from this mode (via
+	    rtcwake)
 	  - GPIO pins
 	    - to get front button press events (the front button can be
 	      configured either to generate press events to the CPU or to change
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
index 53fd8f1777a3..a185ef882e44 100644
--- a/drivers/platform/cznic/Makefile
+++ b/drivers/platform/cznic/Makefile
@@ -3,3 +3,4 @@
 obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris-omnia-mcu.o
 turris-omnia-mcu-y		:= turris-omnia-mcu-base.o
 turris-omnia-mcu-y		+= turris-omnia-mcu-gpio.o
+turris-omnia-mcu-y		+= turris-omnia-mcu-sys-off-wakeup.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
index 03a5f19c6665..479f355f730a 100644
--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -197,6 +197,7 @@ static const struct attribute_group omnia_mcu_base_group = {
 static const struct attribute_group *omnia_mcu_groups[] = {
 	&omnia_mcu_base_group,
 	&omnia_mcu_gpio_group,
+	&omnia_mcu_poweroff_group,
 	NULL
 };
 
@@ -371,6 +372,10 @@ static int omnia_mcu_probe(struct i2c_client *client)
 					     "Cannot read board info\n");
 	}
 
+	err = omnia_mcu_register_sys_off_and_wakeup(mcu);
+	if (err)
+		return err;
+
 	return omnia_mcu_register_gpiochip(mcu);
 }
 
diff --git a/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
new file mode 100644
index 000000000000..272664b1b77d
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU system off and RTC wakeup driver
+ *
+ * This is not a true RTC driver (in the sense that it does not provide a
+ * real-time clock), rather the MCU implements a wakeup from powered off state
+ * at a specified time relative to MCU boot, and we expose this feature via RTC
+ * alarm, so that it can be used via the rtcwake command, which is the standard
+ * Linux command for this.
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/reboot.h>
+#include <linux/rtc.h>
+#include <linux/sysfs.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+
+#include "turris-omnia-mcu.h"
+
+static int omnia_get_uptime_wakeup(const struct i2c_client *client, u32 *uptime,
+				   u32 *wakeup)
+{
+	__le32 reply[2];
+	int err;
+
+	err = omnia_cmd_read(client, OMNIA_CMD_GET_UPTIME_AND_WAKEUP, reply,
+			     sizeof(reply));
+	if (err)
+		return err;
+
+	if (uptime)
+		*uptime = le32_to_cpu(reply[0]);
+
+	if (wakeup)
+		*wakeup = le32_to_cpu(reply[1]);
+
+	return 0;
+}
+
+static int omnia_read_time(struct device *dev, struct rtc_time *tm)
+{
+	u32 uptime;
+	int err;
+
+	err = omnia_get_uptime_wakeup(to_i2c_client(dev), &uptime, NULL);
+	if (err)
+		return err;
+
+	rtc_time64_to_tm(uptime, tm);
+
+	return 0;
+}
+
+static int omnia_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct omnia_mcu *mcu = i2c_get_clientdata(client);
+	u32 wakeup;
+	int err;
+
+	err = omnia_get_uptime_wakeup(client, NULL, &wakeup);
+	if (err)
+		return err;
+
+	alrm->enabled = !!wakeup;
+	rtc_time64_to_tm(wakeup ?: mcu->rtc_alarm, &alrm->time);
+
+	return 0;
+}
+
+static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct omnia_mcu *mcu = i2c_get_clientdata(client);
+
+	mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time);
+
+	if (alrm->enabled)
+		return omnia_cmd_write_u32(client, OMNIA_CMD_SET_WAKEUP,
+					   mcu->rtc_alarm);
+
+	return 0;
+}
+
+static int omnia_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct omnia_mcu *mcu = i2c_get_clientdata(client);
+
+	return omnia_cmd_write_u32(client, OMNIA_CMD_SET_WAKEUP,
+				   enabled ? mcu->rtc_alarm : 0);
+}
+
+static const struct rtc_class_ops omnia_rtc_ops = {
+	.read_time		= omnia_read_time,
+	.read_alarm		= omnia_read_alarm,
+	.set_alarm		= omnia_set_alarm,
+	.alarm_irq_enable	= omnia_alarm_irq_enable,
+};
+
+static int omnia_power_off(struct sys_off_data *data)
+{
+	struct omnia_mcu *mcu = data->cb_data;
+	__be32 tmp;
+	u8 cmd[9];
+	u16 arg;
+	int err;
+
+	if (mcu->front_button_poweron)
+		arg = OMNIA_CMD_POWER_OFF_POWERON_BUTTON;
+	else
+		arg = 0;
+
+	cmd[0] = OMNIA_CMD_POWER_OFF;
+	put_unaligned_le16(OMNIA_CMD_POWER_OFF_MAGIC, &cmd[1]);
+	put_unaligned_le16(arg, &cmd[3]);
+
+	/*
+	 * Although all values from and to MCU are passed in little-endian, the
+	 * MCU's CRC unit uses big-endian CRC32 polynomial (0x04c11db7), so we
+	 * need to use crc32_be() here.
+	 */
+	tmp = cpu_to_be32(get_unaligned_le32(&cmd[1]));
+	put_unaligned_le32(crc32_be(~0, (void *)&tmp, sizeof(tmp)), &cmd[5]);
+
+	err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+	if (err)
+		dev_err(&mcu->client->dev,
+			"Unable to send the poweroff command: %d\n", err);
+
+	return NOTIFY_DONE;
+}
+
+static int omnia_restart(struct sys_off_data *data)
+{
+	struct omnia_mcu *mcu = data->cb_data;
+	u8 cmd[3];
+	int err;
+
+	cmd[0] = OMNIA_CMD_GENERAL_CONTROL;
+
+	if (reboot_mode == REBOOT_HARD)
+		cmd[1] = cmd[2] = OMNIA_CTL_HARD_RST;
+	else
+		cmd[1] = cmd[2] = OMNIA_CTL_LIGHT_RST;
+
+	err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+	if (err)
+		dev_err(&mcu->client->dev,
+			"Unable to send the restart command: %d\n", err);
+
+	/*
+	 * MCU needs a little bit to process the I2C command, otherwise it will
+	 * do a light reset based on SOC SYSRES_OUT pin.
+	 */
+	mdelay(1);
+
+	return NOTIFY_DONE;
+}
+
+static ssize_t front_button_poweron_show(struct device *dev,
+					 struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", mcu->front_button_poweron);
+}
+
+static ssize_t front_button_poweron_store(struct device *dev,
+					  struct device_attribute *a,
+					  const char *buf, size_t count)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+	bool val;
+	int err;
+
+	err = kstrtobool(buf, &val);
+	if (err)
+		return err;
+
+	mcu->front_button_poweron = val;
+
+	return count;
+}
+static DEVICE_ATTR_RW(front_button_poweron);
+
+static struct attribute *omnia_mcu_poweroff_attrs[] = {
+	&dev_attr_front_button_poweron.attr,
+	NULL
+};
+
+static umode_t poweroff_attrs_visible(struct kobject *kobj, struct attribute *a,
+				      int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	if (mcu->features & OMNIA_FEAT_POWEROFF_WAKEUP)
+		return a->mode;
+
+	return 0;
+}
+
+const struct attribute_group omnia_mcu_poweroff_group = {
+	.attrs = omnia_mcu_poweroff_attrs,
+	.is_visible = poweroff_attrs_visible,
+};
+
+int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu)
+{
+	struct device *dev = &mcu->client->dev;
+	int err;
+
+	/* MCU restart is always available */
+	err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART,
+					    SYS_OFF_PRIO_FIRMWARE,
+					    omnia_restart, mcu);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Cannot register system restart handler\n");
+
+	/*
+	 * Poweroff and wakeup are available only if POWEROFF_WAKEUP feature is
+	 * present.
+	 */
+	if (!(mcu->features & OMNIA_FEAT_POWEROFF_WAKEUP))
+		return 0;
+
+	err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF,
+					    SYS_OFF_PRIO_FIRMWARE,
+					    omnia_power_off, mcu);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Cannot register system power off handler\n");
+
+	mcu->rtcdev = devm_rtc_allocate_device(dev);
+	if (IS_ERR(mcu->rtcdev))
+		return dev_err_probe(dev, PTR_ERR(mcu->rtcdev),
+				     "Cannot allocate RTC device\n");
+
+	mcu->rtcdev->ops = &omnia_rtc_ops;
+	mcu->rtcdev->range_max = U32_MAX;
+	set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, mcu->rtcdev->features);
+
+	err = devm_rtc_register_device(mcu->rtcdev);
+	if (err)
+		return dev_err_probe(dev, err, "Cannot register RTC device\n");
+
+	mcu->front_button_poweron = true;
+
+	return 0;
+}
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
index 3d2dd0054499..5df421b03878 100644
--- a/drivers/platform/cznic/turris-omnia-mcu.h
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -12,9 +12,11 @@
 #include <linux/gpio/driver.h>
 #include <linux/if_ether.h>
 #include <linux/mutex.h>
+#include <linux/rtc.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
 #include <asm/byteorder.h>
+#include <asm/unaligned.h>
 
 struct i2c_client;
 
@@ -36,6 +38,11 @@ struct omnia_mcu {
 	struct delayed_work button_release_emul_work;
 	unsigned long last_status;
 	bool button_pressed_emul;
+
+	/* RTC device for configuring wake-up */
+	struct rtc_device *rtcdev;
+	u32 rtc_alarm;
+	bool front_button_poweron;
 };
 
 int omnia_cmd_write_read(const struct i2c_client *client,
@@ -48,6 +55,17 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
 	return omnia_cmd_write_read(client, cmd, len, NULL, 0);
 }
 
