From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm1-f46.google.com (mail-wm1-f46.google.com [209.85.128.46]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1A5792FB97B for ; Fri, 6 Mar 2026 13:34:16 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.46 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772804058; cv=none; b=V/4wz4keExW62OMcV31IuIrcd/qgMz3PyMNt/1KSBSfoV/cZsIUKSr2Kw/t/kLNpEDcMPh6mAX8Vfg+Jnau+ugrmqMHmc3T8VO/TpgkvZuhqZ8YtnkTVtd4BeTtBy9xU8yN/ze9snCEXFpwhumlpYUZlIWdw4NXzq2J/Sux3MqM= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1772804058; c=relaxed/simple; bh=ph6zuP6F0f841JU6jbvip1lVe4NdAfa+AXBl7WT5uuU=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=Jtsd6BeppK8gKwdGaUnjiz9WNX8pitbBeer/K8/aswmBg/LxLmnONRkDL0SxhaybB4MrlUoZ9lYbpmxX3WN4w42ExXsKLTh6jzOlpgxRbfKjsL3qm9SH7k56GKR3LKlLtLQhka3rYQJ/QCtImN3OqcJqsOWIVpHoPnphGnLexLs= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=jsgfZdGH; arc=none smtp.client-ip=209.85.128.46 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="jsgfZdGH" Received: by mail-wm1-f46.google.com with SMTP id 5b1f17b1804b1-4806cc07ce7so106294465e9.1 for ; Fri, 06 Mar 2026 05:34:16 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1772804055; x=1773408855; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=qZBcwSima1Ck+pzqyaz+VDU2kW96ftT9STnzniKpHy8=; b=jsgfZdGHnELgRfOH+RxM9FoxuuITJA+w2mIPQAAA1mGlz/JW8SAukUlT2uR3LiiAfZ 49EQ+gW3uT0HBr/WRMhEXRZveko6LnGAGlVu5cNAUtB98J/xsvCqAqMCN1W2bwVD6GAq 6IUE7oLxFkxygKw/Q+kww+oRLNls5FoTHItOrQmitU1qq+c70h8fQVs9d9CNN/vcbpCZ BxGoYi8T9BCqTPcyYpUdioD3dg7/egVWyegk1WDMmp0YabjVMRzDWyzMpiAdojS5+9Db 6CjEfND3qQEF1yjmq4EmA270e1hY63aodWZcF0jO5/R/e29ehn5y/tkTYe/9TJOgFKr0 cYug== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1772804055; x=1773408855; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to; bh=qZBcwSima1Ck+pzqyaz+VDU2kW96ftT9STnzniKpHy8=; b=lQ6Y5xchltcKc7MvSegDTMAl8KL6iWm+dt626gcvI50ilCSleLyT8JAVZx6+jT/+XH ZlKadtEKzh1Z3JozmXjmQ4xgJcYTl9jeGchVE/8CPgoLTwOH/AYXFa/IZVIgenvG8nzn wxEyrynOuUWC8sqkTJeA16kwYCPlpjJSzMA5JOMJUXJy97+LXNQaXt1kVjlRcBDm5vXd Rf+sAvy0ijH4oxQihy0Ip179oXk5xkBI1ZW9zWRrW+p1FYszx4VxJRG4Yzh40MJzOCNf tl5yqouN4LUAooejRXeDtNQ6kbZXDni+0gwlm1WQq0cQV/740Pe3sdXfB1lzZmMB7xrT qY7w== X-Forwarded-Encrypted: i=1; AJvYcCX+7WlTUjGeWaPfhON/Ya6bktW6mp/YzhafPqkl6G+y92A7XbuDBo6mkS8sqoFP1PzQLazyOgPxicQ=@vger.kernel.org X-Gm-Message-State: AOJu0YzsG/VTARCGQceejLS7Vlk7ey7jG2mvTbaD6APjezxVtk5t6l8U hyQFIxvdDMKWbyLea6eFnR1ClC+/qzArQ1BrplXTWqypJqOwr1/VFul7 X-Gm-Gg: ATEYQzwOWyWtNH8i0Ka4cM7zr3rgUnDHzwh80apj1sTRW7TohlflQTNeQg67rpFwYrW mEUmoqjsenWx6gQoqVEdVBXVdz9F2WQC1dwqc8XYccnEITMzoEThRgViJ+w7k6qSPISOsZQcBoe IkkjbMOY8y/JkSn0xro55UihJ9f3a9p09bXa0BAFwTZSrQh2paO4SN5hpyyFJSKjcd7qIxjouyU EWWbXxgrxeHoq8yuKELOWuqGgmILaM6BaPhvDPVYOOjRwwCleUIIZ7Io6rcxei2y8JSjRwdvPn+ JMuTyqCcepo+4jJsD6+08BqKFU7SdR2eh6TAD9MYdmdnyE6Iz2RG03DELvtXx8AaVbuftuYUKHI z32/QBH7RKjIF222x7rdHFdLZllpD7dguiZlcOgYHe3vu67tpDGTn7/O2aVPoqXGK1DBqU+bIIr hlYTc3nhjVEcna X-Received: by 2002:a05:600c:c10d:b0:485:2af3:3f8f with SMTP id 5b1f17b1804b1-4852af34095mr2453845e9.6.1772804055240; Fri, 06 Mar 2026 05:34:15 -0800 (PST) Received: from xeon ([188.163.112.72]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-48527681a3esm80856735e9.4.2026.03.06.05.34.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 06 Mar 2026 05:34:14 -0800 (PST) From: Svyatoslav Ryhel To: Linus Walleij , Bartosz Golaszewski , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Lee Jones , Liam Girdwood , Mark Brown , "Rafael J. Wysocki" , Daniel Lezcano , Zhang Rui , Lukasz Luba , Chanwoo Choi , Alexandre Belloni , Svyatoslav Ryhel Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v3 1/6] regulator: dt-binding: regulator-max77620: convert to DT schema Date: Fri, 6 Mar 2026 15:33:46 +0200 Message-ID: <20260306133351.31589-2-clamor95@gmail.com> X-Mailer: git-send-email 2.51.0 In-Reply-To: <20260306133351.31589-1-clamor95@gmail.com> References: <20260306133351.31589-1-clamor95@gmail.com> Precedence: bulk X-Mailing-List: linux-rtc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Convert regulator-max77620 devicetree bindings for the MAX77620 PMIC from TXT to YAML format. This patch does not change any functionality; the bindings remain the same. Signed-off-by: Svyatoslav Ryhel --- .../regulator/maxim,max77620-regulator.yaml | 99 ++++++++ .../bindings/regulator/regulator-max77620.txt | 222 ------------------ 2 files changed, 99 insertions(+), 222 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77620-regulator.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77620-regulator.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77620-regulator.yaml new file mode 100644 index 000000000000..e8c374cfaef9 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77620-regulator.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77620-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator for MAX77620 Power management IC from Maxim Semiconductor. + +maintainers: + - Svyatoslav Ryhel + +description: + Device has multiple DCDC(sd[0-3]) and LDOs(ldo[0-8]). The input supply + of these regulators are defined under parent device node. Details of + regulator properties are defined as child node under sub-node "regulators" + which is child node of device node. + +patternProperties: + "^in-(sd[0-3]|ldo(0-1|2|3-5|4-6|7-8))-supply$": + $ref: /schemas/types.yaml#/definitions/phandle + description: Input supply for DCDC or LDO + + "^(sd[0-3]|ldo[0-8])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + maxim,active-fps-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + FPS source for the GPIOs to get enabled/disabled when system is in + active state. Valid values are: + - MAX77620_FPS_SRC_0: FPS source is FPS0. + - MAX77620_FPS_SRC_1: FPS source is FPS1 + - MAX77620_FPS_SRC_2: FPS source is FPS2 + - MAX77620_FPS_SRC_NONE: GPIO is not controlled by FPS events and + it gets enabled/disabled by register access. + Absence of this property will leave the FPS configuration register + for that GPIO to default configuration. + + maxim,active-fps-power-up-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Sequencing event slot number on which the GPIO get enabled when + master FPS input event set to HIGH. This is applicable if FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,active-fps-power-down-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Sequencing event slot number on which the GPIO get disabled when + master FPS input event set to LOW. This is applicable if FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,suspend-fps-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This is same as property "maxim,active-fps-source" but value get + configured when system enters in to suspend state. + + maxim,suspend-fps-power-up-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This is same as property "maxim,active-fps-power-up-slot" but this + value get configured into FPS configuration register when system + enters into suspend. This is applicable if suspend state FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,suspend-fps-power-down-slot: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + This is same as property "maxim,active-fps-power-down-slot" but this + value get configured into FPS configuration register when system + enters into suspend. This is applicable if suspend state FPS source + is selected as FPS0, FPS1 or FPS2. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + maxim,ramp-rate-setting: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Ramp rate(uV/us) setting to be configured to the device. The platform + may have different ramp rate than advertised ramp rate if it has design + variation from Maxim's recommended. On this case, platform specific + ramp rate is used for ramp time calculation and this property is used + for device register configurations. The measured ramp rate of platform + is provided by the regulator-ramp-delay. + + Maxim Max77620 supports following ramp delay: + SD: 13.75mV/us, 27.5mV/us, 55mV/us + LDOs: 5mV/us, 100mV/us + enum: [5000, 13750, 27500, 55000, 100000] + +additionalProperties: false + +# see maxim,max77620.yaml for an example diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt deleted file mode 100644 index bcf788897e44..000000000000 --- a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt +++ /dev/null @@ -1,222 +0,0 @@ -Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor. - -Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply -of these regulators are defined under parent device node. -Details of regulator properties are defined as child node under -sub-node "regulators" which is child node of device node. - -Please refer file -for common regulator bindings used by client. - -Following are properties of parent node related to regulators. - -Optional properties: -------------------- -The input supply of regulators are the optional properties on the -parent device node. The input supply of these regulators are provided -through following properties: -in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins. -in-sd1-supply: Input supply for SD1. -in-sd2-supply: Input supply for SD2. -in-sd3-supply: Input supply for SD3. -in-ldo0-1-supply: Input supply for LDO0 and LDO1. -in-ldo2-supply: Input supply for LDO2. -in-ldo3-5-supply: Input supply for LDO3 and LDO5 -in-ldo4-6-supply: Input supply for LDO4 and LDO6. -in-ldo7-8-supply: Input supply for LDO7 and LDO8. - -Optional sub