From: Hugo Villeneuve <hugo@hugovil.com>
To: alexandre.belloni@bootlin.com
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org,
hugo@hugovil.com, bruno.thomsen@gmail.com,
giampiero@sferalabs.cc, p.rosenberger@kunbus.com,
antonio@amsobr.com, Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: [PATCH 2/4] rtc: pcf2127: add pcf2127_pwrmng_get/set
Date: Wed, 11 Mar 2026 16:02:28 -0400 [thread overview]
Message-ID: <20260311200237.3531981-3-hugo@hugovil.com> (raw)
In-Reply-To: <20260311200237.3531981-1-hugo@hugovil.com>
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Add common functions to get/set the pwrmng field in the CTRL3 register,
used by pcf2127_param_get() and pcf2127_param_set().
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
These functions will also be used in the following patch
to add battery low detection.
---
drivers/rtc/rtc-pcf2127.c | 42 +++++++++++++++++++++++++++------------
1 file changed, 29 insertions(+), 13 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index e2e9746027348..0605295026564 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -213,6 +213,30 @@ struct pcf2127 {
bool ts_valid[PCF2127_MAX_TS_SUPPORTED]; /* Timestamp valid indication. */
};
+static int pcf2127_pwrmng_get(struct device *dev, u8 *pwrmng)
+{
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+ u32 value;
+ int ret;
+
+ ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &value);
+ if (ret < 0)
+ return ret;
+
+ *pwrmng = FIELD_GET(PCF2127_CTRL3_PM, value);
+
+ return 0;
+}
+
+static int pcf2127_pwrmng_set(struct device *dev, u8 pwrmng)
+{
+ struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
+
+ return regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
+ PCF2127_CTRL3_PM,
+ FIELD_PREP(PCF2127_CTRL3_PM, pwrmng));
+}
+
/*
* In the routines that deal directly with the pcf2127 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
@@ -337,18 +361,15 @@ static int pcf2127_rtc_set_time(struct device *dev, struct rtc_time *tm)
static int pcf2127_param_get(struct device *dev, struct rtc_param *param)
{
- struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
- u32 value;
+ u8 value;
int ret;
switch (param->param) {
case RTC_PARAM_BACKUP_SWITCH_MODE:
- ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &value);
+ ret = pcf2127_pwrmng_get(dev, &value);
if (ret < 0)
return ret;
- value = FIELD_GET(PCF2127_CTRL3_PM, value);
-
if (value < 0x3)
param->uvalue = RTC_BSM_LEVEL;
else if (value < 0x6)
@@ -367,19 +388,16 @@ static int pcf2127_param_get(struct device *dev, struct rtc_param *param)
static int pcf2127_param_set(struct device *dev, struct rtc_param *param)
{
- struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
u8 mode = 0;
- u32 value;
+ u8 value;
int ret;
switch (param->param) {
case RTC_PARAM_BACKUP_SWITCH_MODE:
- ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL3, &value);
+ ret = pcf2127_pwrmng_get(dev, &value);
if (ret < 0)
return ret;
- value = FIELD_GET(PCF2127_CTRL3_PM, value);
-
if (value > 5)
value -= 5;
else if (value > 2)
@@ -400,9 +418,7 @@ static int pcf2127_param_set(struct device *dev, struct rtc_param *param)
return -EINVAL;
}
- return regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL3,
- PCF2127_CTRL3_PM,
- FIELD_PREP(PCF2127_CTRL3_PM, mode + value));
+ return pcf2127_pwrmng_set(dev, mode + value);
default:
return -EINVAL;
--
2.47.3
next prev parent reply other threads:[~2026-03-11 20:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-11 20:02 [PATCH 0/4] rtc: pcf2127: add support for battery low voltage detection Hugo Villeneuve
2026-03-11 20:02 ` [PATCH 1/4] rtc: pcf2127: remove redundant break statement in switch-case Hugo Villeneuve
2026-03-11 20:02 ` Hugo Villeneuve [this message]
2026-03-11 20:02 ` [PATCH 3/4] rtc: add battery low voltage detection feature Hugo Villeneuve
2026-03-11 20:02 ` [PATCH 4/4] rtc: pcf2127: support battery low voltage detection function Hugo Villeneuve
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260311200237.3531981-3-hugo@hugovil.com \
--to=hugo@hugovil.com \
--cc=alexandre.belloni@bootlin.com \
--cc=antonio@amsobr.com \
--cc=bruno.thomsen@gmail.com \
--cc=giampiero@sferalabs.cc \
--cc=hvilleneuve@dimonoff.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=p.rosenberger@kunbus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox