From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Imre Kaloz <kaloz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org,
Lee Jones <lee@kernel.org>,
linux-rtc@vger.kernel.org
Subject: Re: [PATCH v2 30/53] rtc: m48t35: support the SGI IP35 timekeeper's 1968 year base
Date: Tue, 13 Oct 2026 16:28:55 +0200 [thread overview]
Message-ID: <2026101314285588f70d85@mail.local> (raw)
In-Reply-To: <271bf55b479fbfd9b934e93a13eb8e96eb64e9fb.1791890466.git.kaloz@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 3838 bytes --]
Hello,
On 13/10/2026 15:16:50+0200, Imre Kaloz wrote:
> The M48T35 of SGI IP35-family machines counts its year from 1968. Take
> the epoch from a platform id table, "rtc-m48t35" for IP27 and
> "rtc-m48t35-ip35" for IP35, and bound the year to the part's century: on
> IP27 a year past 2069 now fails to set.
>
> Signed-off-by: Imre Kaloz <kaloz@kernel.org>
> ---
> drivers/rtc/rtc-m48t35.c | 33 +++++++++++++++++++--------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/rtc/rtc-m48t35.c b/drivers/rtc/rtc-m48t35.c
> index 92f19bf997b2..fa228a2bb527 100644
> --- a/drivers/rtc/rtc-m48t35.c
> +++ b/drivers/rtc/rtc-m48t35.c
> @@ -49,6 +49,7 @@ struct m48t35_priv {
> struct m48t35_rtc __iomem *reg;
> size_t size;
> unsigned long baseaddr;
> + unsigned int epoch;
> spinlock_t lock;
> };
>
> @@ -86,10 +87,7 @@ static int m48t35_read_time(struct device *dev, struct rtc_time *tm)
> * Account for differences between how the RTC uses the values
> * and how they are defined in a struct rtc_time;
> */
> - tm->tm_year += 70;
> - if (tm->tm_year <= 69)
> - tm->tm_year += 100;
> -
> + tm->tm_year += priv->epoch - 1900;
> tm->tm_mon--;
> return 0;
> }
> @@ -108,18 +106,10 @@ static int m48t35_set_time(struct device *dev, struct rtc_time *tm)
> min = tm->tm_min;
> sec = tm->tm_sec;
>
> - if (yrs < 1970)
> - return -EINVAL;
> -
> - yrs -= 1970;
> - if (yrs > 255) /* They are unsigned */
> - return -EINVAL;
> -
> - if (yrs > 169)
> + if (yrs < priv->epoch || yrs >= priv->epoch + 100)
> return -EINVAL;
>
> - if (yrs >= 100)
> - yrs -= 100;
> + yrs -= priv->epoch;
>
Instead of open coding, you should use start_secs after setting the rtc
range in probe(). attached i a patch I refreshed for the
devm_rtc_allocate_device/devm_rtc_register_device conversion that you
can include in this series. drivers/rtc/rtc-mt6397.c is an example that
should be working for you.
I never sent the patch because it is not clear from the datasheet how
well leap year calculation works. My guess is that it worked in 2000 but
fails in 2100.
> sec = bin2bcd(sec);
> min = bin2bcd(min);
> @@ -149,9 +139,13 @@ static const struct rtc_class_ops m48t35_ops = {
>
> static int m48t35_probe(struct platform_device *pdev)
> {
> + const struct platform_device_id *id = platform_get_device_id(pdev);
> struct resource *res;
> struct m48t35_priv *priv;
>
> + if (!id)
> + return -ENODEV;
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res)
> return -ENODEV;
> @@ -164,6 +158,7 @@ static int m48t35_probe(struct platform_device *pdev)
> pdev->name))
> return -EBUSY;
>
> + priv->epoch = id->driver_data;
> priv->baseaddr = res->start;
> priv->reg = devm_ioremap(&pdev->dev, priv->baseaddr, priv->size);
> if (!priv->reg)
> @@ -178,11 +173,20 @@ static int m48t35_probe(struct platform_device *pdev)
> return PTR_ERR_OR_ZERO(priv->rtc);
> }
>
> +/* The year register on SGI IP35-family machines counts from 1968. */
> +static const struct platform_device_id m48t35_id_table[] = {
> + { "rtc-m48t35", 1970 },
> + { "rtc-m48t35-ip35", 1968 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(platform, m48t35_id_table);
> +
> static struct platform_driver m48t35_platform_driver = {
> .driver = {
> .name = "rtc-m48t35",
> },
> .probe = m48t35_probe,
> + .id_table = m48t35_id_table,
> };
>
> module_platform_driver(m48t35_platform_driver);
> @@ -191,3 +195,4 @@ MODULE_AUTHOR("Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
> MODULE_DESCRIPTION("M48T35 RTC driver");
> MODULE_LICENSE("GPL");
> MODULE_ALIAS("platform:rtc-m48t35");
> +MODULE_ALIAS("platform:rtc-m48t35-ip35");
> --
> 2.47.3
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: 0001-rtc-m48t35-switch-to-devm_rtc_allocate_device.patch --]
[-- Type: text/plain, Size: 1183 bytes --]
From 7aed40aa17edfdd132ad10f6fb1ca9f1f1ddac07 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Tue, 13 Oct 2026 16:21:06 +0200
Subject: [PATCH] rtc: m48t35: switch to devm_rtc_allocate_device
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows
for further improvement of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-m48t35.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/rtc/rtc-m48t35.c b/drivers/rtc/rtc-m48t35.c
index 92f19bf997b2..0f4a3cb1e1f0 100644
--- a/drivers/rtc/rtc-m48t35.c
+++ b/drivers/rtc/rtc-m48t35.c
@@ -173,9 +173,13 @@ static int m48t35_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
- priv->rtc = devm_rtc_device_register(&pdev->dev, "m48t35",
- &m48t35_ops, THIS_MODULE);
- return PTR_ERR_OR_ZERO(priv->rtc);
+ priv->rtc = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(priv->rtc))
+ return PTR_ERR(priv->rtc);
+
+ priv->rtc->ops = &m48t35_ops;
+
+ return devm_rtc_register_device(priv->rtc);
}
static struct platform_driver m48t35_platform_driver = {
--
2.56.0
next prev parent reply other threads:[~2026-10-13 14:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 13:16 [PATCH v2 00/53] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines Imre Kaloz
2026-10-13 13:16 ` [PATCH v2 30/53] rtc: m48t35: support the SGI IP35 timekeeper's 1968 year base Imre Kaloz
2026-10-13 14:28 ` Alexandre Belloni [this message]
2026-10-13 13:35 ` [PATCH v2 00/53] MIPS: SGI-IP27: add support for the IP35 (Bedrock hub) machines Niklas Cassel
2026-10-13 14:25 ` Imre Kaloz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026101314285588f70d85@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=kaloz@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox