[PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Piyush Patle]

Convert the ISL12026 RTC binding from text format to YAML schema.
Remove the legacy text binding.

The new schema enables dtbs_check validation.

Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
---

Changes in v3:
- Removed unsupported select section

Changes in v2:
- Fixed dt_binding_check warnings
- Improved example formatting

Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
---
 .../devicetree/bindings/rtc/isil,isl12026.txt | 28 ---------
 .../bindings/rtc/isil,isl12026.yaml           | 59 +++++++++++++++++++
 2 files changed, 59 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/isil,isl12026.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl12026.yaml

diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
deleted file mode 100644
index 2e0be45193bb..000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-ISL12026 I2C RTC/EEPROM
-
-ISL12026 is an I2C RTC/EEPROM combination device.  The RTC and control
-registers respond at bus address 0x6f, and the EEPROM array responds
-at bus address 0x57.  The canonical "reg" value will be for the RTC portion.
-
-Required properties supported by the device:
-
- - "compatible": must be "isil,isl12026"
- - "reg": I2C bus address of the device (always 0x6f)
-
-Optional properties:
-
- - "isil,pwr-bsw": If present PWR.BSW bit must be set to the specified
-                   value for proper operation.
-
- - "isil,pwr-sbib": If present PWR.SBIB bit must be set to the specified
-                    value for proper operation.
-
-
-Example:
-
-	rtc@6f {
-		compatible = "isil,isl12026";
-		reg = <0x6f>;
-		isil,pwr-bsw = <0>;
-		isil,pwr-sbib = <1>;
-	}
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
new file mode 100644
index 000000000000..152edce2ab41
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl12026.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL12026 I2C RTC/EEPROM
+
+maintainers:
+  - Piyush Patle <piyushpatle228@gmail.com>
+
+description:
+  The ISL12026 is a combination RTC and EEPROM device connected via I2C.
+  The RTC and control registers respond at address 0x6f, while the EEPROM
+  array responds at address 0x57. The "reg" property refers to the RTC
+  portion of the device.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: isil,isl12026
+
+  reg:
+    maxItems: 1
+    description: I2C address of the RTC portion (must be 0x6f)
+
+  isil,pwr-bsw:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Value written to the PWR.BSW bit for proper device operation.
+
+  isil,pwr-sbib:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Value written to the PWR.SBIB bit for proper device operation.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "isil,isl12026";
+            reg = <0x6f>;
+            isil,pwr-bsw = <0>;
+            isil,pwr-sbib = <1>;
+        };
+    };
-- 
2.34.1

Re: [PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Krzysztof Kozlowski]

On Sat, Feb 28, 2026 at 12:21:15AM +0530, Piyush Patle wrote:
> Convert the ISL12026 RTC binding from text format to YAML schema.
> Remove the legacy text binding.
> 
> The new schema enables dtbs_check validation.
> 
> Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
> ---
> 
> Changes in v3:
> - Removed unsupported select section
> 
> Changes in v2:
> - Fixed dt_binding_check warnings
> - Improved example formatting
> 
> Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>

Duplicate signature. Please run scripts/checkpatch.pl on the patches and
fix reported warnings. After that, run also 'scripts/checkpatch.pl
--strict' on the patches and (probably) fix more warnings. Some warnings
can be ignored, especially from --strict run, but the code here looks
like it needs a fix. Feel free to get in touch if the warning is not
clear.

Rest is fine and duplicated SoB might be just ignored due to cut
separator.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Alexandre Belloni]

On Sat, 28 Feb 2026 00:21:15 +0530, Piyush Patle wrote:
> Convert the ISL12026 RTC binding from text format to YAML schema.
> Remove the legacy text binding.
> 
> The new schema enables dtbs_check validation.
> 
> 

Applied, thanks!

[1/1] dt-bindings: rtc: isl12026: convert to YAML schema
      https://git.kernel.org/abelloni/c/5ff89ef425d1

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Piyush Patle]

Convert the ISL12026 RTC binding from text format to YAML schema.
Remove the legacy text binding.

The new schema enables dtbs_check validation.

Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>

---

Changes in v3:
- Removed unsupported select section

Changes in v2:
- Fixed dt_binding_check warnings
- Improved example formatting

---
 .../devicetree/bindings/rtc/isil,isl12026.txt | 28 ---------
 .../bindings/rtc/isil,isl12026.yaml           | 59 +++++++++++++++++++
 2 files changed, 59 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/isil,isl12026.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl12026.yaml

diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
deleted file mode 100644
index 2e0be45193bb..000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-ISL12026 I2C RTC/EEPROM
-
-ISL12026 is an I2C RTC/EEPROM combination device.  The RTC and control
-registers respond at bus address 0x6f, and the EEPROM array responds
-at bus address 0x57.  The canonical "reg" value will be for the RTC portion.
-
-Required properties supported by the device:
-
- - "compatible": must be "isil,isl12026"
- - "reg": I2C bus address of the device (always 0x6f)
-
-Optional properties:
-
- - "isil,pwr-bsw": If present PWR.BSW bit must be set to the specified
-                   value for proper operation.
-
- - "isil,pwr-sbib": If present PWR.SBIB bit must be set to the specified
-                    value for proper operation.
-
-
-Example:
-
-	rtc@6f {
-		compatible = "isil,isl12026";
-		reg = <0x6f>;
-		isil,pwr-bsw = <0>;
-		isil,pwr-sbib = <1>;
-	}
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
new file mode 100644
index 000000000000..152edce2ab41
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl12026.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL12026 I2C RTC/EEPROM
+
+maintainers:
+  - Piyush Patle <piyushpatle228@gmail.com>
+
+description:
+  The ISL12026 is a combination RTC and EEPROM device connected via I2C.
+  The RTC and control registers respond at address 0x6f, while the EEPROM
+  array responds at address 0x57. The "reg" property refers to the RTC
+  portion of the device.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: isil,isl12026
+
+  reg:
+    maxItems: 1
+    description: I2C address of the RTC portion (must be 0x6f)
+
+  isil,pwr-bsw:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Value written to the PWR.BSW bit for proper device operation.
+
+  isil,pwr-sbib:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Value written to the PWR.SBIB bit for proper device operation.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "isil,isl12026";
+            reg = <0x6f>;
+            isil,pwr-bsw = <0>;
+            isil,pwr-sbib = <1>;
+        };
+    };
-- 
2.34.1

Re: [PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Krzysztof Kozlowski]

On 28/02/2026 14:13, Piyush Patle wrote:
> Convert the ISL12026 RTC binding from text format to YAML schema.
> Remove the legacy text binding.
> 
> The new schema enables dtbs_check validation.
> 
> Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
> 
> ---
> 
> Changes in v3:


You already sent it and you got review, so now that duplicate posting
AFTER my review basically removes it.

I will not be doing work twice.

NAK for this patch

Best regards,
Krzysztof

Re: [PATCH v2] dt-bindings: rtc: isl12026: convert to YAML schema

[Krzysztof Kozlowski]

On Thu, Feb 19, 2026 at 11:21:15AM +0530, Piyush Patle wrote:
> diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
> new file mode 100644
> index 000000000000..a6822605fd72
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
> @@ -0,0 +1,64 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/isil,isl12026.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intersil ISL12026 I2C RTC/EEPROM
> +
> +maintainers:
> +  - Piyush Patle <piyushpatle228@gmail.com>
> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The ISL12026 is a combination RTC and EEPROM device connected via I2C.
> +  The RTC and control registers respond at address 0x6f, while the EEPROM
> +  array responds at address 0x57. The "reg" property refers to the RTC
> +  portion of the device.
> +
> +select:
> +  properties:
> +    compatible:
> +      const: isil,isl12026
> +  required:
> +    - compatible

Why do you have this select? Look at existing bindings - NONE have that.

Just in case if that was not obvious: don't send us AI microslop.

> +
> +allOf:
> +  - $ref: rtc.yaml#

Best regards,
Krzysztof

[PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Piyush Patle]

Convert the ISL12026 RTC binding from text format to YAML schema.
Remove the legacy text binding.

