linux-rtc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	linux-rtc@vger.kernel.org (open list:REAL TIME CLOCK (RTC)
	SUBSYSTEM), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
Date: Mon, 14 Oct 2024 20:47:26 -0400	[thread overview]
Message-ID: <20241015004945.3676-2-jonathan@marek.ca> (raw)
In-Reply-To: <20241015004945.3676-1-jonathan@marek.ca>

Qualcomm x1e80100 firmware sets the ownership of the RTC alarm to ADSP.
Thus writing to RTC alarm registers and receiving alarm interrupts is not
possible.

Add a qcom,no-alarm flag to support RTC on this platform.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/rtc/rtc-pm8xxx.c | 44 +++++++++++++++++++++++++++-------------
 1 file changed, 30 insertions(+), 14 deletions(-)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index c32fba550c8e0..1e78939625622 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -61,6 +61,7 @@ struct pm8xxx_rtc {
 	struct rtc_device *rtc;
 	struct regmap *regmap;
 	bool allow_set_time;
+	bool no_alarm;
 	int alarm_irq;
 	const struct pm8xxx_rtc_regs *regs;
 	struct device *dev;
@@ -473,9 +474,14 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	if (!rtc_dd->regmap)
 		return -ENXIO;
 
-	rtc_dd->alarm_irq = platform_get_irq(pdev, 0);
-	if (rtc_dd->alarm_irq < 0)
-		return -ENXIO;
+	rtc_dd->no_alarm = of_property_read_bool(pdev->dev.of_node,
+						 "qcom,no-alarm");
+
+	if (!rtc_dd->no_alarm) {
+		rtc_dd->alarm_irq = platform_get_irq(pdev, 0);
+		if (rtc_dd->alarm_irq < 0)
+			return -ENXIO;
+	}
 
 	rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
 						      "allow-set-time");
@@ -503,7 +509,8 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rtc_dd);
 
-	device_init_wakeup(&pdev->dev, 1);
+	if (!rtc_dd->no_alarm)
+		device_init_wakeup(&pdev->dev, 1);
 
 	rtc_dd->rtc = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(rtc_dd->rtc))
@@ -512,27 +519,36 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	rtc_dd->rtc->ops = &pm8xxx_rtc_ops;
 	rtc_dd->rtc->range_max = U32_MAX;
 
-	rc = devm_request_any_context_irq(&pdev->dev, rtc_dd->alarm_irq,
-					  pm8xxx_alarm_trigger,
-					  IRQF_TRIGGER_RISING,
-					  "pm8xxx_rtc_alarm", rtc_dd);
-	if (rc < 0)
-		return rc;
+	if (!rtc_dd->no_alarm) {
+		rc = devm_request_any_context_irq(&pdev->dev, rtc_dd->alarm_irq,
+						  pm8xxx_alarm_trigger,
+						  IRQF_TRIGGER_RISING,
+						  "pm8xxx_rtc_alarm", rtc_dd);
+		if (rc < 0)
+			return rc;
+	}
 
 	rc = devm_rtc_register_device(rtc_dd->rtc);
 	if (rc)
 		return rc;
 
-	rc = dev_pm_set_wake_irq(&pdev->dev, rtc_dd->alarm_irq);
-	if (rc)
-		return rc;
+	if (!rtc_dd->no_alarm) {
+		rc = dev_pm_set_wake_irq(&pdev->dev, rtc_dd->alarm_irq);
+		if (rc)
+			return rc;
+	} else {
+		clear_bit(RTC_FEATURE_ALARM, rtc_dd->rtc->features);
+	}
 
 	return 0;
 }
 
 static void pm8xxx_remove(struct platform_device *pdev)
 {
-	dev_pm_clear_wake_irq(&pdev->dev);
+	struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
+
+	if (!rtc_dd->no_alarm)
+		dev_pm_clear_wake_irq(&pdev->dev);
 }
 
 static struct platform_driver pm8xxx_rtc_driver = {
-- 
2.45.1


  reply	other threads:[~2024-10-15  0:53 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-15  0:47 [PATCH v3 0/5] x1e80100 RTC support Jonathan Marek
2024-10-15  0:47 ` Jonathan Marek [this message]
2024-10-15 19:24   ` [PATCH v3 1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm Bjorn Andersson
2024-10-16  6:42   ` Johan Hovold
2024-10-16 12:26     ` Alexandre Belloni
2024-10-16 12:44     ` Jonathan Marek
2024-10-16 13:02       ` Johan Hovold
2024-10-16 13:12         ` Jonathan Marek
2024-10-16 13:21           ` Johan Hovold
2024-10-15  0:47 ` [PATCH v3 2/5] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag Jonathan Marek
2024-10-15  5:33   ` Krzysztof Kozlowski
2024-10-16  6:46   ` Johan Hovold
2025-01-12 23:35 ` [PATCH v3 0/5] x1e80100 RTC support Alexandre Belloni
2025-01-20 14:51   ` Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241015004945.3676-2-jonathan@marek.ca \
    --to=jonathan@marek.ca \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).