+static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
+				      u32 val)
+{
+	u8 buf[5];
+
+	buf[0] = cmd;
+	put_unaligned_le32(val, &buf[1]);
+
+	return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
 static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd,
 				 void *reply, unsigned int len)
 {
@@ -136,7 +154,9 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd,
 }
 
 extern const struct attribute_group omnia_mcu_gpio_group;
+extern const struct attribute_group omnia_mcu_poweroff_group;
 
 int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
 
 #endif /* __TURRIS_OMNIA_MCU_H */
-- 
2.44.2

Re: [PATCH v11 2/8] platform: cznic: Add preliminary support for Turris Omnia MCU

[Andy Shevchenko]

On Wed, Jun 5, 2024 at 7:19 PM Marek Behún <kabel@kernel.org> wrote:
>
> Add the basic skeleton for a new platform driver for the microcontroller
> found on the Turris Omnia board.

...

I paid attention to this block because of ETH_ALEN, see below.

> +#include <linux/array_size.h>
> +#include <linux/bits.h>
> +#include <linux/device.h>
> +#include <linux/hex.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>

> +#include <linux/turris-omnia-mcu-interface.h>

This is part of the niche of the driver, I would move it

> +#include <linux/types.h>

t is followed by s :-)

> +#include <linux/string.h>
> +#include <linux/sysfs.h>

...here as a separate group.

> +#include "turris-omnia-mcu.h"

...

> +       /* we can't use ether_addr_copy() because reply is not u16-aligned */
> +       memcpy(mcu->board_first_mac, &reply[9], ETH_ALEN);

The inclusion block misses the header for ETH_ALEN, but I realise that
instead it's better to use sizeof() as it makes this rely to the real
size of the buffer and header is not needed either.

...

Other than above LGTM, FWIW,
Reviewed-by: Andy Shevchenko <andy@kernel.org>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v11 4/8] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup

[Andy Shevchenko]

On Wed, Jun 5, 2024 at 7:19 PM Marek Behún <kabel@kernel.org> wrote:
>
> Add support for true board poweroff (MCU can disable all unnecessary
> voltage regulators) and wakeup at a specified time, implemented via a
> RTC driver so that the rtcwake utility can be used to configure it.

...

> +#include <linux/crc32.h>
> +#include <linux/delay.h>

+ device.h
+ err.h

> +#include <linux/i2c.h>

+ kstrtox.h

> +#include <linux/reboot.h>
> +#include <linux/rtc.h>
> +#include <linux/sysfs.h>

> +#include <linux/turris-omnia-mcu-interface.h>

As per other patches.

> +#include <linux/types.h>
> +
> +#include "turris-omnia-mcu.h"

...

> +       struct device *dev = kobj_to_dev(kobj);

Is this declared in device.h or elsewhere?

...

> +#include <linux/rtc.h>

I don't see you need it.
Just

struct rtc_device;

should suffice.

>  #include <linux/types.h>
>  #include <linux/workqueue.h>
>  #include <asm/byteorder.h>
> +#include <asm/unaligned.h>

...

With the above being addressed, LGTM, FWIW,
Reviewed-by: Andy Shevchenko <andy@kernel.org>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v11 0/8] Turris Omnia MCU driver

[Andy Shevchenko]

On Wed, Jun 5, 2024 at 7:19 PM Marek Behún <kabel@kernel.org> wrote:
>
> Hello Andy, Hans, Ilpo, Arnd, Gregory, and others,
>
> this is v11 of the series adding Turris Omnia MCU driver.

Thank you!
There are a few small issues here and there, but overall LGTM. The
only one main question is what to do with gpiochip_get_desc(). I Cc'ed
Bart for this.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v11 0/8] Turris Omnia MCU driver

[Marek Behún]

On Wed, 5 Jun 2024 22:05:37 +0300
Andy Shevchenko <andy.shevchenko@gmail.com> wrote:

> On Wed, Jun 5, 2024 at 7:19 PM Marek Behún <kabel@kernel.org> wrote:
> >
> > Hello Andy, Hans, Ilpo, Arnd, Gregory, and others,
> >
> > this is v11 of the series adding Turris Omnia MCU driver.  
> 
> Thank you!
> There are a few small issues here and there, but overall LGTM. The
> only one main question is what to do with gpiochip_get_desc(). I Cc'ed
> Bart for this.

Thank you for the review, I am going to apply the changes you requested
and wait for Bart, and we'll see what to do with the
gpiochip_get_desc().

Marek

Re: [PATCH v11 4/8] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup

[Marek Behún]

On Wed, 5 Jun 2024 21:41:04 +0300
Andy Shevchenko <andy.shevchenko@gmail.com> wrote:

> > +       struct device *dev = kobj_to_dev(kobj);  
> 
> Is this declared in device.h or elsewhere?

It is in device.h.