nodes for regulators under "regulators" subnode: ------------------------------------------------------------- -The subnodes name is the name of regulator and it must be one of: - sd[0-3], ldo[0-8] - -Each sub-node should contain the constraints and initialization -information for that regulator. The definition for each of these -nodes is defined using the standard binding for regulators found at -. - -There are also additional properties for SD/LDOs. These additional properties -are required to configure FPS configuration parameters for SDs and LDOs. -Please refer for more detail of Flexible -Power Sequence (FPS). -Following are additional properties: - -- maxim,active-fps-source: FPS source for the regulators to get - enabled/disabled when system is in - active state. Valid values are: - - MAX77620_FPS_SRC_0, - FPS source is FPS0. - - MAX77620_FPS_SRC_1, - FPS source is FPS1 - - MAX77620_FPS_SRC_2 and - FPS source is FPS2 - - MAX77620_FPS_SRC_NONE. - Regulator is not controlled - by FPS events and it gets - enabled/disabled by register - access. - Absence of this property will leave - the FPS configuration register for that - regulator to default configuration. - -- maxim,active-fps-power-up-slot: Sequencing event slot number on which - the regulator get enabled when - master FPS input event set to HIGH. - Valid values are 0 to 7. - This is applicable if FPS source is - selected as FPS0, FPS1 or FPS2. - -- maxim,active-fps-power-down-slot: Sequencing event slot number on which - the regulator get disabled when master - FPS input event set to LOW. - Valid values are 0 to 7. - This is applicable if FPS source is - selected as FPS0, FPS1 or FPS2. - -- maxim,suspend-fps-source: This is same as property - "maxim,active-fps-source" but value - get configured when system enters in - to suspend state. - -- maxim,suspend-fps-power-up-slot: This is same as property - "maxim,active-fps-power-up-slot" but - this value get configured into FPS - configuration register when system - enters into suspend. - This is applicable if suspend state - FPS source is selected as FPS0, FPS1 or - -- maxim,suspend-fps-power-down-slot: This is same as property - "maxim,active-fps-power-down-slot" but - this value get configured into FPS - configuration register when system - enters into suspend. - This is applicable if suspend state - FPS source is selected as FPS0, FPS1 or - FPS2. -- maxim,ramp-rate-setting: integer, ramp rate(uV/us) setting to be - configured to the device. - The platform may have different ramp - rate than advertised ramp rate if it has - design variation from Maxim's - recommended. On this case, platform - specific ramp rate is used for ramp time - calculation and this property is used - for device register configurations. - The measured ramp rate of platform is - provided by the regulator-ramp-delay - as described in . - Maxim Max77620 supports following ramp - delay: - SD: 13.75mV/us, 27.5mV/us, 55mV/us - LDOs: 5mV/us, 100mV/us - -Note: If the measured ramp delay is same as advertised ramp delay then it is not -required to provide the ramp delay with property "maxim,ramp-rate-setting". The -ramp rate can be provided by the regulator-ramp-delay which will be used for -ramp time calculation for voltage change as well as for device configuration. - -Example: --------- -#include -... -max77620@3c { - in-ldo0-1-supply = <&max77620_sd2>; - in-ldo7-8-supply = <&max77620_sd2>; - regulators { - sd0 { - regulator-name = "vdd-core"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - regulator-always-on; - maxim,active-fps-source = ; - }; - - sd1 { - regulator-name = "vddio-ddr"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - maxim,active-fps-source = ; - }; - - sd2 { - regulator-name = "vdd-pre-reg"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - }; - - sd3 { - regulator-name = "vdd-1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo0 { - regulator-name = "avdd-sys"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo1 { - regulator-name = "vdd-pex"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo2 { - regulator-name = "vddio-sdmmc3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - ldo3 { - regulator-name = "vdd-cam-hv"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo4 { - regulator-name = "vdd-rtc"; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo5 { - regulator-name = "avdd-ts-hv"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo6 { - regulator-name = "vdd-ts"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo7 { - regulator-name = "vdd-gen-pll-edp"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo8 { - regulator-name = "vdd-hdmi-dp"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - }; -}; -- 2.51.0