The new schema enables dtbs_check validation.
---
Changes in v2:
- Fixed schema validation issues pointed out in review
- Improved example node formatting
- Removed redundant description text

---
Changes in v3:
- Dropped unnecessary block scalar ('|') in description
- Removed unsupported select section to match existing RTC bindings
- Aligned schema structure with other RTC YAML bindings
- Fixed YAML formatting and dt_binding_check errors

Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
---
 .../devicetree/bindings/rtc/isil,isl12026.txt | 28 --------
 .../bindings/rtc/isil,isl12026.yaml           | 64 +++++++++++++++++++
 2 files changed, 64 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/isil,isl12026.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl12026.yaml

diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt b/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
deleted file mode 100644
index 2e0be45193bb..000000000000
--- a/Documentation/devicetree/bindings/rtc/isil,isl12026.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-ISL12026 I2C RTC/EEPROM
-
-ISL12026 is an I2C RTC/EEPROM combination device.  The RTC and control
-registers respond at bus address 0x6f, and the EEPROM array responds
-at bus address 0x57.  The canonical "reg" value will be for the RTC portion.
-
-Required properties supported by the device:
-
- - "compatible": must be "isil,isl12026"
- - "reg": I2C bus address of the device (always 0x6f)
-
-Optional properties:
-
- - "isil,pwr-bsw": If present PWR.BSW bit must be set to the specified
-                   value for proper operation.
-
- - "isil,pwr-sbib": If present PWR.SBIB bit must be set to the specified
-                    value for proper operation.
-
-
-Example:
-
-	rtc@6f {
-		compatible = "isil,isl12026";
-		reg = <0x6f>;
-		isil,pwr-bsw = <0>;
-		isil,pwr-sbib = <1>;
-	}
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
new file mode 100644
index 000000000000..a6822605fd72
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl12026.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/isil,isl12026.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL12026 I2C RTC/EEPROM
+
+maintainers:
+  - Piyush Patle <piyushpatle228@gmail.com>
+
+description: |
+  The ISL12026 is a combination RTC and EEPROM device connected via I2C.
+  The RTC and control registers respond at address 0x6f, while the EEPROM
+  array responds at address 0x57. The "reg" property refers to the RTC
+  portion of the device.
+
+select:
+  properties:
+    compatible:
+      const: isil,isl12026
+  required:
+    - compatible
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: isil,isl12026
+
+  reg:
+    maxItems: 1
+    description: I2C address of the RTC portion (must be 0x6f)
+
+  isil,pwr-bsw:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Value written to the PWR.BSW bit for proper device operation.
+
+  isil,pwr-sbib:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Value written to the PWR.SBIB bit for proper device operation.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "isil,isl12026";
+            reg = <0x6f>;
+            isil,pwr-bsw = <0>;
+            isil,pwr-sbib = <1>;
+        };
+    };
-- 
2.34.1

Re: [PATCH v3] dt-bindings: rtc: isl12026: convert to YAML schema

[Krzysztof Kozlowski]

On Fri, Feb 20, 2026 at 02:17:23PM +0530, Piyush Patle wrote:
> Convert the ISL12026 RTC binding from text format to YAML schema.
> Remove the legacy text binding.
> 
> The new schema enables dtbs_check validation.
> ---
> Changes in v2:
> - Fixed schema validation issues pointed out in review
> - Improved example node formatting
> - Removed redundant description text
> 
> ---
> Changes in v3:
> - Dropped unnecessary block scalar ('|') in description
> - Removed unsupported select section to match existing RTC bindings

Where?

> - Aligned schema structure with other RTC YAML bindings
> - Fixed YAML formatting and dt_binding_check errors
> 
> Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>

Do not attach (thread) your patchsets to some other threads (unrelated
or older versions). This buries them deep in the mailbox and might
interfere with applying entire sets. See also:
https://elixir.bootlin.com/linux/v6.16-rc2/source/Documentation/process/submitting-patches.rst#L830

Best regards,
Krzysztof