From: Rosen Penev <rosenp@gmail.com>
To: linux-rtc@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
linux-stm32@st-md-mailman.stormreply.com (moderated
list:ARM/STM32 ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:ARM/STM32
ARCHITECTURE), linux-kernel@vger.kernel.org (open list)
Subject: [PATCHv3] rtc: stmp3xxx: use devm_platform_ioremap_resource()
Date: Wed, 29 Jul 2026 15:51:59 -0700 [thread overview]
Message-ID: <20260729225159.775183-1-rosenp@gmail.com> (raw)
Replace the open-coded platform_get_resource() plus devm_ioremap()
sequence with a single devm_platform_ioremap_resource() call, which folds
the resource lookup and mapping into one step and returns an ERR_PTR on
failure, checked with IS_ERR() and propagated via PTR_ERR().
Move the mapping ahead of the devm_kzalloc() so that an error or deferred
probe is handled before the rtc_data allocation, avoiding needless work.
The fsl,stmp3xxx-rtc nodes in imx23.dtsi (reg = <0x8005c000 0x2000>) and
imx28.dtsi (reg = <0x80056000 0x2000>) each provide a single
non-overlapping IORESOURCE_MEM window, so the region reservation now
performed by devm_platform_ioremap_resource() introduces no conflict.
Remove irq_alarm from private struct. It's only used in _probe. Also add
check for platform_get_irq() errors.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
v3: add missing variable in probe
v2: add platform_get_irq error check
drivers/rtc/rtc-stmp3xxx.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/drivers/rtc/rtc-stmp3xxx.c b/drivers/rtc/rtc-stmp3xxx.c
index 7afcd14aeee5..a8ca681b574f 100644
--- a/drivers/rtc/rtc-stmp3xxx.c
+++ b/drivers/rtc/rtc-stmp3xxx.c
@@ -56,7 +56,6 @@
struct stmp3xxx_rtc_data {
struct rtc_device *rtc;
void __iomem *io;
- int irq_alarm;
};
#if IS_ENABLED(CONFIG_STMP3XXX_RTC_WATCHDOG)
@@ -245,29 +244,26 @@ static void stmp3xxx_rtc_remove(struct platform_device *pdev)
static int stmp3xxx_rtc_probe(struct platform_device *pdev)
{
struct stmp3xxx_rtc_data *rtc_data;
- struct resource *r;
+ void __iomem *io;
u32 rtc_stat;
u32 pers0_set, pers0_clr;
u32 crystalfreq = 0;
+ int irq_alarm;
int err;
+ irq_alarm = platform_get_irq(pdev, 0);
+ if (irq_alarm < 0)
+ return irq_alarm;
+
+ io = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(io))
+ return PTR_ERR(io);
+
rtc_data = devm_kzalloc(&pdev->dev, sizeof(*rtc_data), GFP_KERNEL);
if (!rtc_data)
return -ENOMEM;
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r) {
- dev_err(&pdev->dev, "failed to get resource\n");
- return -ENXIO;
- }
-
- rtc_data->io = devm_ioremap(&pdev->dev, r->start, resource_size(r));
- if (!rtc_data->io) {
- dev_err(&pdev->dev, "ioremap failed\n");
- return -EIO;
- }
-
- rtc_data->irq_alarm = platform_get_irq(pdev, 0);
+ rtc_data->io = io;
rtc_stat = readl(rtc_data->io + STMP3XXX_RTC_STAT);
if (!(rtc_stat & STMP3XXX_RTC_STAT_RTC_PRESENT)) {
@@ -354,13 +350,10 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev)
if (IS_ERR(rtc_data->rtc))
return PTR_ERR(rtc_data->rtc);
- err = devm_request_irq(&pdev->dev, rtc_data->irq_alarm,
+ err = devm_request_irq(&pdev->dev, irq_alarm,
stmp3xxx_rtc_interrupt, 0, "RTC alarm", &pdev->dev);
- if (err) {
- dev_err(&pdev->dev, "Cannot claim IRQ%d\n",
- rtc_data->irq_alarm);
+ if (err)
return err;
- }
rtc_data->rtc->ops = &stmp3xxx_rtc_ops;
rtc_data->rtc->range_max = U32_MAX;
--
2.55.0
next reply other threads:[~2026-07-29 22:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 22:51 Rosen Penev [this message]
2026-07-29 23:00 ` [PATCHv3] rtc: stmp3xxx: use devm_platform_ioremap_resource() sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729225159.775183-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox