[PATCH v4 1/2] dt-bindings: rtc: Add property for Raspberry Pi 5 RTC

[Sander Speetjens <sander.speetjens@gmail.com>]

The Raspberry Pi 5 has a built-in RTC that can be battery-backed
via the VBAT pin. When a rechargeable coin cell is used, the
hardware requires a trickle-charge voltage to keep the battery
topped up.

Expose the trickle-voltage-millivolt DT property so the driver can
program the correct charge voltage for board specific configurations with
the attached battery.

Signed-off-by: Sander Speetjens <sander.speetjens@gmail.com>
---
V3 -> V4: Add a reff to uint32

V2 -> V3: Fixed the firmware property naming

V1 -> V2: As discussed with Krzysztof Kozlowski, this property is folded into
the existing raspberrypi,bcm2835-firmware properties.

 .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml    | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 983ea80eaec9..9349fc8908a5 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -133,6 +133,13 @@ properties:
     required:
       - compatible
 
+  trickle-voltage-millivolt:
+    allOf:
+      - $ref: /schemas/rtc/rtc.yaml#/properties/trickle-voltage-millivolt
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 1300
+        maximum: 5000
+
 required:
   - compatible
   - mboxes
@@ -144,6 +151,7 @@ examples:
     firmware {
         compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
         mboxes = <&mailbox>;
+        trickle-voltage-millivolt = <3300>;
 
         firmware_clocks: clocks {
             compatible = "raspberrypi,firmware-clocks";
-- 
2.55.0